JVC UX-F72MD, UX-F70MD manual Specifications

Page 71

Specifications

Amplifier

Output Power (IEC 268-3/DIN):

32 W (16 W + 16 W) at 4 Ω (MAX.)

30 W (15 W + 15 W) at 4 Ω (10 % THD)

Audio input sensitivity/Impedance (at 1 kHz)

LINE IN (AUX):	500 mV/47 kΩ
Speaker Terminals:	4 Ω — 16 Ω

Speaker Section

Speakers:	Woofer 10 cm, Tweeter 4 cm
Impedance:	4 Ω

Dimensions (approx.):

140 mm x 200 mm x 249 mm (W/H/D) (51/2 in. x 77/8 in. x 97/8 in.)

Mass (approx.):2.0 kg (4.5 lbs)

English

Tuner

FM tuning range:

87.50 MHz — 108.00 MHz

AM tuning range:

531 kHz — 1 710 kHz (at 9 kHz channel spacing) 530 kHz — 1 710 kHz (at 10 kHz channel spacing)

CD player

CD Capacity:	1 CD
Dynamic range:	85 dB
Signal-to-noise ratio:	90 dB
Wow and flutter:	Immeasurable

MD recorder

Audio playing system: MiniDisc digital audio system

Recording system:	Magneto-optical overwrite system
Reading system:	Non-contact, semiconductor laser
	pickup (λ=780 nm)
Error correction system:	CIRC (Cross Interleave Reed-
	Solomon Code)

Recording/Playback time (when using a 80-minute MD):

SP	:	80 minutes
LP2	:	160 minutes
LP4	:	320 minutes

Sampling frequency: 44.1 kHz

Audio compression system:

ATRAC (Adaptive TRansform Acoustic Coding)/ATRAC3

( )

Cassette deck

Frequency response

Normal (type I):60 Hz — 14 000 Hz

Wow and flutter

0.15 % (WRMS)

General

Power requirement: AC 230V 50 Hz

Power consumption: 51 W (at operation) 1.2 W (on standby)

Dimensions (approx.):

455 mm x 203 mm x 330 mm (W/H/D)

(18 in. x 8 in. x 13 in.)

Mass (approx.): 9 kg (19.9 lbs)

Supplied accessories

See page 6.

US and foreign patents licensed from Dolby Laboratories Licensing Corporation.

Design and specifications are subject to change without notice.

– 66 –

Image 71

Contents UX-F70MD UX-F72MD Page English Front view Class Laser Product Introduction PrecautionsContents Front view Location of the ButtonsMain unit Top viewDisplay window Main UnitRemote Control FM antenna Getting StartedUnpacking To connect an outdoor FM antennaTo attach spacers Connecting SpeakersAM antenna To connect an outdoor AM antennaFor playing the other equipment through this unit Connecting Other EquipmentTo connect speakers To connect another component such as analog audio equipmentTo start the display illumination manually, press Putting the Batteries into the Remote ControlTo stop and cancel the display demonstration, press Main unit Front view Remote controlBasic and Common Operations Main unit Top viewSelecting the Sources and Starting Play Turning On the PowerSelecting the Sound Modes Adjusting the VolumeTurning On/Off the Key-touch Tone Reinforcing the Bass SoundTo set TODAY’S Color Setting the Display IlluminationTo adjust and register the color To select the color patternListening to FM and AM Broadcasts To change the FM reception mode Setting the AM Tuner Interval SpacingTuning in a Station Presetting StationsPress SET again Tuning in a Preset StationPress the number buttons to select a preset number On the remote control only Press DISPLAY/CHARAMark Playing Back a CDPlaying Back the Entire CD Normal Play Precautions on CD PlaybackProgram Play Basic CD OperationsTo modify the program To check the program contentsPlaying at Random Random Play Repeat ALL Repeat ONE Repeating Tracks Repeat PlayMark Playing Back an MDPress MD 3 About recording length mode Mdlp seePress MD open/close 0on the main unit Insert an MD into the MD loading slotTo change the informations on the display Basic MD OperationsPrograming the Playing Order of the Tracks Program Play Press 4or ¢while pressing MD Group to select a group Playing Tracks in a Group Group PlayTo erase the entire program, press MD open/close 0to Searching by Title of the Track MD Title Search Playing Back a Tape Playing Back a Tape To play both sides Reverse ModeRecording on MDs To put a track mark manually while recording an Before You Start Recording on an MDAbout the track marks To avoid erasing important recordingsTo check the remaining recording time Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp About High-Speed RecordingBefore recording on an MD Recording FM/AM BroadcastsRecording CD CD Synchronized Recording To check the remaining time while recording tape onto an MD Recording Tape Tape SynchronizedTo record a single track during play or pause To check the remaining time while recording CD onto an MDStart playback on the external equipment Recording Recording Speed ModePress AUX Recording on Tapes To keep the best recording and playback sound quality To clean the heads, capstans, and pinch rollersBefore You Start Recording on a Tape To protect your recordingsMode 8/15 Recording Reverse modeMode 4/5 Mode 5/5 To check the clock time while recording MD onto a tape Mode 1/2 Mode 2/2Recording MD MD Synchronized Recording Recording the External EquipmentSpeed Recording CD onto an MD and a Tape CD Synchronized RecordingAbout MD Group Editing MD GroupsClassifying the tracks on an MD Using MD Group FunctionsHow to Make Up Groups Guidance MD Group FunctionsIntroducing MD Group Editing Press ¢or 4to select the last track of a new group Press Enter to finish the editing procedureForming a Group Form GR During playbackPress ¢or 4to select a track you want to add to a group Adding a Track to a Group Entry GRDividing a Group Divide GR Press SET During playbackTo divide the joined group, see the Divide GR function on Joining Two Groups Join GRTo join the divided groups, see the Join GR function to Ungrouping Tracks Ungroup On the remote control only Press SETPress Enter to finish the editing procedure Moving a Group Move GRErasing Tracks in a Group Erase GR Dissolving All Groups Ungr ALLEditing MD Tracks Introducing MD Track Editing Press ¢or 4to select a track you want to divide Press = or +to adjust the dividing point preciselyDividing a Track Divide Joining Two Tracks JoinPress ¢or 4to select a track you want to move When the tracks belongs to a groupMoving a Track Move To divide the joined tracks, see the Divide function onPress SET Repeat to select all the tracks you want to erase Erasing Tracks EraseErasing All Tracks ALL Erase Select a track you want to erase Press ¢orAssigning Titles to an MD About the number of characters inputted for an MD Press SET to enter the selected title entry modeAssigning the Disc Title, Track Title and Group Title Insert an MD to edit Press MD Title INPUT/EDITChanging the Title Using the Timers How Recording Timer actually works Setting the ClockUsing Recording Timer How Daily Timer actually works Using Daily TimerDaily Timer does not work at all If the unit is kept turned on when the timer-on time comesHow Sleep Timer actually works Using Sleep TimerTimer Priority Maintenance Atrac Adaptive TRansform Acoustic Coding/ATRAC3 Utoc User Table Of ContentsAdditional Information MD Disc TypesHcms High-speed Copy Management System Scms Serial Copy Management SystemMD/CD Messages Track Protected X4 Speed Cannot Copy LOW Temp TroubleshootingSpecifications EN, CH