JVC RX-DP10VBK “Sub Room.”, Canceling the Sub-RoomOperations, Set MAIN ROOM/SUB ROOM, On the unit

SUB ROOM

ON/OFF

STANDBY

STANDBY / ON

To turn off the power (into standby mode),

press (STANDBY/ON) again.

The STANDBY lamp lights up, and the front door automatically closes. (The MAIN ROOM ON/OFF and/or SUB ROOM ON/OFF lamp goes off.)

•A small amount of power is consumed in standby mode. To turn the power off completely, unplug the AC power cord.

From the remote control:

1. Set MAIN ROOM/SUB ROOM

(LEARN/TRANSMIT) selector to	LEARN TRANSMIT
“SUB ROOM.”
Now the buttons on the remote control work	MAIN ROOM SUB ROOM

for the sub-room operations.

2. Press AUDIO (ON).

The STANDBY lamp on the unit goes off, and the SUB ROOM ON/OFF lamp on the unit lights up.

STANDBY ON

SUB ROOM		RX-D
ON/OFF		P10V
	AUDIO/V
	IDEO	CONTROL
		REC
		EIVER

•When connecting the sub-room front speakers to the FRONT 2/SUB ROOM SPEAKERS terminal, see also “Preparing for the Sub-RoomOperations—SUB ROOM” on page 40, and “Activating the Sub-Room Front Speakers” on page 30.

Canceling the Sub-Room Operations

On the unit:
To stop the sub-room operations and sounds			SUB ROOM
through the sub-room speakers, press SUB ROOM			ON/OFF
ON/OFF so that the SUB ROOM ON/OFF lamp goes
off.
No sound will be heard in the sub-room, and the
display changes to show the main room source.
		SPEAKERS	1 SUB ROOM
			VOLUME
			dB
	ANALOG	SPEAKERS	1
	L R
	SUBWFR		VOLUME
			dB

To use this receiver for the sub-room operations again 1. Press SUB ROOM ON/OFF again so that the

SUB ROOM ON/OFF lamp lights up.

2. Press SUB ROOM CONTROL (inside the

front door).	SUB ROOM
	CONTROL
The name of the current source for the sub-
room appears on the display.
	SPEAKERS 1 SUB ROOM
	VOLUME

dB

To turn off the power (into standby mode),

press AUDIO (STANDBY).

The STANDBY lamp lights up, and the front door automatically closes. (The MAIN ROOM ON/OFF and/or SUB ROOM ON/OFF lamp on the unit goes off.)

Note:

If you have turned off the receiver with the volume level set at more than level “–35 dB,” the volume level will be automatically set at level

From the remote control:

To stop the sub-room operations and sounds through the sub-room speakers, press SUB ROOM

ON/OFF so that the SUB ROOM ON/OFF lamp on the unit goes off.

To use this receiver for the sub-room operations

again, press SUB ROOM ON/OFF again.

Notes:

SUB ROOM

ON/OFF

SUB ROOM

ON/OFF

“–35 dB” next time you turn on the receiver.

•If you have turned off the sub-room sound with the volume level set at more than level “–35 dB,” the volume level will be automatically set at level “–35 dB” next time you turn on the sub-room sound.

•If “TURN ON MAIN OR SUB ROOM” appears on the display, press MAIN ROOM ON/OFF or SUB ROOM ON/OFF to listen to the sound in the main room or in the sub-room; otherwise, the receiver will turn off after about 1 minute.

28