Sears NTL19010.0 user manual Console Base 87. Do not overtighten Screws

Page 10

6. Tighten two #8 x 3/4" Screws (1) into the

6

 

 

Console Base (87). Do not overtighten the

 

 

 

Screws.

 

 

 

Identify the right handrail assembly (B). Hold the

 

 

 

right handrail assembly near the right Upright

 

 

 

(77). Insert the wire from the right handrail as-

1

 

 

sembly into the hole in the top of the Upright

 

 

and out of the end of the Upright.

 

 

 

 

B

 

Wire

 

1

 

 

 

87

 

 

 

77

7. Set the right handrail assembly (B) onto the

7

 

 

right Upright (77). Make sure that no wires are

 

 

 

 

 

pinched. Attach the right handrail assembly

 

 

 

with two 3/8" x 5 1/2" Screws (5) and two 3/8"

 

 

 

Star Washers (8). Note: Start the lower Screw

 

 

 

first.

 

 

 

Connect the two “R” pulse wires.

B

 

 

 

“R”

 

 

 

Pulse

 

 

 

Wires

 

 

 

R

 

 

 

R

 

 

 

77

 

 

 

 

 

L

 

 

Console

 

 

8

Assembly

 

 

“L” Pulse

 

 

 

 

 

 

Wire

 

5

 

 

 

Start First

 

 

10

 

 

Image 10
Contents Model No. NTL19010.0 Serial No QUESTIONS?Call TOLL-FREE Table of Contents Important Precautions Page BEFORE YOU BEGIN Part Identification Chart Make sure that the power cord is unplugged AssemblySee the inset drawing. Tie the wire tie Screws, and then tighten them. Be careful Tie Pulse Wire Console Assembly Wire Tie 101 102 103 Console Base 87. Do not overtighten Screws Right Upright 77. Make sure that no wires areStar Washers 8. Note Start the lower Screw First Upright 77. Make sure that no wires are Washers 8. Note Start the lower Screw firstScrews and then tighten them Percent. Then, unplug the power cordAttach the Right Inside Cover and the Right Troubleshooting HOW to PUT on the Heart Rate MonitorCare and Maintenance Chest Heart Rate MonitorOperation AND ADJUSTMENT HOW to Plug in the Power CordFeatures of the Console DiagramConsole HOW to Turn on the Power HOW to USE the Touch ScreenCalibrate the incline system HOW to SET UP the CONSOLE Connect to your wireless network Check for firmware updates Create an iFit Live accountHOW to USE the Manual Mode Key from the console When you are finished exercising, removePlug the power cord. Important If you do not Do this, the incline trainer’s electrical compoSelect an onboard workout HOW to USE AN Onboard WorkoutStart the workout HOW to USE a SET-A-GOAL Workout Select the main menu. See on Select a set-a-goal workoutHOW to USE AN Ifit Live Workout Start the workout. See onHOW to USE the Equipment Settings Mode Calibrate the incline system of the incline trainer HOW to USE the Maintenance ModeExit the maintenance mode Find KeycodesSet up and manage a wireless network connection HOW to USE the Wireless Network ModeEnable Wi-Fi Exit the wireless network modeHOW to USE the Stereo Sound System HOW to USE the Internet BrowserHOW to Move the Incline Trainer Troubleshooting Symptom The power turns off during useSymptom The walking belt slows when walked on Page Workout Guidelines Exercise GuidelinesExercise Intensity Exercise FrequencySuggested Stretches Part List Qty DescriptionDescription Exploded Drawing a Exploded Drawing B 106 110 Exploded Drawing D Exploded Drawing E Limited Warranty Ordering Replacement PartsIcon Health & Fitness, Inc., 1500 S W., Logan, UT