Star Trac S-UBX UPRIGHT BIKE, S-RB RECUMBENT BIKE, S-RBX RECUMBENT BIKE manual Install the Rear Foot

Page 16

Stand the bike frame upright and place the front foot assembly under the frame, aligning the holes in the foot with the holes in the frame.

NOTE: It may be necessary to raise the frame slightly to align the holes in the frame with the mating holes in the front foot.

Using four M10 X 30 button head screws, secure the front foot assembly to the frame. Tighten all four screws securely.

Step 1

2. Install the Rear Foot

Lift up the rear of the bike frame and place the rear foot assembly in position under the frame, aligning the holes in the foot with the holes in the frame.

Using four M10 X 30 button head screws, secure the rear foot assembly to the frame. Tighten all four screws securely.

Step 2

3. Install the Display Console

NOTE: It is necessary to have one person support and position the display console while a second person makes the cable connections.

Carefully pull the cable bundle out of the lower neck on the bike frame. Use a pair of wire cutters or other suitable tool to cut and remove the tie wrap from the cable bundle.

Step 3a

Hold the display console neck approximately one inch from the neck brackets of the bike frame. Plug the display console power, main I/O and Coax cable into their mating connectors in the display console neck.

Step 3b

NOTE: The power connector is a “loose” fit. A strip of electrical tape for securing the power connector is provided inside the lower neck on the bike frame.

16	STAR TRAC S SERIES BIKES OWNER’S MANUAL

Image 16

Contents N E R ’ S M a N U a L Table of Contents Page Upright Bike Recumbent Bike Introduction About this ManualPrecautions Safety InstructionsDo Not Veiligheidsinstructies WaarschuwingConsignes DE Securite Mise EN GardeSicherheitsvorschriften WarnungInstruzioni DI Sicurezza AttenzioneInstruções DE Segurança AdvertênciaInstrucciones DE Seguridad AdvertenciaRåd Chinese Safety Instructions HereAdvarsler Japanese Safety Instructions Here Assembly and Setup Series Upright Bike Assembly and SetupAssembly UnpackingInstall the Rear Foot Install the Display ConsoleInstall the Pedals Install the Seat PostLeveling the Bike Series Recumbent Bike Assembly and Setup Install the Rear Foot Install the Seat Frame Seat Adjustments Adjusting Seat Height S-UB / S-UBx Upright BikeAdjusting Seat Position S-RB / S-RBx Recumbent Bike Operating InstructionsDisplay Panel Features Pedal Strap OperationUsing the Personal FAN Hints and Tips for Getting StartedCooldown Cycle To operate the bike during CooldownHeart Rate Monitoring Lockout ID ProcessingContact Heart Rate Monitoring Chest Strap Heart Rate MonitoringPreset Programs Quick StartManual Program To operate the Quick Start programBurn Calories Program To operate the Burn Calories programIncrease Endurance Program To operate the Increase Endurance programHeart Rate Control Programs Advanced Workouts ProgramsTo operate the Constant Heart Rate Control program Heart Rate Training Range Upper Level ProgramHeart Rate Training Range Lower Level Fitness Test Burn FAT ProgramTo operate the Burn FAT Control program To operate the Fitness Test program Goal WorkoutsTo operate the Calorie Goal program To operate the Distance Goal program Auto Pilot ProgramTo operate the Auto Pilot program Daily Maintenance Preventative MaintenanceWeekly Maintenance Monthly Maintenance Manager / Maintenance ModeManager Mode Maintenance Mode LOE OFF START-UP Service Messages TroubleshootingRegulatory Information Star Trac