HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the console’s speakers, you must connect your MP3 player, CD player, or other personal audio player to the console.
Locate the audio wire. Plug one end into the audio jack on the side of the console. Then, plug the other end into a jack on your MP3 player, CD player, or other personal audio player. Make sure that the audio wire is fully plugged in.
Next, press the play button on your MP3 player, CD player, or other personal audio player. Then, adjust the volume level on your personal audio player or press the Volume increase and decrease buttons on the console.
If you are using a personal CD player and the CD skips, set the CD player on the floor or another flat sur- face instead of on the console.
Note: The USB port on the side of the console is for firmware updates only.
HOW TO USE THE INTERNET BROWSER
Note: To use the browser, you must have access to a wireless network including an 802.11b/n router with SSID broadcast enabled (hidden networks are not sup- ported).
To open the browser, touch the globe button near the lower left corner of the screen. Then, select a website.
To return to the previous web page, press the back button on the console or touch the Browser Back but- ton on the screen. To exit the browser, press the home button on the console or touch the Return button on the screen.
To use the keyboard, see HOW TO USE THE TOUCH SCREEN on page 16.
To enter a different web address in the URL bar, first, slide your finger down the screen to view the URL bar, if necessary. Then, touch the URL bar, use the key- board to enter the address, and touch the Go button.
Note: While you are using the browser, the speed, in- cline, fan, and volume buttons will still function, but the workout buttons will not function.
Note: If you have questions after following these instructions, go to www.iFit.com/support for assistance.
26