JVC UX-F70MD Setting the Display Illumination, To select the color pattern, To set TODAY’S Color

Page 18

English

Setting the Display Illumination

You can change the color and brightness of the display illumination.

To select the color pattern

You can select the color pattern by your preference.

•If you press COLOR while the unit is turned off, the display illumination will start (see page 9.)

While the unit is turned on, press COLOR repeatedly until the color pattern you want appears on the display.

•Each time you press the button, the color pattern changes as follows:

COLORCOLOR

RANDOM GRADATION

COLOR 1

TODAY’S

*

COLOR #

– COLOR 7

DAILY

 

 

 

COLOR RANDOM: Changes the illumination color randomly every 2 seconds.

COLOR GRADATION:

Changes the illumination color gradually.

TODAY’S COLOR # * DAILY:

Changes the illumination color every day. You can select which color to be started with. (See “To set TODAY’S COLOR” to the right.)

*The color number of TODAY’S COLOR is selected from COLOR 1 – 7.

COLOR 1 – 7: You can adjust and register the color from COLOR 1 to 7. (See “To adjust and register the color” to the right.)

More on the display illumination

•The colors shown on the display cannot always be reproduced precisely. Due to the circumstances (room temperature, etc.) where the unit is used, colors may vary slightly.

•When you change the color of the display, the display may seem to move back and forth; this is a characteristic of this unit and is not a malfunction.

•When a strong light strikes the display, the display happens to become dark, but this is not a malfunction.

To adjust and register the color

You can adjust the color by changing the tone, whiteness, brigtness, and register into COLOR 1 to 7.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the remote control ONLY:

1 Press COLOR repeatedly until the color number (COLOR 1 to 7) you want to adjust appears on the display.

The adjustment bars appear on the display.

2 Adjust the tone, whiteness and brightness.

1)Press =or +to select the level you want and press SET.

Each time you press SET, the adjustment items change.

The tone can be adjusted in 14 patterns. The whiteness can be adjusted in 3 levels and the brightness can be adjusted in 2 levels.

2)Repeat step 1 to adjust “WHITENESS” and “BRIGHTNESS.”

•If the whiteness is set to the right end, the tone you adjusted will be no longer valid.

To set “TODAY’S COLOR”

The illumination color changes automatically each time the built-in clock becomes “0:00.”

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the remote control ONLY:

1 Press COLOR repeatedly until “TODAY’S COLOR” appears on the display.

2 Press =and +to select the color number (COLOR 1 to 7.)

To dim the display

This function can be used only while the unit is turned on.

On the remote control ONLY:

To dim the display, press DIMMER.

To brighten the display, press DIMMER again.

• Press COLOR also brightens the display.

– 13 –

Page 17 Page 19
Image 18
Page 17 Page 19
Contents UX-F70MD UX-F72MD Page English Front view Class Laser Product Precautions IntroductionContents Top view Location of the ButtonsMain unit Front viewMain Unit Display windowRemote Control To connect an outdoor FM antenna Getting StartedUnpacking FM antennaTo connect an outdoor AM antenna Connecting SpeakersAM antenna To attach spacersTo connect another component such as analog audio equipment Connecting Other EquipmentTo connect speakers For playing the other equipment through this unitPutting the Batteries into the Remote Control To stop and cancel the display demonstration, pressTo start the display illumination manually, press Main unit Top view Remote controlBasic and Common Operations Main unit Front viewTurning On the Power Selecting the Sources and Starting PlayReinforcing the Bass Sound Adjusting the VolumeTurning On/Off the Key-touch Tone Selecting the Sound ModesTo select the color pattern Setting the Display IlluminationTo adjust and register the color To set TODAY’S ColorListening to FM and AM Broadcasts Presetting Stations Setting the AM Tuner Interval SpacingTuning in a Station To change the FM reception modeOn the remote control only Press DISPLAY/CHARA Tuning in a Preset StationPress the number buttons to select a preset number Press SET againPlaying Back a CD MarkPrecautions on CD Playback Playing Back the Entire CD Normal PlayBasic CD Operations Program PlayTo check the program contents Playing at Random Random PlayTo modify the program Repeating Tracks Repeat Play Repeat ALL Repeat ONEPlaying Back an MD MarkInsert an MD into the MD loading slot About recording length mode Mdlp seePress MD open/close 0on the main unit Press MD 3Basic MD Operations Programing the Playing Order of the Tracks Program PlayTo change the informations on the display Playing Tracks in a Group Group Play To erase the entire program, press MD open/close 0toPress 4or ¢while pressing MD Group to select a group Searching by Title of the Track MD Title Search Playing Back a Tape To play both sides Reverse Mode Playing Back a TapeRecording on MDs To avoid erasing important recordings Before You Start Recording on an MDAbout the track marks To put a track mark manually while recording anAbout High-Speed Recording Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp To check the remaining recording timeRecording FM/AM Broadcasts Recording CD CD Synchronized RecordingBefore recording on an MD To check the remaining time while recording CD onto an MD Recording Tape Tape SynchronizedTo record a single track during play or pause To check the remaining time while recording tape onto an MDRecording Recording Speed Mode Press AUXStart playback on the external equipment Recording on Tapes To protect your recordings To clean the heads, capstans, and pinch rollersBefore You Start Recording on a Tape To keep the best recording and playback sound qualityRecording Reverse mode Mode 4/5 Mode 5/5Mode 8/15 Recording the External Equipment Mode 1/2 Mode 2/2Recording MD MD Synchronized Recording To check the clock time while recording MD onto a tapeRecording CD onto an MD and a Tape CD Synchronized Recording SpeedEditing MD Groups About MD GroupGuidance MD Group Functions Using MD Group FunctionsHow to Make Up Groups Classifying the tracks on an MDIntroducing MD Group Editing During playback Press Enter to finish the editing procedureForming a Group Form GR Press ¢or 4to select the last track of a new groupPress SET During playback Adding a Track to a Group Entry GRDividing a Group Divide GR Press ¢or 4to select a track you want to add to a groupJoining Two Groups Join GR To join the divided groups, see the Join GR function toTo divide the joined group, see the Divide GR function on Moving a Group Move GR On the remote control only Press SETPress Enter to finish the editing procedure Ungrouping Tracks UngroupDissolving All Groups Ungr ALL Erasing Tracks in a Group Erase GREditing MD Tracks Introducing MD Track Editing Joining Two Tracks Join Press = or +to adjust the dividing point preciselyDividing a Track Divide Press ¢or 4to select a track you want to divideTo divide the joined tracks, see the Divide function on When the tracks belongs to a groupMoving a Track Move Press ¢or 4to select a track you want to moveSelect a track you want to erase Press ¢or Erasing Tracks EraseErasing All Tracks ALL Erase Press SET Repeat to select all the tracks you want to eraseAssigning Titles to an MD Insert an MD to edit Press MD Title INPUT/EDIT Press SET to enter the selected title entry modeAssigning the Disc Title, Track Title and Group Title About the number of characters inputted for an MDChanging the Title Using the Timers Setting the Clock Using Recording TimerHow Recording Timer actually works Using Daily Timer How Daily Timer actually worksIf the unit is kept turned on when the timer-on time comes Daily Timer does not work at allUsing Sleep Timer Timer PriorityHow Sleep Timer actually works Maintenance MD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic Coding/ATRAC3Scms Serial Copy Management System Hcms High-speed Copy Management SystemMD/CD Messages Troubleshooting Track Protected X4 Speed Cannot Copy LOW TempSpecifications EN, CH
Top Page Image Contents