JVC RX-DP10VBK Adjusting the Surround Sounds Temporarily, Press SOUND, output balance, adjust

Adjusting the Surround Sounds Temporarily

Activating the THX Surround and conventional Surround mode for a source automatically recalls the memorized settings and adjustments done on the Setup and Adjustment Menus.

However, if you want to modify the stored adjustments temporarily only for the current playback source, you can use the TEST button and the number buttons on the remote control.

IMPORTANT:

Check to see if the following before or while using the buttons and controls.

1. Press SOUND. SOUND

The 10 keys are activated for sound adjustments.

2. Press TEST once to check the speaker

TEST

output balance.

The test tone comes out of all the activated speakers in the following sequence:

Left front speaker = Center speaker = Right front speaker

=Right surround speaker = Right surround back speaker

=Left surround back speaker = Left surround speaker

=Subwoofer = (Back to the beginning)

For the main room operations:

The MAIN ROOM ON/OFF lamp on the unit is lit.

•When using the remote control:

–Set the MAIN ROOM/SUB ROOM (LEARN/TRANSMIT) selector to “MAIN ROOM.”

–Check the indication shown on the remote’s display when you press a button—this indicates the remote control operation mode together with multi-room operation mode (either MAIN ROOM or SUB ROOM) for a while (10 or 5 seconds).

	LEARN TRANSMIT
		STANDBY	ON
	MAIN ROOM SUB ROOM
LEARN TRANSMIT	MAIN ROOM	SUB ROOM TV/CATV/DBS	VCR 1
	ON/OFF	ON/OFF
		STANDBY/ON	STANDBY/ON

Notes:

•The LEVEL submenu (see page 44) appears on the TV screen.

•If “NO” or “NONE” is selected for a speaker on the SPEAKER SETTING submenu (page 36), test tone does not come out of that speaker, and adjustments in the following steps cannot be made.

3. Select the speaker you want to			EFFECT
	1	2	3
adjust.
			ROOM SIZE
The selected speaker name appears on the	4	5	6
remote’s display for a while.			LIVENESS
	7/P	8	9
• To select the left front speaker, press			WALL
	10	0	+10
FRONT•L.

MAIN ROOM SUB ROOM

MAIN ROOM

RETURN FM MODE 100+

Ex. When you press SOUND with

MAIN ROOM/SUB ROOM (LEARN/TRANSMIT) selector set to “MAIN ROOM.”

Before you start, remember...

•Adjustments using the number buttons are temporary and cannot be stored.

When you change the source or turn off the power, the adjustments are erased.

•Make sure that you have set the speaker information correctly (see page 36). You cannot select and adjust the output level of the speaker if the speaker is not activated (set to “NONE” or “NO”)

on the SPEAKER SETTING submenu.

CAUTION:

Test tone is automatically fixed to 0 dB, but this level will be louder

than you would expect.

•To select the center speaker, press CENTER.

•To select the right front speaker, press FRONT•R.

•To select the right surround speaker, press SURR•R.

•To select the right surround back speaker, press SURR BK•R.

•To select the left surround back speaker, press SURR BK•L.

•To select the left surround speaker, press SURR•L.

•To select the subwoofer, press SUBWFR.

4. Press LEVEL +/– to adjust the speaker output levels.

The speaker name selected in the above step and its level appear on the unit’s display.

•You can adjust the levels as follows:

–Left and right front speakers : –20 dB to +20 dB

– Other speakers : –10 dB to +10 dB

5.Repeat steps 3 and 4 to adjust the other speaker output levels.

6.Press TEST again to stop the test tone.

49