39 |
|
|
91 | 85 3/8 X | |
|
| |
23 |
|
|
| 21 | 95 LOW |
|
| HEIGHT |
95 LOW |
|
|
HEIGHT |
|
|
| 52 | 10 |
|
| |
1/2 X 3” | 87 | 1/2 X |
|
| |
FIGURE 33 |
|
|
STEP 33
•SECURELY assemble the PRESS SUPPORT TUBE (21) to the PRESS SWIVEL (10) using one 1/2” X
SUPPORT TUBE to rotate freely).
•SECURELY assemble the PRESS BACK SUPPORT (23) to the PRESS SUPPORT TUBE (21) using one 1/2” X 3” BOLT (87) and one 1/2” LOW HEIGHT LOCK NUT (95). (NOTE: Tighten the connection enough to remove play, yet allowing the
PRESS BACK SUPPORT to rotate freely).
•SECURELY assemble one 1/2” SPRING PIN ASSEMBLY (52) to the spring pin housing on the PRESS SUPPORT TUBE (21).
(NOTE: Tighten the nut of the SPRING PIN ASSEMBLY SECURELY.)
•SECURELY assemble the BACK PAD (39) to the PRESS BACK SUPPORT (23) using two 3/8 X
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
| 1/2 |
|
| 1/2 |
0 | 1 | 2 | 3 | 4 | 5 | 6 |
29