Horizon Fitness T71 T72 manual Position, place console, Upright masts, Seated into each other

A S S E M B LY STEP 2

INTRODUCTION

HARDWARE BAG 2 CONTENTS :

#0-5
# 
NN 2UZ


UPQ
WJFX

-0$,
8"4)&3
$ 2UZ


"3$
8"4)&3
% 2UZ


BOHMF
WJFX

A	Open HARDWARE BAG 2.
B	With running deck in lowered
	position, place console
	on upright masts. Slide the
	brackets that are underneath the
	console into the top holes of the
	upright masts.
C	Place Lock Washer (C) and
	bolt (B) into flat side of left

IMPORTANT PRECAUTIONS

	CONSOLE CABLE
	ARC WASHER (D)
	LOCK WASHER (C)
	DO NOT ATTACH
	THIS SIDE UNTIL STEP 2-F
ARC WASHER (D)	BOLT (B) 4 TOTAL

* Be sure to tighten bolts after all are lined up.

"44&.#-&%
*/
45&1
%

	upright mast and lightly tighten.
D	Place Arc Washer (D) and bolt
	(B) into curved side of left
	upright mast and lightly tighten.
E	Gently lift right side of the
	console to connect the console
	cable. Carefully tuck wires in
	mast to avoid damage. Note: Do
	not pinch console cable. Be sure
	the console cable prongs are
	aligned and the ends are tightly
	seated into each other.
F	Repeat steps C-D above to
	assemble the right side upright
	mast and console.
G	Tighten all bolts completely.

ASSEMBLY

BEFORE YOU BEGIN

TREADMILL OPERATION

TROUBLESHOOTING CONDITIONING MAINTENANCE GUIDELINES

*Note: Be careful not to pinch any wires while assembling the masts.

&



LIMITED WARRANTY