JVC RX-DP10VBK Operating JVC’s Audio/Video Components, Operating Audio Components, Tuner, Notes

Page 67
Operating JVC’s Audio/Video Components

Operating Audio ComponentsTuner Operating JVC’s Audio/Video Components

You can operate JVC’s audio and video components with this receiver’s remote control, since control signals for JVC components are preset in the remote control.

Operating Audio Components

IMPORTANT:

To operate JVC’s audio components using this remote control:

•You need to connect JVC audio components through the COMPU LINK (SYNCHRO) jacks (see page 54) in addition to the connections using cables with RCA pin plugs (see pages 9 and 10).

•Aim the remote control directly at the remote sensor on the receiver.

•To operate a source with the remote control, the source must be selected using source selecting buttons on the remote control.

•To operate the cassette deck or MD recorder using the COMPU LINK remote control system, set the source name correctly. (See page 25.)

•Refer also to the manuals supplied with your components.

When using the remote control:

–Set MAIN ROOM/SUB ROOM (LEARN/TRANSMIT) selector to “MAIN ROOM” or “SUB ROOM” correctly.

–Check the indication shown on the remote’s display when you press a button—this indicates the remote control operation mode together with multi-room operation mode (either MAIN ROOM or SUB ROOM) for a while (10 or 5 seconds).

–The CONTROL button can change the remote control operation mode without changing the source.

Each time you press the button, the remote control operation mode changes in the sequence—VCR1 =TAPE =CDR =CD DISC =(back to the beginning).

LEARN TRANSMIT

 

LEARN TRANSMIT

 

MAIN ROOM SUB ROOM

 

MAIN ROOM SUB ROOM

LEARN

TRANSMIT

 

LEARN

TRANSMIT

 

 

 

 

 

 

STANDBY

ON

 

STANDBY

ON

MAIN ROOM SUB ROOM

 

MAIN ROOM SUB ROOM

 

 

MAIN ROOM

SUB ROOM TV/CATV/DBS

VCR 1

MAIN ROOM

SUB ROOM TV/CATV/DBS

VCR 1

 

 

 

ON/OFF

ON/OFF

 

ON/OFF

ON/OFF

 

 

 

 

 

 

STANDBY/ON STANDBY/ON

 

STANDBY/ON

STANDBY/ON

 

 

 

 

MAIN ROOM

 

 

SUB ROOM

 

 

 

 

 

Ex. When you press FM

Ex. When you press FM

with MAIN ROOM/SUB

with MAIN ROOM/SUB

ROOM (LEARN/

ROOM (LEARN/

TRANSMIT) selector

TRANSMIT) selector

set to “MAIN ROOM.”

set to “SUB ROOM.”

 

 

Tuner

You can always perform the following operations:

FM

: Tunes into the last selected FM station.

AM

: Tunes into the last selected AM station.

After pressing FM or AM, you can perform the following operations:

1 – 10, +10

: Selects a preset channel number directly.

 

For channel number 5, press 5.

 

For channel number 15, press +10, then 5.

 

For channel number 20, press +10, then

 

10.

TUNING UP/DOWN

: Tunes into stations.

FM MODE

: Changes the FM reception mode.

Sound control section (Amplifier)

You can always perform the following operations:

THX ON/OFF

: Turns on or off the THX Surround

 

modes—TH X Surround EX or THX

 

Cinema.

SURROUND ON/OFF

: Turns on or off the conventional

 

Surround modes—Dolby Digital, DTS

 

Surround, and Dolby Pro Logic.

DSP MODE

: Selects the DSP modes.

TEST

: Turns on or off the test tone output.

After pressing SOUND, you can perform the following operations:

FRONT•L then LEVEL +/– : Adjusts the left front speaker channel output level.

FRONT•R then LEVEL +/– : Adjusts the right front speaker channel output level.

SUBWFR then LEVEL +/– : Adjusts the subwoofer output level.

CENTER then LEVEL +/– : Adjusts the center speaker channel output level.

SURR•L then LEVEL +/– : Adjusts the left surround speaker channel output level.

SURR•R then LEVEL +/– : Adjusts the right surround speaker channel output level.

SURR BK•L then LEVEL +/– : Adjusts the left surround back speaker channel output level.

SURR BK•R then LEVEL +/– : Adjusts the right surround back

 

channel speaker output level.

EFFECT

: Selects the effect level.

ROOM SIZE

: Selects the room size.

LIVENESS

: Selects the liveness.

WALL

: Selects the wall type.

LINE DIRECT

: Turns on or off Line Direct.

CC CONVERTER

: Turns on or off CC Converter.

Notes:

•After adjusting sounds, press the corresponding source selecting button to operate your target source by using the 10 keys; otherwise, the 10 keys cannot be used for operating your target source.

•Each time you press LEVEL + or LEVEL –, the corresponding speaker name appears on the remote’s display.

64

Page 66 Page 68
Image 67
Page 66 Page 68
Contents LVT0722-003A RX-DP10VBKAUDIO/VIDEO CONTROL RECEIVER INSTRUCTIONSWARNING: TO REDUCE THE RISK OF FIRE Caution ––STANDBY/ON switchCaution––SPEAKERLOAD SELECTOR switch Warnings, Cautions and OthersNote to CATV system installer For the remote controlFor the main unit Using the Surround Modes Table of ContentsBasic Settings Sound AdjustmentsRF/IR multi-brand/learningremote control FeaturesPrecautions IntroductionParts Identification 1SPEAKERS 1 button 18, Front PanelDisplay Window Refer to the pages in parentheses for details12 3 Getting Started Before InstallationConnecting the FM and AM Antennas Checking the Supplied AccessoriesMain room speaker layout Connecting the SpeakersAM Antenna Connections NotesBasic connecting procedure 3Insert the speaker signal cable2Turn the knob counterclockwise 4Turn the knob clockwisePower amplifier Power amplifierPower amplifier Power amplifier Connecting Audio/Video ComponentsR DVD L CD playerCD recorder Cassette deck or MD recorderVCRs Video component connectionsVideo camera DBS tuner TV and/or DBS tunerNotes DVD player Digital input terminals Digital ConnectionsDigital output terminal to the IR signal transmitter Setting Up the RF Rod AntennaSetting Up the IR Signal Transmitter 1. Find the place where you attach the IR signal3.Replace the cover Putting Batteries in the Remote ControlConnecting the Power Cord 2.Insert the batteriesSub-roomLayout Multi-RoomOperationsRequired Connections for Sub-Room Power amplifierLEARN/TRANSMIT selector to Basic Operating Procedure for Main Room1. Press STANDBY/ON 1. Set MAIN ROOM/SUB ROOM4. Press VOLUME +/– to adjust the Basic Operating Procedure for Sub-Room6. Turn MASTER VOLUME to adjust the volume level of theTo turn on the power, press Turning the Power On and Off StandbyMain Room Operations From the remote controlSpeaker and signal indicators on the display Canceling the Main Room OperationsSelecting the Main Room Source to Play SUBWFRas the VCR or DVD player, etc Adjusting the Main Room VolumeSUBWFR LFE 1. Press SOUND SELECTOR insideSelecting the Analog or Digital Input Mode Activating the Main Room Front SpeakersMuting the Main Room Sound Attenuating the Input Signalheadphones connected Press and hold INPUT MODE/INPUT INPUT MODETurning Line Direct On and Off Changing the Display BrightnessPress DIMMER Making Sounds NaturalFrom the remote control ONLY Using the Sleep TimerPress SLEEP repeatedly Basic adjustment auto memorythe SUB ROOM ON/OFF lamp lights Sub-RoomOperationsand Selecting the Sub-RoomOperations 2. Press SUB ROOM ON/OFF so thatFrom the remote control Canceling the Sub-RoomOperations“SUB ROOM.” From the remote controlOn the unit Adjusting the Sub-RoomVolumeSelecting the Sub-RoomSource to Play From the remote controlMuting the Sub-RoomSound Activating the Sub-RoomFront SpeakersPress SPEAKERS 2/SUB ROOM to activate the sub-roomfront speakers1. Press FM or AM Tuning into Stations Manually2.Press TUNING UP or TUNING Receiving Radio Broadcaststhe front door to select a Using Preset Tuning2. Press SET inside the front door 3. Press RIGHT or LEFT insideSetup Menu Configuration Basic SettingsFor the main room operations Operation through On-ScreenDisplay MenusFrom the remote control Menu operation buttonsrepeatedly to select an item Menu Operating Procedure1. Press SETUP MENU 3. Press SET7For subwoofer Setting the Speakers —SPEAKERSETTINGSetting the Speaker Distance —SPEAKERDISTANCE LSB RSB7Changing the sound phase Setting the Bass Sounds—SUBWOOFER37Setting the crossover frequency 7Setting the low frequency effect attenuator LFE7Setting THX Surround EX Setting the Dynamic Range —DYNAMICRANGESetting the Digital Input Terminals -DIGITALIN 7Setting the Midnight modeWhen “COAXIAL INPUT” is set to “TV” or “DBS” Turning On and Off the Video Output —VIDEOPOWERWhen “COAXIAL INPUT” is set to “DVD” When “COAXIAL INPUT” is set to “CD”Preparing for the Sub-RoomOperations —SUBROOM p Adjustment Menu Configuration Sound AdjustmentsFor the main room operations From the remote controlOperation through On-ScreenDisplay Menus Menu operation buttonsrepeatedly to select an item 1. Press ADJUST MENUMenu Operating Procedure 3. Press SETNotes Adjusting the Parametric Equalizer —PARAMETRICEQ7Adjusting the speaker channel output levels 7Adjustment procedure on this submenu7Adjustment screen Adjusting the DSP Parameters —DSPPARAMETERAdjusting the Center Channel —CENTERCHANNEL 7 Adjustment procedure on this submenuTHX Surround EX Dolby Digital EX Using the Surround ModesReproducing Theater Ambience Introducing the Surround ModesDTS Digital Surround Surround modes available for input signalsInput Signals Dolby Surround Dolby Pro Logic1.Select and play any sound source Activating the Surround Modesoutput balance Adjusting the Surround Sounds Temporarily1. Press SOUND 2. Press TEST once to check the speakerDAP modes Using the DSP ModesReproducing the Sound Field Introducing the DSP Modes1.Select and play any sound source Activating the DSP Modes2.Press DSP MODE repeatedly until the DSP mode you want appears on the display4. Press LIVENESS to adjust the Adjusting the DSP Parameters Temporarily2. Press EFFECT to adjust the overall 3. Press ROOM SIZE to adjust the roomActivating the DVD MULTI Playback Mode Using the DVD MULTI Playback ModeFor the main room operations COMPU LINK Remote Control SystemNotes Automatic Source Selection3. Press the play 3 button on the CD player the same timeCONNECTIONS TEXT COMPU LINK Remote Control SystemFUNCTIONS Note on OPERATIONSDisc Information screen To exit from the Disc information screen4. Press %/ Þ/ @/ #to 2. Press %/ Þto move to “SEARCH,” then press SET3. Press %/ Þto move to “PERFORMER,” then press SET2. Press %/ Þto move to “SEARCH,” then press SET 3.Press %/ Þto move to “GENRE,” then press SET2. Press %/ Þto move to “TITLE INPUT,” then press SET7. Press %/ Þ/ @/ #to move to “DISC 32 characters5.Press %/ Þ/ @/ #to move to “DISC MICHAEL in this example,” then press SETCONNECTIONS 1: IR Signal Transmitter Connection AV COMPU LINK Remote Control SystemCONNECTIONS 2: AV COMPU LINK Connection One-TouchVideo Play CONNECTIONS 3: Video Cable ConnectionNotes Automatic Power On/Off StandbyAutomatic Power On One-TouchDVD PlaySound control section Amplifier Operating JVC’s Audio/Video ComponentsOperating Audio Components TunerCD recorder CD playerCD player-changer TurntableVCR VCR connected to the VCR 1 jacks Operating Video ComponentsDVD player 2.Press and hold TV/CATV/DBS STANDBY/ON Changing the Preset Signal CodesOperating Other Manufacturers’ Equipment 1.Set the TV operation mode selector to “TV.”buttons 1–9,and 3.Enter manufacturer’s code using buttons 1-9,and4. Enter manufacturer’s code using 1.Press and hold VCR STANDBY/ON 2.Press VCR1. Press and hold AUDIO ON. STANDBY ON 3. Enter manufacturer’s code using1.Press and hold VCR STANDBY/ON 2.Press DVD 4. Release AUDIO ONManufactures’ codes for DBS tuner selector to “LEARN.” Storing the Remote Signals Manually1. Set the LEARN/TRANSMIT MAIN ROOM/SUB ROOMNotes •Repeat steps 3 to 5 to store more signals in acontrol different remote mode source1. Set the LEARN/TRANSMIT 3. Press the desired buttonTo use the stored signals To erase the stored signalsPOSSIBLE CAUSE TroubleshootingPROBLEM SOLUTIONContinuous hissing or buzzing during FM reception 120 W per channel, min. RMS, driven into 8 Ω, SpecificationsAmplifier General Tuning RangeFM tuner IHF AM tunerDo not service the television yourself AccessoriesAuthorized Service Centers HOW TO LOCATE YOUR JVC SERVICE CENTERAUDIO-2 LIMITED WARRANTYWHAT YOU MUST DO FOR WARRANTY SERVICE WHAT IS NOT COVEREDVICTOR COMPANY OF JAPAN, LIMITED 0701NHMMDWJEIN
Top Page Image Contents