JVC UX-F72MD Press AUX, Start playback on the external equipment, Recording Recording Speed Mode

Page 39

Recording the External Equipment

— Sound Synchronized Recording

With this recording method, you can start recording automatically when the source sound comes into this unit through the LINE IN (AUX) jacks.

Sound synchronized Recording will stop automatically if no sound comes into for more than 30 seconds.

You have three methods (MODE 1/5 – 3/5) to record from external equipment onto an MD.

	Recording	Recording	Recording Speed
	mode	length mode	Recording Speed
	mode	length mode
	MODE 1/5	SP	NORMAL SPEED REC

	MODE 2/5	LP2	NORMAL SPEED REC

	MODE 3/5	LP4	NORMAL SPEED REC

As for MODE 4/5 and 5/5, see page 38.

On the main unit ONLY:

1 Insert a recordable MD into the MD loading slot.

• If the MD playback starts, press 7 to stop it.

2 Press AUX.

The source is changed to “AUX.”

3 Press MODE select to select a recording mode (MODE 1/5 – MODE 3/5) you want.

To check the remaining time while recording external equipment onto an MD

On the remote control ONLY:

Press DISPLAY/CHARA.

•Each time you press the button, the recording indications, remaining time, the current track number of the MD, and clock time appear in sequence.

English

Ex.: When recording with MODE 1/5

4 Press REC start.

“AUX Ready” appears on the display.

5 Start playback on the external equipment.

The recording starts automatically when the sound comes into this unit.

To stop recording, press 7.

“UTOCwriting” appears on the display for a while.

To put a track mark manually while recording, press

SET on the remote control at the place you want.

– 34 –

Image 39

Contents UX-F70MD UX-F72MD Page English Front view Class Laser Product Introduction PrecautionsContents Front view Location of the ButtonsMain unit Top viewDisplay window Main UnitRemote Control FM antenna Getting StartedUnpacking To connect an outdoor FM antennaTo attach spacers Connecting SpeakersAM antenna To connect an outdoor AM antennaFor playing the other equipment through this unit Connecting Other EquipmentTo connect speakers To connect another component such as analog audio equipmentPutting the Batteries into the Remote Control To stop and cancel the display demonstration, pressTo start the display illumination manually, press Main unit Front view Remote controlBasic and Common Operations Main unit Top viewSelecting the Sources and Starting Play Turning On the PowerSelecting the Sound Modes Adjusting the VolumeTurning On/Off the Key-touch Tone Reinforcing the Bass SoundTo set TODAY’S Color Setting the Display IlluminationTo adjust and register the color To select the color patternListening to FM and AM Broadcasts To change the FM reception mode Setting the AM Tuner Interval SpacingTuning in a Station Presetting StationsPress SET again Tuning in a Preset StationPress the number buttons to select a preset number On the remote control only Press DISPLAY/CHARAMark Playing Back a CDPlaying Back the Entire CD Normal Play Precautions on CD PlaybackProgram Play Basic CD OperationsTo check the program contents Playing at Random Random PlayTo modify the program Repeat ALL Repeat ONE Repeating Tracks Repeat PlayMark Playing Back an MDPress MD 3 About recording length mode Mdlp seePress MD open/close 0on the main unit Insert an MD into the MD loading slotBasic MD Operations Programing the Playing Order of the Tracks Program PlayTo change the informations on the display Playing Tracks in a Group Group Play To erase the entire program, press MD open/close 0toPress 4or ¢while pressing MD Group to select a group Searching by Title of the Track MD Title Search Playing Back a Tape Playing Back a Tape To play both sides Reverse ModeRecording on MDs To put a track mark manually while recording an Before You Start Recording on an MDAbout the track marks To avoid erasing important recordingsTo check the remaining recording time Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp About High-Speed RecordingRecording FM/AM Broadcasts Recording CD CD Synchronized RecordingBefore recording on an MD To check the remaining time while recording tape onto an MD Recording Tape Tape SynchronizedTo record a single track during play or pause To check the remaining time while recording CD onto an MDRecording Recording Speed Mode Press AUXStart playback on the external equipment Recording on Tapes To keep the best recording and playback sound quality To clean the heads, capstans, and pinch rollersBefore You Start Recording on a Tape To protect your recordingsRecording Reverse mode Mode 4/5 Mode 5/5Mode 8/15 To check the clock time while recording MD onto a tape Mode 1/2 Mode 2/2Recording MD MD Synchronized Recording Recording the External EquipmentSpeed Recording CD onto an MD and a Tape CD Synchronized RecordingAbout MD Group Editing MD GroupsClassifying the tracks on an MD Using MD Group FunctionsHow to Make Up Groups Guidance MD Group FunctionsIntroducing MD Group Editing Press ¢or 4to select the last track of a new group Press Enter to finish the editing procedureForming a Group Form GR During playbackPress ¢or 4to select a track you want to add to a group Adding a Track to a Group Entry GRDividing a Group Divide GR Press SET During playbackJoining Two Groups Join GR To join the divided groups, see the Join GR function toTo divide the joined group, see the Divide GR function on Ungrouping Tracks Ungroup On the remote control only Press SETPress Enter to finish the editing procedure Moving a Group Move GRErasing Tracks in a Group Erase GR Dissolving All Groups Ungr ALLEditing MD Tracks Introducing MD Track Editing Press ¢or 4to select a track you want to divide Press = or +to adjust the dividing point preciselyDividing a Track Divide Joining Two Tracks JoinPress ¢or 4to select a track you want to move When the tracks belongs to a groupMoving a Track Move To divide the joined tracks, see the Divide function onPress SET Repeat to select all the tracks you want to erase Erasing Tracks EraseErasing All Tracks ALL Erase Select a track you want to erase Press ¢orAssigning Titles to an MD About the number of characters inputted for an MD Press SET to enter the selected title entry modeAssigning the Disc Title, Track Title and Group Title Insert an MD to edit Press MD Title INPUT/EDITChanging the Title Using the Timers Setting the Clock Using Recording TimerHow Recording Timer actually works How Daily Timer actually works Using Daily TimerDaily Timer does not work at all If the unit is kept turned on when the timer-on time comesUsing Sleep Timer Timer PriorityHow Sleep Timer actually works Maintenance Atrac Adaptive TRansform Acoustic Coding/ATRAC3 Utoc User Table Of ContentsAdditional Information MD Disc TypesHcms High-speed Copy Management System Scms Serial Copy Management SystemMD/CD Messages Track Protected X4 Speed Cannot Copy LOW Temp TroubleshootingSpecifications EN, CH