Sears NTL19010.0 user manual HOW to SET UP the CONSOLE , Calibrate the incline system

Page 17

HOW TO SET UP THE CONSOLE 

Before using the incline trainer for the first time, set up the console.

1.Connect to your wireless network.

Note: In order to access the Internet, download iFit Live workouts, and use several other features of the console, you must be connected to a wire- less network. See HOW TO USE THE WIRELESS NETWORK MODE on page 25 to connect the con- sole to your wireless network.

2.Check for firmware updates.

First, see step 1 on page 23 and step 2 on page 24 and select the maintenance mode. Then, see step 3 on page 24 and check for firmware updates.

3.Calibrate the incline system.

See step 4 on page 24 and calibrate the incline system of the incline trainer.

4.Create an iFit Live account.

Touch the globe button near the lower-left corner of the screen and touch the iFit Live button.

Note: For information about navigating in the browser, see page 26. The browser will open to the iFit.com home page. Touch the Register button in the upper-right corner of the screen.

The browser will open to the iFit.com registration page. Touch an entry box to view the keyboard. Slide your finger up or down the screen to scroll up or down the page.

Next, enter a username and password and your e-mail address. Enter the activation code from the iFit Live flier that came with the incline trainer. Touch the Place of Purchase drop-down menu for a list of options; then, touch the location where you purchased your product. Touch the words MEDICAL DISCLAIMER, read the medical dis- claimer, touch the I Accept button, and check the medical disclaimer checkbox. Then, touch the Confirm Activation Code button.

Enter the requested personal information. When you have entered all of the information, touch the Finish button. Then, touch the Home button on the console to exit the browser.

The console is now ready for you to begin working out. The following pages explain the various workouts and other features that the console offers.

To use the manual mode, see page 18. To use an onboard workout, see page 20. To use a set-a-goal workout, see page 21. To use an iFit Live workout, see page 22.

To use the equipment settings mode, see page 23. To use the maintenance mode, see page 24. To use the wireless network mode, see page 25. To use the stereo sound system, see page 26. To use the Internet browser, see page 26.

IMPORTANT: If there are sheets of plastic on the console, remove the plastic. To prevent damage to the walking platform, wear clean athletic shoes while using the incline trainer. The first time you use the incline trainer, observe the alignment of the walking belt, and center the walking belt if nec- essary (see page 30).

17

Image 17
Contents Call TOLL-FREE QUESTIONS?Model No. NTL19010.0 Serial No Table of Contents Important Precautions Page BEFORE YOU BEGIN Part Identification Chart See the inset drawing. Tie the wire tie AssemblyMake sure that the power cord is unplugged Screws, and then tighten them. Be careful Tie Pulse Wire Console Assembly Wire Tie 101 102 103 Star Washers 8. Note Start the lower Screw First Right Upright 77. Make sure that no wires areConsole Base 87. Do not overtighten Screws Washers 8. Note Start the lower Screw first Upright 77. Make sure that no wires areAttach the Right Inside Cover and the Right Percent. Then, unplug the power cordScrews and then tighten them Care and Maintenance HOW to PUT on the Heart Rate MonitorTroubleshooting Chest Heart Rate MonitorHOW to Plug in the Power Cord Operation AND ADJUSTMENTConsole DiagramFeatures of the Console HOW to USE the Touch Screen HOW to Turn on the PowerConnect to your wireless network Check for firmware updates HOW to SET UP the CONSOLE Calibrate the incline system Create an iFit Live accountHOW to USE the Manual Mode Plug the power cord. Important If you do not When you are finished exercising, removeKey from the console Do this, the incline trainer’s electrical compoStart the workout HOW to USE AN Onboard WorkoutSelect an onboard workout Select the main menu. See on Select a set-a-goal workout HOW to USE a SET-A-GOAL WorkoutStart the workout. See on HOW to USE AN Ifit Live WorkoutHOW to USE the Equipment Settings Mode Exit the maintenance mode HOW to USE the Maintenance ModeCalibrate the incline system of the incline trainer Find KeycodesEnable Wi-Fi HOW to USE the Wireless Network ModeSet up and manage a wireless network connection Exit the wireless network modeHOW to USE the Internet Browser HOW to USE the Stereo Sound SystemHOW to Move the Incline Trainer Symptom The power turns off during use TroubleshootingSymptom The walking belt slows when walked on Page Exercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches Qty Description Part ListDescription Exploded Drawing a Exploded Drawing B 106 110 Exploded Drawing D Exploded Drawing E Icon Health & Fitness, Inc., 1500 S W., Logan, UT Ordering Replacement PartsLimited Warranty