ParaBody 425104 manual 83 3/8

FLOATING
PULLEY
	83 3/8 X
	1-1/4”
	101
15	91
	92
1
101
FIGURE 44

STEP 44

•To assemble the LEG CABLE (101) follow the cable routing as shown and use the following steps:

•SECURELY attach the LEG CABLE (101) to the LEG CURL/EXT (15) using one 3/8 X 1-1/4” BOLT (83), one 3/8” WASHER (91), and one 3/8” LOCK NUT (92). See FIGURE 44.

•Route the LEG CABLE (101) around the pulleys in the BASE (1) and through the floating pulley as shown in FIGURE 44.

			FIGURE 45		STEP 45
					• Run the LEG CABLE (101) through the
					hole of the D-RING (7) and attach one
					KEYHOLE CLEVIS (66) to the end of
					the LEG CABLE (101). See FIGURE 45.
101
				66
				101
		LAT CABLE
		PRESS CABLE		7
1/2	1/2	1/2	3	1/2	1/2	1/2
0	1	2		4	5	6
			38