Gold's Gym GGTL04607.1 manual Upright Wire

Page 9

7.See the left inset drawing. Identify the outer side of the remaining Frame Spacer (34). Hold the Frame Spacer (34) between the Left Upright (31) and the Lift Frame (59), with the outer side of the Frame Spacer facing the Left Upright. Attach the Left Upright to the Lift Frame with a 3/8" x 3" Bolt (32), a 3/8" Flat Washer (33), and a 3/8" Locknut (47); do not fully tighten the Bolt yet.

8.Route the Upright Wire (28) through one of the Handrails (18) as shown. If necessary, use needlenose pliers to help pull out the Upright Wire. Remove the wire tie from the Upright Wire. Attach the Handrail (18) to the Right Upright (36) with two 5/16" x 2 1/4" Bolts (20) and two 5/16" Star Washers (19). Be careful not to pinch the

Upright Wire (28).

Attach the other Handrail (18) to the Left Upright (31) with two 5/16" x 2 1/4" Bolts (20) and two 5/16" Star Washers (19).

7

 

31

 

 

 

 

 

 

 

47

 

 

 

 

 

32 33

34

 

 

 

 

 

 

 

59

 

 

 

 

 

 

 

 

 

 

 

34

Outer

 

 

Top View

47

 

 

 

 

31

 

 

 

Side

 

32

33

 

 

 

 

Inner

 

 

34

 

 

 

 

 

 

 

 

Side

 

 

 

 

59

 

 

 

 

 

 

 

8

20

 

 

 

 

 

 

 

 

 

 

 

Wire Tie

 

19

31

 

20

28

 

 

 

 

 

 

 

18

 

18

19

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

36

 

 

9

Image 9
Contents Model No. GGTL04607.1 Serial No QUESTIONS?Table of Contents When connecting the power cord see Important PrecautionsUse Pulse sensor is not a medical devicePage Before YOU Begin Assembly Fully tighten the Bolts yet Tighten the Bolts yetDo not overtighten the Bolts the Wheels Should turn freely See the left inset drawing. Identify the two Outer side of the Frame Spacer facingFully tighten the Bolt yet Upright Wire Front View Side View View from Above BoltsMake sure that no wires are pinched. Reattach Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Features of the Console Console DiagramHOW to USE the Manual Mode HOW to Turn on the PowerSelect the manual mode Insert the key into the consoleMeasure your heart rate if desired Follow your progress with the displaySelect one of the heart rate workouts HOW to USE AN Event Training Workout Enter your weight if desiredSelect an event training workout. To select an Enter your weight HOW to USE a Weight Loss WorkoutSelect a weight loss workout. To select a Press the Start button to start the workoutSelect one of the classic workouts. To select one HOW to USE a Classic WorkoutInformation Mode HOW to USE the Stereo Sound SystemOptional Chest Pulse Sensor HOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useCompatible with GFCI-equipped outlets Unplug the Power CORD. If the walking View Problem The walking belt slows when walked onKey and Unplug the Power CORD. Using TopExercise Intensity Exercise GuidelinesWorkout Guidelines Exercise FrequencySuggested Stretches R0608A Key No. Qty DescriptionQty Description Exploded Drawing A-Model No. GGTL04607.1 R0608A Exploded Drawing B-Model No. GGTL04607.1 R0608A Exploded Drawing C-Model No. GGTL04607.1 R0608A Exploded Drawing D-Model No. GGTL04607.1 R0608A Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT