JVC UX-F70MD manual Moving a Track Move, To divide the joined tracks, see the Divide function on

Page 56
Press ENTER to finish the editing procedure. “EDITING” then “UTOCwriting” appears on the display while the editing you have made is being recorded on the MD.

English

3 Press SET.

•During playback:

The current track number starts flashing.

4 Press ¢or 4to select the two adjacent tracks you want to join.

•You can select the track using number buttons. In this case, the selected track starts playback repeatedly.

Ex. When you want to join tracks 1 and 2.

•During playback:

The selected track starts playback repeatedly.

5 Press SET.

“<JOIN>” appears on the display.

•To cancel the setting, press CANCEL, then repeat step 4.

6 Press ENTER to finish the editing procedure.

“EDITING” then “UTOCwriting” appears on the display while the editing you have made is being recorded on the MD.

To divide the joined tracks, see the DIVIDE function on page 50.

If “CANNOT JOIN” appears in step 5

You cannot join the following tracks.

•Tracks recorded using different recording length modes (SP, LP2, LP4) (see page 31.)

•Digital-recording tracks and analog-recording tracks.

•Tracks recorded using monaural long recording method (not possible on this unit) and stereo-recording tracks.

When the tracks belongs to a group

If the preceding track of two tracks you want to join belongs to a group, the newly joined track will belong to the same group; Otherwise, the joined track will not belong to any groups.

Moving a Track — MOVE

This function allows you to move a track to the position you prefer. It is useful to change the order of the tracks as you like. Once a track is moved, the tracks and the other groups are renumbered.

•To stop any time during editing process, press

MD TITLE INPUT/EDIT.

On the remote control ONLY:

1 Insert an MD to edit.

2 Press MD TITLE INPUT/EDIT repeatedly until “MOVE ?” appears on the display.

The source changes to “MD.”

•Each time you press MD TITLE INPUT/EDIT, the edit mode changes as follows:

DISC TITLE? DIVIDE ? JOIN ? MOVE ?

Canceled ALL ERASE? ERASE?

• If you want to stop this editing process, press CANCEL.

3 Press SET.

•During playback:

The current track number starts flashing.

4 Press ¢or 4to select a track you want to move.

•You can select the track using number buttons. In this case, the selected track starts playback repeatedly.

Ex. When you want to move track 2.

•During playback:

The selected track starts playback repeatedly.

5 Press SET.

• To cancel the setting, press CANCEL, then repeat step4.

6 Press ¢or 4 to select the position where you want to move the track.

•You can select the track using number buttons. In this case, the selected track starts playback repeatedly.

Ex. When you want to move track 2 to the position of track 7.

•During playback:

The selected track starts playback repeatedly.

•To cancel the setting, press CANCEL, then repeat step4.

7 Press SET.

“<MOVE>” appears on the display.

• To cancel the setting, press CANCEL, then repeat step4.

8

– 51 –

Page 55 Page 57
Image 56
Page 55 Page 57
Contents UX-F70MD UX-F72MD Page English Front view Class Laser Product Precautions IntroductionContents Location of the Buttons Main unitTop view Front viewMain Unit Display windowRemote Control Getting Started UnpackingTo connect an outdoor FM antenna FM antennaConnecting Speakers AM antennaTo connect an outdoor AM antenna To attach spacersConnecting Other Equipment To connect speakersTo connect another component such as analog audio equipment For playing the other equipment through this unitTo start the display illumination manually, press Putting the Batteries into the Remote ControlTo stop and cancel the display demonstration, press Remote control Basic and Common OperationsMain unit Top view Main unit Front viewTurning On the Power Selecting the Sources and Starting PlayAdjusting the Volume Turning On/Off the Key-touch ToneReinforcing the Bass Sound Selecting the Sound ModesSetting the Display Illumination To adjust and register the colorTo select the color pattern To set TODAY’S ColorListening to FM and AM Broadcasts Setting the AM Tuner Interval Spacing Tuning in a StationPresetting Stations To change the FM reception modeTuning in a Preset Station Press the number buttons to select a preset numberOn the remote control only Press DISPLAY/CHARA Press SET againPlaying Back a CD MarkPrecautions on CD Playback Playing Back the Entire CD Normal PlayBasic CD Operations Program PlayTo modify the program To check the program contentsPlaying at Random Random Play Repeating Tracks Repeat Play Repeat ALL Repeat ONEPlaying Back an MD MarkAbout recording length mode Mdlp see Press MD open/close 0on the main unitInsert an MD into the MD loading slot Press MD 3To change the informations on the display Basic MD OperationsPrograming the Playing Order of the Tracks Program Play Press 4or ¢while pressing MD Group to select a group Playing Tracks in a Group Group PlayTo erase the entire program, press MD open/close 0to Searching by Title of the Track MD Title Search Playing Back a Tape To play both sides Reverse Mode Playing Back a TapeRecording on MDs Before You Start Recording on an MD About the track marksTo avoid erasing important recordings To put a track mark manually while recording anPrecautions for performing long-hour stereo recording Stereo Long-Hour Recording MdlpAbout High-Speed Recording To check the remaining recording timeBefore recording on an MD Recording FM/AM BroadcastsRecording CD CD Synchronized Recording Recording Tape Tape Synchronized To record a single track during play or pauseTo check the remaining time while recording CD onto an MD To check the remaining time while recording tape onto an MDStart playback on the external equipment Recording Recording Speed ModePress AUX Recording on Tapes To clean the heads, capstans, and pinch rollers Before You Start Recording on a TapeTo protect your recordings To keep the best recording and playback sound qualityMode 8/15 Recording Reverse modeMode 4/5 Mode 5/5 Mode 1/2 Mode 2/2 Recording MD MD Synchronized RecordingRecording the External Equipment To check the clock time while recording MD onto a tapeRecording CD onto an MD and a Tape CD Synchronized Recording SpeedEditing MD Groups About MD GroupUsing MD Group Functions How to Make Up GroupsGuidance MD Group Functions Classifying the tracks on an MDIntroducing MD Group Editing Press Enter to finish the editing procedure Forming a Group Form GRDuring playback Press ¢or 4to select the last track of a new groupAdding a Track to a Group Entry GR Dividing a Group Divide GRPress SET During playback Press ¢or 4to select a track you want to add to a groupTo divide the joined group, see the Divide GR function on Joining Two Groups Join GRTo join the divided groups, see the Join GR function to On the remote control only Press SET Press Enter to finish the editing procedureMoving a Group Move GR Ungrouping Tracks UngroupDissolving All Groups Ungr ALL Erasing Tracks in a Group Erase GREditing MD Tracks Introducing MD Track Editing Press = or +to adjust the dividing point precisely Dividing a Track DivideJoining Two Tracks Join Press ¢or 4to select a track you want to divideWhen the tracks belongs to a group Moving a Track MoveTo divide the joined tracks, see the Divide function on Press ¢or 4to select a track you want to moveErasing Tracks Erase Erasing All Tracks ALL EraseSelect a track you want to erase Press ¢or Press SET Repeat to select all the tracks you want to eraseAssigning Titles to an MD Press SET to enter the selected title entry mode Assigning the Disc Title, Track Title and Group TitleInsert an MD to edit Press MD Title INPUT/EDIT About the number of characters inputted for an MDChanging the Title Using the Timers How Recording Timer actually works Setting the ClockUsing Recording Timer Using Daily Timer How Daily Timer actually worksIf the unit is kept turned on when the timer-on time comes Daily Timer does not work at allHow Sleep Timer actually works Using Sleep TimerTimer Priority Maintenance Utoc User Table Of Contents Additional InformationMD Disc Types Atrac Adaptive TRansform Acoustic Coding/ATRAC3Scms Serial Copy Management System Hcms High-speed Copy Management SystemMD/CD Messages Troubleshooting Track Protected X4 Speed Cannot Copy LOW TempSpecifications EN, CH
Top Page Image Contents