Gold's Gym GGEL66008.0 manual Avoid pinching Wires

11.While another person holds the Console (11) near the Upright (10), connect the console wire to the Wire Harness (64). Insert the excess wire into the Upright.

Tip: Avoid pinching the wires. Attach the Console (11) to the Upright (10) with four M4 x 16mm Screws (78).

12.Identify the Right Pedal (35), which is marked with an “R” sticker. Orient the Right Pedal and a Pedal Arm (32) as shown.

Attach the Right Pedal (35) to the Pedal Arm (32) with three M8 x 40mm Patch Screws (90) and three M8 Split Washers (97).

Repeat this step to attach the Left Pedal (not shown) to the other Pedal Leg (not shown).

11	11
	Console Wire
	64
	78
	10	78
Avoid pinching	78
the wires
12	35
	32
	97
	90

11