ParaBody 425104 manual See Detail

FIGURE 42	92	25
		103 AB CABLE
	42		91
SEE DETAIL 39		49
		3/8 X 2-3/4”	85
			DETAIL 42

STEP 42

•Securely assemble the ball end of the AB CABLE (103) and one 3-1/2” PULLEY (42) to the FRONT UPRIGHT (25) using two 3/8 X 2- 3/4” BOLTS (85), two 3/8” FLANGE SPACERS (49), two 3/8” WASHERS (91), and two 3/8” LOCKNUTS (92). (NOTE: TheAB

CABLE (103) should be routed underneath the retaining bolt as shown in DETAIL42.)

FIGURE 43	STEP 43
	• Run the AB CABLE (103) through the
	floating pulley assembly, then screw the
29	threaded end of AB CABLE (103) approxi-
103	mately 3/4” into the end of the PULLEY
	BRACKET (29) and tighten jam nut
	securely as shown in FIGURE 43.
FLOATING	IMPORTANT! Make sure the cables are
PULLEY
	running in the grooves of all pulleys.
37