Fax/Data mode using a PC | 87 |
|
§Menu§fSetupfConnectivityf Fax/data mod.
With the phone connected to a PC, you can transmit and receive faxes (class 2) and data. Appropriate soft- ware for data communication/fax communication must be available on your PC and there must be a con- nection (e.g. IrDA, page 81) to the phone.
Fax and data services must be ena- bled by the service provider. Different networks support different types of fax/data reception, contact your service provider for details.
Fax/data mod. | ~ |
Your service provider must give you a number for telephoning and a fax/ data number.
Sending
Start your PC communication pro- gram and enter the required destina- tion phone number in the program.
Receiving
The call is signalled by a special ring- er and the type (fax or data) is dis- played.
Now start the communication pro- gram in your PC to receive the fax/ the data.
Speech/fax
Send
§Menu§fSetupfConnectivityf Fax/data mod.f
Send vce/fax
Set this function on the phone before transmission so that you can switch from voice mode to fax mode.
While the connection is being set up, the following soft key is available for two seconds:
§Voice/fx§ Switch to Send vce/fax mode; you may now send a fax.
Receive
(Only if a special fax or data number is not available).
Start the required communication program on your PC and switch on the function at the phone during the call (the PC accepts the connection).
§Menu§fSetupfConnectivityf Fax/data mod.f Voice/fax rec
End transmission
End transmission in the PC software and/or press S.