JVC UX-F72MD Adjusting the Volume, Turning On/Off the Key-touch Tone, Reinforcing the Bass Sound

Page 17

Continued

English

Adjusting the Volume

You can adjust the volume level only while the unit is turned on. The volume level has no effect on recording.

To increase the volume, press VOLUME + . To decrease the volume, press VOLUME – .

(Maximum)

(Minimum)

The volume level meter appears on the display.

•The volume level can be adjusted in 41 steps (VOL MIN, VOL 1 – VOL 39, and VOL MAX.)

•When pressing and holding the button, you can change the volume level continuously.

For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers. Be sure to turn down the volume before connecting or putting on the headphones.

If “CANNOT LISTEN!” appears on the display

During high-speed recording (see page 31), you cannot listen to any source, and therefore, cannot adjust the volume level.

DO NOT turn off (on standby) the unit with the volume set to an extremely high level; otherwise, the sudden blast of sound can damage your hearing, speakers and/or headphones when you turn on the unit or start playing any source.

REMEMBER you cannot adjust the volume level while the unit is in standby mode.

Turning On/Off the Key-touch Tone

You can deactivate the key-touch tone if you do not want it to beep each time you press the button.

On the remote control ONLY:

Press BEEP.

•Each time you press the button, the key-touch tone turns on (BEEP ON) and off (BEEP OFF) alternately:

BEEP ON BEEP OFF

Reinforcing the Bass Sound

The richness and fullness of the bass sound is clearly maintained regardless of how low you set the volume — Active Hyper Bass Pro. The AHB PRO effect can be applied only to playback sounds, and cannot be used for recording.

On the remote control ONLY:

To get the effect, press AHB PRO.

The AHB PRO indicator lights on the display.

•Each time you press the button, the effect changes as follows:

AHB 1 AHB 2

AHB OFF

(Canceled)

AHB 1: Bass sound is clearly heard even in the low volume.

AHB 2: More richness and fullness of the bass sound is heard.

AHB OFF: Cancels the AHB PRO effect.

The AHB PRO indicator goes off from the display.

To check the AHB PRO setting currently selected, press AHB PRO once while the AHB PRO indicator is lit.

Selecting the Sound Modes

You can select one of the 4 preset sound modes. The sound modes can be applied only to playback sounds, and cannot be used for recording.

On the remote control ONLY:

To select the sound modes, press SOUND MODE repeatedly until the sound mode you want appears on the display.

The SOUND indicator also lights on the display.

•Each time you press the button, the sound mode changes as follows:

ROCK POP CLASSIC

FLAT JAZZ

(Canceled)

ROCK: Boosts low and high frequency. Good for acoustic music.

POP: Good for vocal music or voice.

CLASSIC: Good for classical music.

JAZZ: Good for jazz music.

FLAT: Cancels the sound mode.

The SOUND indicator goes off from the display.

To check the sound mode currently selected, press SOUND MODE once while the SOUND indicator is lit.

– 12 –

Page 16 Page 18
Image 17
Page 16 Page 18
Contents UX-F70MD UX-F72MD Page English Front view Class Laser Product Introduction PrecautionsContents Main unit Location of the ButtonsTop view Front viewDisplay window Main UnitRemote Control Unpacking Getting StartedTo connect an outdoor FM antenna FM antennaAM antenna Connecting SpeakersTo connect an outdoor AM antenna To attach spacersTo connect speakers Connecting Other EquipmentTo connect another component such as analog audio equipment For playing the other equipment through this unitTo start the display illumination manually, press Putting the Batteries into the Remote ControlTo stop and cancel the display demonstration, press Basic and Common Operations Remote controlMain unit Top view Main unit Front viewSelecting the Sources and Starting Play Turning On the PowerTurning On/Off the Key-touch Tone Adjusting the VolumeReinforcing the Bass Sound Selecting the Sound ModesTo adjust and register the color Setting the Display IlluminationTo select the color pattern To set TODAY’S ColorListening to FM and AM Broadcasts Tuning in a Station Setting the AM Tuner Interval SpacingPresetting Stations To change the FM reception modePress the number buttons to select a preset number Tuning in a Preset StationOn the remote control only Press DISPLAY/CHARA Press SET againMark Playing Back a CDPlaying Back the Entire CD Normal Play Precautions on CD PlaybackProgram Play Basic CD OperationsTo modify the program To check the program contentsPlaying at Random Random Play Repeat ALL Repeat ONE Repeating Tracks Repeat PlayMark Playing Back an MDPress MD open/close 0on the main unit About recording length mode Mdlp seeInsert an MD into the MD loading slot Press MD 3To change the informations on the display Basic MD OperationsPrograming the Playing Order of the Tracks Program Play Press 4or ¢while pressing MD Group to select a group Playing Tracks in a Group Group PlayTo erase the entire program, press MD open/close 0to Searching by Title of the Track MD Title Search Playing Back a Tape Playing Back a Tape To play both sides Reverse ModeRecording on MDs About the track marks Before You Start Recording on an MDTo avoid erasing important recordings To put a track mark manually while recording anStereo Long-Hour Recording Mdlp Precautions for performing long-hour stereo recordingAbout High-Speed Recording To check the remaining recording timeBefore recording on an MD Recording FM/AM BroadcastsRecording CD CD Synchronized Recording To record a single track during play or pause Recording Tape Tape SynchronizedTo check the remaining time while recording CD onto an MD To check the remaining time while recording tape onto an MDStart playback on the external equipment Recording Recording Speed ModePress AUX Recording on Tapes Before You Start Recording on a Tape To clean the heads, capstans, and pinch rollersTo protect your recordings To keep the best recording and playback sound qualityMode 8/15 Recording Reverse modeMode 4/5 Mode 5/5 Recording MD MD Synchronized Recording Mode 1/2 Mode 2/2Recording the External Equipment To check the clock time while recording MD onto a tapeSpeed Recording CD onto an MD and a Tape CD Synchronized RecordingAbout MD Group Editing MD GroupsHow to Make Up Groups Using MD Group FunctionsGuidance MD Group Functions Classifying the tracks on an MDIntroducing MD Group Editing Forming a Group Form GR Press Enter to finish the editing procedureDuring playback Press ¢or 4to select the last track of a new groupDividing a Group Divide GR Adding a Track to a Group Entry GRPress SET During playback Press ¢or 4to select a track you want to add to a groupTo divide the joined group, see the Divide GR function on Joining Two Groups Join GRTo join the divided groups, see the Join GR function to Press Enter to finish the editing procedure On the remote control only Press SETMoving a Group Move GR Ungrouping Tracks UngroupErasing Tracks in a Group Erase GR Dissolving All Groups Ungr ALLEditing MD Tracks Introducing MD Track Editing Dividing a Track Divide Press = or +to adjust the dividing point preciselyJoining Two Tracks Join Press ¢or 4to select a track you want to divideMoving a Track Move When the tracks belongs to a groupTo divide the joined tracks, see the Divide function on Press ¢or 4to select a track you want to moveErasing All Tracks ALL Erase Erasing Tracks EraseSelect a track you want to erase Press ¢or Press SET Repeat to select all the tracks you want to eraseAssigning Titles to an MD Assigning the Disc Title, Track Title and Group Title Press SET to enter the selected title entry modeInsert an MD to edit Press MD Title INPUT/EDIT About the number of characters inputted for an MDChanging the Title Using the Timers How Recording Timer actually works Setting the ClockUsing Recording Timer How Daily Timer actually works Using Daily TimerDaily Timer does not work at all If the unit is kept turned on when the timer-on time comesHow Sleep Timer actually works Using Sleep TimerTimer Priority Maintenance Additional Information Utoc User Table Of ContentsMD Disc Types Atrac Adaptive TRansform Acoustic Coding/ATRAC3Hcms High-speed Copy Management System Scms Serial Copy Management SystemMD/CD Messages Track Protected X4 Speed Cannot Copy LOW Temp TroubleshootingSpecifications EN, CH
Top Page Image Contents