NordicTrack NTHK22490 user manual HOW to Connect Your Home Stereo HOW to Connect Your Computer

HOW TO CONNECT YOUR HOME STEREO

Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B.

HOW TO CONNECT YOUR COMPUTER

Note: If your computer has a 3.5mm LINE OUT jack, see instruction A. If your computer has only a PHONES jack, see instruction B.

A. Plug one end of the audio cable into the jack on the side of the hiker near the power cord. Plug the other end of the cable into the included adapter. Plug the adapter into the LINE OUT jack on your stereo.

A. Plug one end of the audio cable into the jack on the side of the hiker near the power cord. Plug the other end of the cable into the LINE OUT jack on your computer.

A	CD
	VCR
	Amp	LINE OUT
	LINE OUT
Audio	Adapter
Cable

B. Plug one end of the audio cable into the jack on the side of the hiker near the power cord. Plug the other end of the cable into the included adapter. Plug the adapter into an RCA Y-adapter (available at elec- tronics stores). Next, remove the wire that is cur- rently plugged into the LINE OUT jack on your stereo and plug the wire into the unused side of the RCA Y-adapter. Plug the RCA Y-adapter into the LINE OUT jack on your stereo.

B	CD
	VCR
	Amp	LINE OUT
	RCA
Audio	Y-adapter
	Adapter
Cable
Wire removed from
LINE OUT jack

A

LINE OUT

Audio

Cable

B. Plug one end of the audio cable into the jack on the side of the hiker near the power cord. Plug the other end of the cable into a 3.5mm Y-adapter (available at electronics stores). Plug the Y-adapter into the PHONES jack on your computer. Plug your head- phones or speakers into the other side of the Y- adapter.

B
	PHONES
Audio	3.5mm
Cable	Y-adapter
Headphones/Speakers

18