NordicTrack NTL16920 Problem The walking belt slows when walked on, Power Cord, Move the key

Page 28

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8.

b. If the walking belt is overtightened, treadmill perfor-

 

mance may decrease and the walking belt may be-

 

come damaged. Remove the key and

UNPLUG THE

POWER CORD

. Using the allen wrench, turn both

rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, in- sert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

3”–4”

Rear Roller Adjustment Bolts

c. If the walking belt still slows when walked on, please call our Customer Service Department, toll- free.

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION:

a. If the walking belt is off-center, remove the key and

UN-

 

PLUG THE POWER CORD

. If the walking belt has

 

shifted to the left,

use the allen wrench to turn the left

 

rear roller bolt clockwise 1/2 of a turn;

if the walking belt

 

has shifted to the right,

turn the left rear roller bolt coun-

 

terclockwise 1/2 of a turn. Be careful not to overtighten the

 

walking belt. Plug in the power cord, insert the key, and

 

 

run the treadmill for a few minutes. Repeat until the walk-

 

ing belt is centered.

 

 

a

b. If the walking belt slips when walked on, first remove the

key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts clockwise, 1/4 of a turn.

When the walking belt is correctly tightened, you should

be able to lift each side of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key, and care- fully walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com

CD’s and videos are played

SOLUTION:

a. With the key in the console, press one of the Incline buttons.

While the incline is changing, re-

 

move the key.

After a few seconds, re-insert the key. The treadmill will automatically rise to the

 

maximum incline level and then return to the minimum level. This will recalibrate the incline.

 

28

Page 27 Page 29
Image 28
Page 27 Page 29
Contents QUESTIONS? Customer HOT LineTable of Contents Important Precautions Never insert or drop any object into any opening Using the treadmill Before YOU BeginLeft Side Right SideAssembly Assembly requires two peopleWire cutters Rubber mallet Extension Legs 102 remain in the UprightsSensor Make sure that the power cord is unplugged Do not Tighten the Bolts yetMill to protect the floor ShownHOW to Plug in the Power Cord Grounded before using an adapterPerformant Lube This product must be grounded.If it should malfuncFeatures of the Console Pulse sensor, seeThem in memory for future use Details Quire the use of the optional chest pulse sensorGetting Started HOW to USE the Manual Mode Distance/Laps Calories Fat caloriesMeasure your heart rate, if desired Moving your handsSelect the desired preset program HOW to USE Preset ProgramsStart the program 7When the program has ended, remove the key Next segmentFollow your progress with the displays Measure your heart rate if desiredSelect one of the custom programs HOW to Create Custom ProgramsPress the Start button or the Speed + button HOW to USE Custom Programs When the program has ended, remove the keyHOW to USE Heart Rate Programs Each heart rate program is divided into several time If your pulse is not detected during the programHOW to Connect Your Portable Stereo HOW to Connect Your Portable CD PlayerVideocassettes HOW to Connect Your Home Stereo HOW to Connect Your ComputerPlug the adapter into the Line OUT jack on your stereo Plug the adapter into an RCA Y-adapter availableHOW to Connect Your VCR AudioCable ProgramsWhen the CD or video program is completed, Next settings of the CD or video programWhenkey. the program is completed, remove HOW to USE Programs Directly from OUR WEB Site Next settings of the programGo to your computer and start an internet Connection Follow the on-line instructions to start ProgramInformation MODE/DEMO Mode HOW to Adjust the Cushioning SystemHOW to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Lower the Treadmill for USE Hold the treadmill firmly with both hands, and lowerTroubleshooting Problem The power turns off during useSolution Power cordProblem The walking belt slows when walked on Power CordIf the walking belt has Shifted to the leftConditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyQty Description Key No. Qty Ordering Replacement Parts Key No. Qty DescriptionWhat is COVERED-The entire NordicTrack Limited WarrantyPart No R1202A DRAWING-Model No. NTL16920 R1202AExploded DRAWING-Model No. NTL16920
Top Page Image Contents