JVC UX-F70MD, UX-F72MD manual Playing Tracks in a Group Group Play

Page 30

English

To check the program contents

Before playing, you can check the program contents by pressing 4 or ¢.

•4: Shows the programed tracks in the reverse order.

•¢: Shows the tracks in the programed order.

To modify the program

Before or after playing, you can erase the last programed track by pressing CANCEL. Each time you press the button, the last programed track is erased from the program.

To add tracks in the program before you start play,

press the number buttons to select track numbers you want to add.

To erase the entire program, press MD open/close 0to

eject the MD.

• Turning off the unit will also erase the program.

If you try to program a 33rd step

“MEMORY FULL” will appear on the display.

If your entry is ignored

You have tried to program a track number that does not exist on the MD (for example, selecting track 14 on an MD that only has 12 tracks.) Such entries are ignored.

If the total playing time is 150 minutes (2 hours and 30 minutes) or more

The total playing time will not be shown.

Playing at Random — Random Play

The tracks of the loaded MD will play at random.

On the remote control ONLY:

1 Insert an MD.

2 Press MD 3/ 8, then 7.

The source is changed to “MD.”

3 Press PLAY MODE repeatedly until “RANDOM” appears on the display.

•Each time you press the button, play mode changes as follows:

 

 

PROGRAM

 

 

 

RANDOM

 

 

(Program play)

 

 

 

(Random play)

 

 

Normal play

 

 

GROUP

 

 

 

 

 

 

 

 

 

 

 

 

(Group play)

4 Press MD 3/ 8.

The tracks are played at random.

The current track

MD indicator

Group No. of the track

Elapsed

playing time

Recording

 

 

Play mode

length mode

 

 

Random play stops when all the tracks are played once.

To stop during play, press 7.

To skip the current track, press ¢.

•You cannot go back to the previous tracks by pressing

4.

To exit from Random play mode, press PLAY MODE repeatedly so that the unit enters another playback mode before or after play.

Playing Tracks in a Group — Group Play

You can playback the tracks in the same group. To make a group etc., see pages 40 to 47.

On the remote control ONLY:

1 Insert an MD.

2 Press MD 3/ 8, then 7.

The source is changed to “MD.”

3 Press PLAY MODE repeatedly until “GROUP” appears on the display.

•Each time you press the button, play mode changes as follows:

 

 

PROGRAM

 

 

 

RANDOM

 

 

(Program play)

 

 

 

(Random play)

 

 

Normal play

 

 

GROUP

 

 

 

 

 

 

 

 

 

 

 

 

(Group play)

4 Press 4or ¢while pressing MD GROUP to select a group.

– 25 –

Page 29 Page 31
Image 30
Page 29 Page 31
Contents UX-F70MD UX-F72MD Page English Front view Class Laser Product Precautions IntroductionContents Top view Location of the ButtonsMain unit Front viewMain Unit Display windowRemote Control To connect an outdoor FM antenna Getting StartedUnpacking FM antennaTo connect an outdoor AM antenna Connecting SpeakersAM antenna To attach spacersTo connect another component such as analog audio equipment Connecting Other EquipmentTo connect speakers For playing the other equipment through this unitPutting the Batteries into the Remote Control To stop and cancel the display demonstration, pressTo start the display illumination manually, press Main unit Top view Remote controlBasic and Common Operations Main unit Front viewTurning On the Power Selecting the Sources and Starting PlayReinforcing the Bass Sound Adjusting the VolumeTurning On/Off the Key-touch Tone Selecting the Sound ModesTo select the color pattern Setting the Display IlluminationTo adjust and register the color To set TODAY’S ColorListening to FM and AM Broadcasts Presetting Stations Setting the AM Tuner Interval SpacingTuning in a Station To change the FM reception modeOn the remote control only Press DISPLAY/CHARA Tuning in a Preset StationPress the number buttons to select a preset number Press SET againPlaying Back a CD MarkPrecautions on CD Playback Playing Back the Entire CD Normal PlayBasic CD Operations Program PlayTo check the program contents Playing at Random Random PlayTo modify the program Repeating Tracks Repeat Play Repeat ALL Repeat ONEPlaying Back an MD MarkInsert an MD into the MD loading slot About recording length mode Mdlp seePress MD open/close 0on the main unit Press MD 3Basic MD Operations Programing the Playing Order of the Tracks Program PlayTo change the informations on the display Playing Tracks in a Group Group Play To erase the entire program, press MD open/close 0toPress 4or ¢while pressing MD Group to select a group Searching by Title of the Track MD Title Search Playing Back a Tape To play both sides Reverse Mode Playing Back a TapeRecording on MDs To avoid erasing important recordings Before You Start Recording on an MDAbout the track marks To put a track mark manually while recording anAbout High-Speed Recording Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp To check the remaining recording timeRecording FM/AM Broadcasts Recording CD CD Synchronized RecordingBefore recording on an MD To check the remaining time while recording CD onto an MD Recording Tape Tape SynchronizedTo record a single track during play or pause To check the remaining time while recording tape onto an MDRecording Recording Speed Mode Press AUXStart playback on the external equipment Recording on Tapes To protect your recordings To clean the heads, capstans, and pinch rollersBefore You Start Recording on a Tape To keep the best recording and playback sound qualityRecording Reverse mode Mode 4/5 Mode 5/5Mode 8/15 Recording the External Equipment Mode 1/2 Mode 2/2Recording MD MD Synchronized Recording To check the clock time while recording MD onto a tapeRecording CD onto an MD and a Tape CD Synchronized Recording SpeedEditing MD Groups About MD GroupGuidance MD Group Functions Using MD Group FunctionsHow to Make Up Groups Classifying the tracks on an MDIntroducing MD Group Editing During playback Press Enter to finish the editing procedureForming a Group Form GR Press ¢or 4to select the last track of a new groupPress SET During playback Adding a Track to a Group Entry GRDividing a Group Divide GR Press ¢or 4to select a track you want to add to a groupJoining Two Groups Join GR To join the divided groups, see the Join GR function toTo divide the joined group, see the Divide GR function on Moving a Group Move GR On the remote control only Press SETPress Enter to finish the editing procedure Ungrouping Tracks UngroupDissolving All Groups Ungr ALL Erasing Tracks in a Group Erase GREditing MD Tracks Introducing MD Track Editing Joining Two Tracks Join Press = or +to adjust the dividing point preciselyDividing a Track Divide Press ¢or 4to select a track you want to divideTo divide the joined tracks, see the Divide function on When the tracks belongs to a groupMoving a Track Move Press ¢or 4to select a track you want to moveSelect a track you want to erase Press ¢or Erasing Tracks EraseErasing All Tracks ALL Erase Press SET Repeat to select all the tracks you want to eraseAssigning Titles to an MD Insert an MD to edit Press MD Title INPUT/EDIT Press SET to enter the selected title entry modeAssigning the Disc Title, Track Title and Group Title About the number of characters inputted for an MDChanging the Title Using the Timers Setting the Clock Using Recording TimerHow Recording Timer actually works Using Daily Timer How Daily Timer actually worksIf the unit is kept turned on when the timer-on time comes Daily Timer does not work at allUsing Sleep Timer Timer PriorityHow Sleep Timer actually works Maintenance MD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic Coding/ATRAC3Scms Serial Copy Management System Hcms High-speed Copy Management SystemMD/CD Messages Troubleshooting Track Protected X4 Speed Cannot Copy LOW TempSpecifications EN, CH
Top Page Image Contents