A S S E M B LY STEP 3 - B (T72 model)
HARDWARE BAG 3 CONTENTS : | T72 |
BOLT (E) | ARC WASHER (D) |
10 mm | Qty: 2 |
Qty: 2 |
|
| angle view |
| BOLT (F) |
| 115 mm |
| Qty: 2 |
IMPORTANT PRECAUTIONS INTRODUCTION
ASSEMBLY
T72 |
CONSOLE |
HANDLEBAR |
EXTENSION |
BOLT (E) |
ARC WASHER (D) |
& BOLT (F) |
CONSOLE MAST |
| Please note that for STEP C, |
| the bracket should be on |
| the outside of the support |
BRACKET | bar as shown in the |
SUPPORT BAR | drawing to the left. |
AOpen HARDWARE BAG 3.
BSlide the Handlebar extension onto the console handlebar.
CInsert Bolts (E) into Handlebar EXTENSION and fully tighten.
DAlign the lower part of the Handlebar EXTENSION with the center of the console mast.
EInsert Bolts (F) and ARC WASHER
(D) through bottom holes of Handlebar EXTENSION into console mast and fully tighten.
FRepeat on other side.
BEFORE YOU BEGIN
TREADMILL OPERATION
TROUBLESHOOTING CONDITIONING & MAINTENANCE GUIDELINES
11
LIMITED WARRANTY