JVC RX-DP10VBK Main Room Operations, Turning the Power On and Off Standby, On the unit, Notes

STANDBY

STANDBY / ON

Main Room Operations

This section explains only the operations commonly used when you play any sound source in the main room. See pages 27 to 30 for the sub-room operations.

•Before performing main room operations, it is recommended to finish the basic settings on pages 33 to 40.

IMPORTANT:

Check to see if the following before or while using the buttons and controls.

For the main room operations:

The MAIN ROOM ON/OFF lamp on the unit is lit.

•When using the unit:

– “SUB ROOM” is not shown in the main display.

– Press DOOR DOWN to use the buttons inside the	DOOR
	DOWN
front door.
To close the front door, press DOOR UP.

•When using the remote control:

To turn off the power (into standby mode),

press (STANDBY/ON) again.

The STANDBY lamp lights up, and the front door automatically closes. (The MAIN ROOM ON/OFF and/or SUB ROOM ON/OFF lamp goes off.)

•A small amount of power is consumed in standby mode. To turn the power off completely, unplug the AC power cord.

From the remote control:

To turn on the power, press STANDBY ON

–Set the MAIN ROOM/SUB ROOM (LEARN/TRANSMIT) selector to “MAIN ROOM.”

–Check the indication shown on the remote’s display when you press a button—this indicates the remote control operation mode together with multi-room operation mode (either MAIN ROOM or SUB ROOM) for a while (10 or 5 seconds).

	LEARN TRANSMIT
		STANDBY	ON
	MAIN ROOM SUB ROOM
LEARN TRANSMIT	MAIN ROOM	SUB ROOM TV/CATV/DBS	VCR 1
	ON/OFF	ON/OFF
		STANDBY/ON	STANDBY/ON

AUDIO (ON). The STANDBY lamp goes off, and the

MAIN ROOM ON/OFF lamp on the unit lights up.

The front door moves down (so that the source selecting buttons appear).

The last main room source is activated.

ANALOG

L	R	SPEAKERS	1
SUBWFR			VOLUME

MAIN ROOM SUB ROOM

MAIN ROOM

	dB
The last Surround/DSP mode or	The volume
other information appears.	level appears.

Ex. When you press FM with

MAIN ROOM/SUB ROOM (LEARN/TRANSMIT) selector set to “MAIN ROOM.”

Turning the Power On and Off (Standby)

On the unit:
To turn on the power, press	(STANDBY/ON).

The STANDBY lamp goes off, and the MAIN ROOM ON/OFF lamp lights up. The front door moves down (so that the source selecting buttons appear).

STANDBY
STANDBY / ON
MAIN ROOM		RX-D
ON/OFF		P10V
	AUDIO
	/VIDEO	CONTROL
		RECEIVER

The last main room source is activated.

ANALOG		SPEAKERS	1
L	R
SUBWFR			VOLUME

	dB
The last Surround/DSP mode or	The volume
other information appears.	level appears.

The currently selected speakers 1 and/or 2 indicator(s) also light(s) up on the display.

• If neither speakers 1 nor 2 indicator is lit on the display, see “Activating the Main Room Front Speakers” on page 23.

The currently selected speakers 1 and/or 2 indicator(s) also light(s) up on the display.

•If neither speakers 1 nor 2 indicator is lit on the display, see “Activating the Main Room Front Speakers” on page 23.

To turn off the power (into standby mode),
press AUDIO	(STANDBY).	STANDBY	ON
The STANDBY lamp lights up, and the front
door automatically closes. (The MAIN ROOM
ON/OFF and/or SUB ROOM ON/OFF on the
unit lamp goes off.)

Notes:

•Before you turn off the receiver in the main room, make sure if no one is listening to any source in the sub-room (the SUB ROOM ON/ OFF lamp is lit on the display) since the sub-room sound will also be turned off unexpectedly.

•If you have turned off the receiver with the volume level set at more than level “–35 dB,” the volume level will be automatically set at level “–35 dB” next time you turn on the receiver.

When you turn on the TV connected to the TV SOUND/DBS jacks on the rear

This receiver automatically turns on and selects “TV” as the main room source about 5 seconds after you turn on the TV. (If you change the source name from “TV” to “DBS,” the receiver will not turn on along with the TV. See “Changing the Source Name” on page 25.)

20