JVC UX-F70MD, UX-F72MD manual Maintenance

Page 66

English

Maintenance

To get the best performance of the unit, keep your discs, tapes, and mechanism clean.

General Notes

In general, you will have the best performance by keeping your discs and the mechanism clean.

•Store discs in their cases, and keep them in cabinets or on shelves.

•Keep the electronic swing panel closed when not in use.

Cleaning the unit

•Stains on the unit

Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in water-diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

•Avoid the following since they may cause damage to the unit.

-DO NOT wipe it with a hard cloth.

-DO NOT wipe it strong.

-DO NOT wipe it with thinner or benzine.

-DO NOT apply any volatile substance such as insecticides to it.

-DO NOT allow any rubber or plastic to remain in contact with it for a long time.

Handling discs

• Remove the disc from its case by holding it at the edge while pressing the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the disc.

•Put the disc back in its case after use to prevent warping.

•Be careful not to scratch the surface

of the disc when placing it back in its case.

• Avoid exposure to direct sunlight, temperature extremes and moisture.

To clean the disc

Wipe the disc with a soft cloth in a straight line from center to edge.

Handling MDs

• Do not open the shutter.

- The shutter is locked so that it will not open. Trying to force it open will break the MD. If the shutter opens accidentally, close it again quickly without touching the MD inside.

•Do not place MDs in the following places:

- High temperature areas such as in direct sunlight or inside a car.

-High humidity areas such as in a bathroom.

-On a beach or sandy area.

•Clean MDs regularly.

-If dust or dirt gets on cartridge, wipe it off with a soft dry cloth.

Handling cassette tapes

• If the tape is loose in its cassette, take up the slack by inserting a pencil in one of the reels and rotating.

• If the tape is loose, it may get stretched, cut, or caught in the cassette.

• Be careful not to touch the tape surface.

• Avoid the following places to store the tape:

- In dusty places

- In direct sunlight or heat

-In moist areas

-On a TV or speaker

-Near a magnet

DO NOT use any solvent — such as conventional record cleaner, spray, thinner, or benzine — to clean

the disc.

– 61 –

Page 65 Page 67
Image 66
Page 65 Page 67
Contents UX-F70MD UX-F72MD Page English Front view Class Laser Product Precautions IntroductionContents Top view Location of the ButtonsMain unit Front viewMain Unit Display windowRemote Control To connect an outdoor FM antenna Getting StartedUnpacking FM antennaTo connect an outdoor AM antenna Connecting SpeakersAM antenna To attach spacersTo connect another component such as analog audio equipment Connecting Other EquipmentTo connect speakers For playing the other equipment through this unitPutting the Batteries into the Remote Control To stop and cancel the display demonstration, pressTo start the display illumination manually, press Main unit Top view Remote controlBasic and Common Operations Main unit Front viewTurning On the Power Selecting the Sources and Starting PlayReinforcing the Bass Sound Adjusting the VolumeTurning On/Off the Key-touch Tone Selecting the Sound ModesTo select the color pattern Setting the Display IlluminationTo adjust and register the color To set TODAY’S ColorListening to FM and AM Broadcasts Presetting Stations Setting the AM Tuner Interval SpacingTuning in a Station To change the FM reception modeOn the remote control only Press DISPLAY/CHARA Tuning in a Preset StationPress the number buttons to select a preset number Press SET againPlaying Back a CD MarkPrecautions on CD Playback Playing Back the Entire CD Normal PlayBasic CD Operations Program PlayTo check the program contents Playing at Random Random PlayTo modify the program Repeating Tracks Repeat Play Repeat ALL Repeat ONEPlaying Back an MD MarkInsert an MD into the MD loading slot About recording length mode Mdlp seePress MD open/close 0on the main unit Press MD 3Basic MD Operations Programing the Playing Order of the Tracks Program PlayTo change the informations on the display Playing Tracks in a Group Group Play To erase the entire program, press MD open/close 0toPress 4or ¢while pressing MD Group to select a group Searching by Title of the Track MD Title Search Playing Back a Tape To play both sides Reverse Mode Playing Back a TapeRecording on MDs To avoid erasing important recordings Before You Start Recording on an MDAbout the track marks To put a track mark manually while recording anAbout High-Speed Recording Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp To check the remaining recording timeRecording FM/AM Broadcasts Recording CD CD Synchronized RecordingBefore recording on an MD To check the remaining time while recording CD onto an MD Recording Tape Tape SynchronizedTo record a single track during play or pause To check the remaining time while recording tape onto an MDRecording Recording Speed Mode Press AUXStart playback on the external equipment Recording on Tapes To protect your recordings To clean the heads, capstans, and pinch rollersBefore You Start Recording on a Tape To keep the best recording and playback sound qualityRecording Reverse mode Mode 4/5 Mode 5/5Mode 8/15 Recording the External Equipment Mode 1/2 Mode 2/2Recording MD MD Synchronized Recording To check the clock time while recording MD onto a tapeRecording CD onto an MD and a Tape CD Synchronized Recording SpeedEditing MD Groups About MD GroupGuidance MD Group Functions Using MD Group FunctionsHow to Make Up Groups Classifying the tracks on an MDIntroducing MD Group Editing During playback Press Enter to finish the editing procedureForming a Group Form GR Press ¢or 4to select the last track of a new groupPress SET During playback Adding a Track to a Group Entry GRDividing a Group Divide GR Press ¢or 4to select a track you want to add to a groupJoining Two Groups Join GR To join the divided groups, see the Join GR function toTo divide the joined group, see the Divide GR function on Moving a Group Move GR On the remote control only Press SETPress Enter to finish the editing procedure Ungrouping Tracks UngroupDissolving All Groups Ungr ALL Erasing Tracks in a Group Erase GREditing MD Tracks Introducing MD Track Editing Joining Two Tracks Join Press = or +to adjust the dividing point preciselyDividing a Track Divide Press ¢or 4to select a track you want to divideTo divide the joined tracks, see the Divide function on When the tracks belongs to a groupMoving a Track Move Press ¢or 4to select a track you want to moveSelect a track you want to erase Press ¢or Erasing Tracks EraseErasing All Tracks ALL Erase Press SET Repeat to select all the tracks you want to eraseAssigning Titles to an MD Insert an MD to edit Press MD Title INPUT/EDIT Press SET to enter the selected title entry modeAssigning the Disc Title, Track Title and Group Title About the number of characters inputted for an MDChanging the Title Using the Timers Setting the Clock Using Recording TimerHow Recording Timer actually works Using Daily Timer How Daily Timer actually worksIf the unit is kept turned on when the timer-on time comes Daily Timer does not work at allUsing Sleep Timer Timer PriorityHow Sleep Timer actually works Maintenance MD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic Coding/ATRAC3Scms Serial Copy Management System Hcms High-speed Copy Management SystemMD/CD Messages Troubleshooting Track Protected X4 Speed Cannot Copy LOW TempSpecifications EN, CH
Top Page Image Contents