JVC RX-DP10VBK Press %/ Þto move to “GENRE,” then press SET, to “TITLE INPUT,” then press SET

Search for a disc by its genre:

1. Press TEXT DISPLAY while “CD” is selected as the source.

The Disc Information screen appears on the TV.

2. Press %/ Þto move to “SEARCH,” then press SET.

The DISC SEARCH screen appears.

3.Press %/ Þto move

to “GENRE,” then

press SET.

The GENRE SEARCH screen appears.

4.Press %/ Þto move to the genre you want to search for, then press

SET.

To show the unseen genres,

press %/ Þ until they appear.

Disc search starts, then the SEARCH RESULT screen, showing the disc titles, appears.

5. On the SEARCH RESULT screen, you can do the following:

• Changing the indication of the disc information:

Press %/ Þto move to a searched for disc, then press @/ #. Each time

you press @/ #, the disc information alternates between its disc title and its performer.

•Starting a disc play and going to the Disc Information

screen (see page 57): Press % / Þ to move to a searched for disc, then press SET.

•Showing unseen disc information (if more than 5 discs are listed as a result of the search): Press % / Þ until they appear.

•Going back to the GENRE SEARCH screen: Press EXIT.

Entering the Disc Information

For the CD Player with the disc memory function:

You can use the disc memory function through this receiver.

The disc information (its performer, disc title, and music genre) of normal audio CDs will be stored into the memory built in the CD player.

For the disc memory function, refer to the manual supplied with your CD player.

•The performer, disc title, and music genre information are usually recorded on a CD Text. However, if a CD Text has no genre information recorded on the disc itself, you can input its music genre by yourself.

Note:

You can enter the TITLE INPUT screens for a CD Text and input its titles. However, you cannot store the titles you have input for a CD Text.

Example: Entering the following information for Disc 1 Performer: “MICHAEL”

Disc title: “MY FAVORITE”

1. Press TEXT DISPLAY while “CD” is selected as the source.

The Disc Information screen appears on the TV.

2. Press %/ Þto move

to “TITLE INPUT,” then press SET.

The TITLE INPUT:

PERFORMER screen appears.

3.Press %/ Þ/ @/ #to move in front of a character you want, then press SET to enter the character.

•If the current CD is a CD Text, go to step 5 without entering the performer.

To use the lower-case letters, press %/ Þ/ @/ #to move

to , then press SET.

To use the upper-case letters again, press %/ Þ/ @ / #to

move to , then press SET.

59