Bushnell SCOUT1000 manual Magnification and Coatings, Tripod Mount

Page 7

TIP: While pressing the POWER button, you can move the device slowly from object to object and intentionally force the laser to hit multiple objects to ensure that you are only displaying the furthest of the objects recognized by the laser.

Once the device has shut off, the unit will always default back to the last targeting mode used.

OPTICAL DESIGN

Magnification and Coatings

The Scout™1000 ARC™ features 5x magnification and Multi-Coated optics. A liquid crystal display (LCD) is mounted within the optical system and when activated, displays a reticle for targeting, yards / meters, and Mode indicators. Inherent in the manufacturing process are small black spots that appear in the optical system. These are a natural characteristic of the LCD and cannot be fully eliminated in the manufacturing process. They do not affect the distancing performance of the unit.

TRIPOD MOUNT

Molded into the bottom of your Scout™ 1000 is a threaded tripod mount that will allow you to attach a tripod for a more stable operation during long periods of use.

12

Scout 1000™ with ARC™ (Angle Range Compensation): In addition to all of the features described above, the Scout™ 1000 ARC™ is an advanced premium laser rangefinder featuring a built-in accelerometer-based inclinometer that digitally displays the exact angle from -60 to +60 degrees of elevation and is +/- 1.0 degree accurate.

The Bushnell® Scout™1000 with ARC™ solves a problem hunters have been faced with for years. The problem: Bow and rifle hunters have struggled with extreme uphill and downhill angles because of how these angles alter true horizontal distance to your target. The Solution: ARC’s integrated inclinometer provides elevation angle to allow for distance compensation when targeting objects that are either uphill or downhill. This data is then combined with internal algorithmic ballistic formulas.

ARC (Angle Range Compensation) Modes

Bow Mode ( ): Displays line of sight distance, degree of elevation, and true horizontal distance from 5-99 yards / meters and a maximum inclination of +/- 60°.

Rifle Mode ( ): Calculates and displays the amount of bullet drop, at the target in inches or centimeters. The amount of bullet drop is determined by the line of sight distance to the target, degree of elevation, along with the specific ballistic characteristics of the caliber and ammunition load. When you range your target, the line of sight, degree of elevation, and bullet-drop/holdover in inches or centimeters will be displayed from 100 to 800 yards/meters with a maximum inclination of +/- 60°. One of eight ballistic groups (identified as A, B, C, D, E, F, G, and H) for center fire rifles and two ballistic groups (Identified as I and J) for Black Powder / Muzzleloaders can be selected by the user, with each formula representing a given combination of caliber and loads. The ballistic groups are selected by the user in the SET-UP menu.

13

Image 7
Contents Scout 1000 Scout Power Eyepiece Mode Tripod Mount Ranging Accuracy HOW OUR Digital Technology Works Operational Summary Getting Started Inserting the Battery Adjusting the Eyepiece Liquid Crystal Display LCD IndicatorsActive Laser Unit of Measure OptionsSelective Targeting Modes Page Tripod Mount Magnification and CoatingsPage Rifle Mode Example BOW Mode ExampleKnowing Which Ballistic Group to Select Regular ModeWhat if your caliber is not listed? ExampleCleaning SpecificationsIf target range cannot be obtained If unit does not turn on LCD does not illuminateScout 1000 Scout MARCHE/ARRÊT alimentation Oculaire Mode Monture de trépied Précision EN Distance Comment Notre Technologie FonctionneIndicateurs DE L’AFFICHAGE À Cristaux Liquides LCD Comment Démarrer Mise EN Place DE LA PileRéglage DE L’OCULAIRE Fonctionnement EN BrefOptions D’UNITÉ DE Mesure Mode DE Visée SélectiveLaser Activé Page Monture DE Trépied Grossissement et traitementsNormal clignote au bas de l’écran Exemple DU Mode Fusil Exemple DU Mode TIR À L’ARCSavoir Quel Groupe Balistique Sélectionner Mode NormalEt si le calibre n’est pas sur la liste ? ExempleNettoyage CaractéristiquesSi la distance de la cible ne peut pas être obtenue Si l’appareil ne s’allume pas l’écran LCD ne s’active pasEspañol ON/OFF Encendido Ocular Modalidad Montura de trípode Exactitud DE LA Telemetría Cómo Funciona Nuestra Tecnología DigitalIndicadores DE LA Pantalla DE Cristal Líquido LCD Instrucciones Iniciales Cómo Introducir LA PilaCómo Ajustar EL Ocular Resumen OperacionalLáser Activo Opciones DE Unidad DE MedidaModalidades Selective Targeting Figura Adaptador DE Montaje EN Trípode Aumentos y recubrimientosUnidad DE Medida Ejemplo DE Modalidad Rifle Ejemplo DE Modalidad BOW ArcoCómo Saber QUÉ Grupo Balístico Seleccionar Modalidad Regular¿Qué hacer si su calibre no aparece en la lista? EjemploLimpieza EspecificacionesSi no se puede obtener la distancia al blanco Si la unidad no se enciende La pantalla LCD no se enciendeDeutsch AN/AUS Stromversorgung Ovular Modus Stativmontage Genauigkeit DER Entfernungsmessung Funktionsweise Unserer DigitaltechnologieEinstellen DES Okulars Inbetriebnahme Einsetzen DER BatterieZusammenfassung DER Funktionsweise LCD-ANZEIGEN Aktiver Laser MESSEINHEITS-OPTIONENSelektive Targeting Modi Page Stativmontage Vergrößerung und VergütungPage Beispiel GEWEHR-MODUS Beispiel BOGEN-MODUSDIE Wahl DER Richtigen Ballistischen Gruppe Normaler ModusIhr Kaliber ist nicht aufgeführt. Was nun? BeispielReinigung Technische DatenDie Zielentfernung lässt sich nicht feststellen 101102 104 106 105Descrizione Della Tecnologia Digitale Impiegata Regolazione DELL’OCULARE Indicatori SUL Display a Cristalli Liquidi LCD108 PER Iniziare Inserimento Della PilaModalità Selective Targeting 110Indicazione DELL’UNITÀ DI Misura Laser Attivoi112 Sostegno PER Treppiede 113114 Ingrandimento e trattamentoAcceso ed il messaggio lampeggerà sul display, in basso 116118 Esempio DI Modo Arco117 Esempio DI Modo Fucile120 Come Selezionare IL Gruppo Balistico Appropriato122 121Dati Tecnici 124Pulizia Se l’unità non si accende il LED non si illumina 126Se non si riesce a misurare la distanza dal bersaglio 127 129 Como Funciona Nossa Tecnologia Digital 131Resumo Operacional 133Como Começar Inserção DA Pilha Ajuste DA OcularModos Selective Targeting 135Opções DA Unidade DE Medida Laser AtivoFigura 137Montagem EM Tripé 138139 Ampliação e revestimentos141 Menu de Configuração Menu de operação normalExemplo do Modo Rifle Exemplo do Modo Arco143 145 Seleção do Grupo DE Balística Apropriado147 146Especificações 149Limpeza Unidade não liga o LCD não acende 151Se a leitura da distância do alvo não puder ser obtida