JVC UX-F70MD, UX-F72MD manual Troubleshooting, Track Protected X4 Speed Cannot Copy LOW Temp

Page 70

English

Message

 

Signification

SCMS CANNOT

 

Digital copy of the 2nd generation is

COPY

 

prohibited.

Solution

Use the external equipment connected to the LINE IN jacks (as the recording/ playback device.)

TRACK

PROTECTED

X4 SPEED

CANNOT COPY

LOW TEMP

The track has been protected.

 

This unit can not unprotect it.

 

 

To unprotect it, use the equipment with

 

 

which it was protected.

 

 

 

The room temperature is too low to

 

This is not a malfunction. You can

record using x4 speed-recording.

 

record using x4 speed-recording within

 

 

5˚C – 35˚C.

 

 

 

CANNOT PLAY

CD LOAD ERROR

UNFINALIZE

You are trying to play back a CD which cannot be played or there is a problem with the CD.

The CD tray does not open correctly because of the obstruction.

You are trying to play back a CD-R/ RW which has not been ‘finalized’ yet.

Change the CD.

Press CD open/close 0to close the CD tray, then remove the obstruction.

This is not a malfunction. You can play back the ‘finalized’ CD-R/RW.

Troubleshooting

If you are having a problem with your unit, check this list for a possible solution before calling for service.

If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service.

Symptom

No sound is heard.

Unable to operate the remote control.

Unable to record on an MD.

Poor radio reception.

Loaded CD and MD can not be ejected.

The CD does not play.

The disc skips.

The cassette holder does not open or close.

Impossible to record on a tape.

Operations are disabled.

Possible Cause

 

Action

Connections are incorrect or loose.

 

Check all connections and make

 

 

corrections. (See pages 6 – 9.)

•The path between the remote control and the • Remove the obstruction. remote sensor on the unit is blocked.

• The batteries have lost their charge.

 

• Replace the batteries. (See page 9.)

• You are using the remote control far from

 

• Signals cannot reach the remote

the unit.

 

sensor. Move close to the unit.

 

 

 

 

• You are using a prerecorded MD.

 

• Use a recordable MD.

 

• The MD is write-protected.

 

• Unprotect the MD. (See page 30.)

 

 

 

 

• The antenna is not connected correctly.

 

• Reconnect the antenna securely.

 

• The AM loop antenna is too close to the

 

• Change the position and direction

unit.

 

of the AM loop antenna.

• The FM antenna is not properly extended

 

• Extend FM antenna to the best

and positioned.

 

reception position.

 

 

 

 

The main AC power cord is not plugged in.

 

Plug it in the AC power plug.

 

 

 

 

 

The CD is upside down.

 

Put the CD in with the label side up.

 

 

 

 

 

The disc is dirty or scratched.

 

Clean or replace the disc. (See page 61.)

 

 

 

 

 

Power supply from the AC power cord has

 

Turn on the unit.

 

been cut off while the tape was running.

 

 

 

 

 

 

 

Small tabs on the back of the cassette are

 

Cover the holes with adhesive tape.

 

removed.

 

 

 

 

 

 

 

The built-in microprocessor has malfunctioned

 

Unplug the unit then plug it back in.

 

due to external electrical interference.

 

 

 

 

 

 

 

– 65 –

Page 69 Page 71
Image 70
Page 69 Page 71
Contents UX-F70MD UX-F72MD Page English Front view Class Laser Product Precautions IntroductionContents Top view Location of the ButtonsMain unit Front viewMain Unit Display windowRemote Control To connect an outdoor FM antenna Getting StartedUnpacking FM antennaTo connect an outdoor AM antenna Connecting SpeakersAM antenna To attach spacersTo connect another component such as analog audio equipment Connecting Other EquipmentTo connect speakers For playing the other equipment through this unitTo stop and cancel the display demonstration, press Putting the Batteries into the Remote ControlTo start the display illumination manually, press Main unit Top view Remote controlBasic and Common Operations Main unit Front viewTurning On the Power Selecting the Sources and Starting PlayReinforcing the Bass Sound Adjusting the VolumeTurning On/Off the Key-touch Tone Selecting the Sound ModesTo select the color pattern Setting the Display IlluminationTo adjust and register the color To set TODAY’S ColorListening to FM and AM Broadcasts Presetting Stations Setting the AM Tuner Interval SpacingTuning in a Station To change the FM reception modeOn the remote control only Press DISPLAY/CHARA Tuning in a Preset StationPress the number buttons to select a preset number Press SET againPlaying Back a CD MarkPrecautions on CD Playback Playing Back the Entire CD Normal PlayBasic CD Operations Program PlayPlaying at Random Random Play To check the program contentsTo modify the program Repeating Tracks Repeat Play Repeat ALL Repeat ONEPlaying Back an MD MarkInsert an MD into the MD loading slot About recording length mode Mdlp seePress MD open/close 0on the main unit Press MD 3Programing the Playing Order of the Tracks Program Play Basic MD OperationsTo change the informations on the display To erase the entire program, press MD open/close 0to Playing Tracks in a Group Group PlayPress 4or ¢while pressing MD Group to select a group Searching by Title of the Track MD Title Search Playing Back a Tape To play both sides Reverse Mode Playing Back a TapeRecording on MDs To avoid erasing important recordings Before You Start Recording on an MDAbout the track marks To put a track mark manually while recording anAbout High-Speed Recording Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp To check the remaining recording timeRecording CD CD Synchronized Recording Recording FM/AM BroadcastsBefore recording on an MD To check the remaining time while recording CD onto an MD Recording Tape Tape SynchronizedTo record a single track during play or pause To check the remaining time while recording tape onto an MDPress AUX Recording Recording Speed ModeStart playback on the external equipment Recording on Tapes To protect your recordings To clean the heads, capstans, and pinch rollersBefore You Start Recording on a Tape To keep the best recording and playback sound qualityMode 4/5 Mode 5/5 Recording Reverse modeMode 8/15 Recording the External Equipment Mode 1/2 Mode 2/2Recording MD MD Synchronized Recording To check the clock time while recording MD onto a tapeRecording CD onto an MD and a Tape CD Synchronized Recording SpeedEditing MD Groups About MD GroupGuidance MD Group Functions Using MD Group FunctionsHow to Make Up Groups Classifying the tracks on an MDIntroducing MD Group Editing During playback Press Enter to finish the editing procedureForming a Group Form GR Press ¢or 4to select the last track of a new groupPress SET During playback Adding a Track to a Group Entry GRDividing a Group Divide GR Press ¢or 4to select a track you want to add to a groupTo join the divided groups, see the Join GR function to Joining Two Groups Join GRTo divide the joined group, see the Divide GR function on Moving a Group Move GR On the remote control only Press SETPress Enter to finish the editing procedure Ungrouping Tracks UngroupDissolving All Groups Ungr ALL Erasing Tracks in a Group Erase GREditing MD Tracks Introducing MD Track Editing Joining Two Tracks Join Press = or +to adjust the dividing point preciselyDividing a Track Divide Press ¢or 4to select a track you want to divideTo divide the joined tracks, see the Divide function on When the tracks belongs to a groupMoving a Track Move Press ¢or 4to select a track you want to moveSelect a track you want to erase Press ¢or Erasing Tracks EraseErasing All Tracks ALL Erase Press SET Repeat to select all the tracks you want to eraseAssigning Titles to an MD Insert an MD to edit Press MD Title INPUT/EDIT Press SET to enter the selected title entry modeAssigning the Disc Title, Track Title and Group Title About the number of characters inputted for an MDChanging the Title Using the Timers Using Recording Timer Setting the ClockHow Recording Timer actually works Using Daily Timer How Daily Timer actually worksIf the unit is kept turned on when the timer-on time comes Daily Timer does not work at allTimer Priority Using Sleep TimerHow Sleep Timer actually works Maintenance MD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic Coding/ATRAC3Scms Serial Copy Management System Hcms High-speed Copy Management SystemMD/CD Messages Troubleshooting Track Protected X4 Speed Cannot Copy LOW TempSpecifications EN, CH
Top Page Image Contents