JVC RX-DP10VBK Receiving Radio Broadcasts, Tuning into Stations Manually, Press FM or AM, Notes

Page 34
 Receiving Radio Broadcasts
DOOR
DOWN

Tuning into Stations Manually1. Press FM or AM. Receiving Radio Broadcasts

You can browse through all the stations or use the preset function to go immediately to a particular station.

Indicates the functions YOU CAN ALSO USE when the receiver is ready for the sub-room operations.

Tuning into Stations Manually

On the unit:

FM

AM

IMPORTANT:

Check to see if the following before or while using the buttons and controls.

For the main room operations:

The MAIN ROOM ON/OFF lamp on the unit is lit .

For the sub-room operations:

The SUB ROOM ON/OFF lamp on the unit is lit.

When using the unit:

For the main room operations: “SUB ROOM” is not shown in the main display.

For the sub-room operations: “SUB ROOM” is shown in the main display.

– Press DOOR DOWN to use the buttons inside the front door.

To close the front door, press DOOR UP.

When using the remote control:

When operating the receiver using the remote control, the display on the unit always shows the main room source information though you are operating it for the sub-room source.

Set the MAIN ROOM/SUB ROOM (LEARN/TRANSMIT) selector to “MAIN ROOM” or “SUB ROOM” correctly.

Check the indication shown on the remote’s display when you press a button—this indicates the remote control operation mode together with multi-room operation mode (either MAIN ROOM or SUB ROOM) for a while (10 or 5 seconds).

LEARN TRANSMIT

 

LEARN TRANSMIT

 

MAIN ROOM SUB ROOM

MAIN ROOM SUB ROOM

LEARN

TRANSMIT

 

LEARN TRANSMIT

 

 

 

 

 

 

STANDBY

ON

 

STANDBY

ON

 

 

 

 

MAIN ROOM SUB ROOM

 

MAIN ROOM SUB ROOM

 

MAIN ROOM

SUB ROOM TV/CATV/DBS

VCR 1

 

MAIN ROOM

SUB ROOM TV/CATV/DBS

VCR 1

 

 

 

ON/OFF

ON/OFF

 

ON/OFF

ON/OFF

 

 

 

 

 

 

STANDBY/ON STANDBY/ON

 

STANDBY/ON

STANDBY/ON

 

 

 

 

MAIN ROOM

SUB ROOM

Ex. When you press FM

Ex. When you press FM

with MAIN ROOM/SUB

with MAIN ROOM/SUB

ROOM (LEARN/

ROOM (LEARN/

TRANSMIT) selector

TRANSMIT) selector

set to “MAIN ROOM.”

set to “SUB ROOM.”

 

 

1. Press FM or AM.

The last received station is tuned in.

When operating for the main room

 

ANALOG

SPEAKERS

1

 

L R

 

 

 

 

SUBWFR

 

VOLUME

 

 

 

dB

 

 

 

 

When operating for the sub-room

 

 

 

 

 

 

 

 

SPEAKERS

1 SUB ROOM

 

 

 

VOLUME

 

 

 

dB

 

 

 

 

2. Press UP or DOWN (inside

 

 

DOWN

UP

 

the front door) until you find

 

 

 

 

 

 

the frequency you want.

 

 

Pressing UP increases the frequencies.

Pressing DOWN decreases the frequencies.

From the remote control:

1. Press FM or AM.

FM

AM

The last received station is tuned in.

2.Press TUNING UP or TUNING

DOWN until you find the frequency you want.

Pressing TUNING UP increases the frequencies.

Pressing TUNING DOWN decreases the frequencies.

/ REW

PLAY

FF/

DOWN

TUNING

UP

Notes:

When a station of sufficient signal strength is tuned in, the TUNED indicator lights up on the display.

When an FM stereo program is received, the STEREO indicator also lights up.

When you hold the button (and release it) in step 2, the frequency keeps changing until a station is tuned in.

You can only select the same station of the same band (FM or AM) both for the main room and sub-room operations. If you change the station for the sub-room, it also changes for the main room (and vice versa: indications in the main display also change). This also means that if you change the station for the sub-room while recording a broadcasting program in the main room, recording in the main room will be interrupted.

31

Image 34
Contents INSTRUCTIONS RX-DP10VBKAUDIO/VIDEO CONTROL RECEIVER LVT0722-003AWarnings, Cautions and Others Caution ––STANDBY/ON switchCaution––SPEAKERLOAD SELECTOR switch WARNING: TO REDUCE THE RISK OF FIRENote to CATV system installer For the remote controlFor the main unit Sound Adjustments Table of ContentsBasic Settings Using the Surround ModesIntroduction FeaturesPrecautions RF/IR multi-brand/learningremote controlParts Identification Refer to the pages in parentheses for details Front PanelDisplay Window 1SPEAKERS 1 button 18,12 3 Checking the Supplied Accessories Before InstallationConnecting the FM and AM Antennas Getting StartedNotes Connecting the SpeakersAM Antenna Connections Main room speaker layout4Turn the knob clockwise 3Insert the speaker signal cable2Turn the knob counterclockwise Basic connecting procedureConnecting Audio/Video Components Power amplifierPower amplifier Power amplifier Power amplifierCassette deck or MD recorder CD playerCD recorder R DVD LVCRs Video component connectionsVideo camera DBS tuner TV and/or DBS tunerNotes DVD player Digital input terminals Digital ConnectionsDigital output terminal 1. Find the place where you attach the IR signal Setting Up the RF Rod AntennaSetting Up the IR Signal Transmitter to the IR signal transmitter2.Insert the batteries Putting Batteries in the Remote ControlConnecting the Power Cord 3.Replace the coverPower amplifier Multi-RoomOperationsRequired Connections for Sub-Room Sub-roomLayout1. Set MAIN ROOM/SUB ROOM Basic Operating Procedure for Main Room1. Press STANDBY/ON LEARN/TRANSMIT selector toadjust the volume level of the Basic Operating Procedure for Sub-Room6. Turn MASTER VOLUME to 4. Press VOLUME +/– to adjust theFrom the remote control Turning the Power On and Off StandbyMain Room Operations To turn on the power, pressSUBWFR Canceling the Main Room OperationsSelecting the Main Room Source to Play Speaker and signal indicators on the display1. Press SOUND SELECTOR inside Adjusting the Main Room VolumeSUBWFR LFE as the VCR or DVD player, etcActivating the Main Room Front Speakers Selecting the Analog or Digital Input ModePress and hold INPUT MODE/INPUT INPUT MODE Attenuating the Input Signalheadphones connected Muting the Main Room SoundMaking Sounds Natural Changing the Display BrightnessPress DIMMER Turning Line Direct On and OffBasic adjustment auto memory Using the Sleep TimerPress SLEEP repeatedly From the remote control ONLY2. Press SUB ROOM ON/OFF so that Sub-RoomOperationsand Selecting the Sub-RoomOperations the SUB ROOM ON/OFF lamp lightsFrom the remote control Canceling the Sub-RoomOperations“SUB ROOM.” From the remote controlFrom the remote control Adjusting the Sub-RoomVolumeSelecting the Sub-RoomSource to Play On the unitactivate the sub-roomfront speakers Activating the Sub-RoomFront SpeakersPress SPEAKERS 2/SUB ROOM to Muting the Sub-RoomSoundReceiving Radio Broadcasts Tuning into Stations Manually2.Press TUNING UP or TUNING 1. Press FM or AM3. Press RIGHT or LEFT inside Using Preset Tuning2. Press SET inside the front door the front door to select aBasic Settings Setup Menu ConfigurationMenu operation buttons Operation through On-ScreenDisplay MenusFrom the remote control For the main room operations3. Press SET Menu Operating Procedure1. Press SETUP MENU repeatedly to select an itemLSB RSB Setting the Speakers —SPEAKERSETTINGSetting the Speaker Distance —SPEAKERDISTANCE 7For subwoofer7Setting the low frequency effect attenuator LFE Setting the Bass Sounds—SUBWOOFER37Setting the crossover frequency 7Changing the sound phase7Setting the Midnight mode Setting the Dynamic Range —DYNAMICRANGESetting the Digital Input Terminals -DIGITALIN 7Setting THX Surround EXWhen “COAXIAL INPUT” is set to “CD” Turning On and Off the Video Output —VIDEOPOWERWhen “COAXIAL INPUT” is set to “DVD” When “COAXIAL INPUT” is set to “TV” or “DBS”Preparing for the Sub-RoomOperations —SUBROOM p Sound Adjustments Adjustment Menu ConfigurationMenu operation buttons From the remote controlOperation through On-ScreenDisplay Menus For the main room operations3. Press SET 1. Press ADJUST MENUMenu Operating Procedure repeatedly to select an item7Adjustment procedure on this submenu Adjusting the Parametric Equalizer —PARAMETRICEQ7Adjusting the speaker channel output levels Notes7 Adjustment procedure on this submenu Adjusting the DSP Parameters —DSPPARAMETERAdjusting the Center Channel —CENTERCHANNEL 7Adjustment screenIntroducing the Surround Modes Using the Surround ModesReproducing Theater Ambience THX Surround EX Dolby Digital EXDolby Surround Dolby Pro Logic Surround modes available for input signalsInput Signals DTS Digital SurroundActivating the Surround Modes 1.Select and play any sound source2. Press TEST once to check the speaker Adjusting the Surround Sounds Temporarily1. Press SOUND output balanceIntroducing the DSP Modes Using the DSP ModesReproducing the Sound Field DAP modesyou want appears on the display Activating the DSP Modes2.Press DSP MODE repeatedly until the DSP mode 1.Select and play any sound source3. Press ROOM SIZE to adjust the room Adjusting the DSP Parameters Temporarily2. Press EFFECT to adjust the overall 4. Press LIVENESS to adjust theUsing the DVD MULTI Playback Mode Activating the DVD MULTI Playback ModeAutomatic Source Selection COMPU LINK Remote Control SystemNotes For the main room operationsthe same time 3. Press the play 3 button on the CD playerCONNECTIONS TEXT COMPU LINK Remote Control SystemFUNCTIONS To exit from the Disc information screen OPERATIONSDisc Information screen Note onthen press SET 2. Press %/ Þto move to “SEARCH,” then press SET3. Press %/ Þto move to “PERFORMER,” 4. Press %/ Þ/ @/ #toto “TITLE INPUT,” then press SET 3.Press %/ Þto move to “GENRE,” then press SET2. Press %/ Þto move 2. Press %/ Þto move to “SEARCH,” then press SETMICHAEL in this example,” then press SET 32 characters5.Press %/ Þ/ @/ #to move to “DISC 7. Press %/ Þ/ @/ #to move to “DISCCONNECTIONS 1: IR Signal Transmitter Connection AV COMPU LINK Remote Control SystemCONNECTIONS 2: AV COMPU LINK Connection CONNECTIONS 3: Video Cable Connection One-TouchVideo PlayOne-TouchDVD Play Automatic Power On/Off StandbyAutomatic Power On NotesTuner Operating JVC’s Audio/Video ComponentsOperating Audio Components Sound control section AmplifierTurntable CD playerCD player-changer CD recorderVCR VCR connected to the VCR 1 jacks Operating Video ComponentsDVD player 1.Set the TV operation mode selector to “TV.” Changing the Preset Signal CodesOperating Other Manufacturers’ Equipment 2.Press and hold TV/CATV/DBS STANDBY/ON1.Press and hold VCR STANDBY/ON 2.Press VCR 3.Enter manufacturer’s code using buttons 1-9,and4. Enter manufacturer’s code using buttons 1–9,and4. Release AUDIO ON 3. Enter manufacturer’s code using1.Press and hold VCR STANDBY/ON 2.Press DVD 1. Press and hold AUDIO ON. STANDBY ONManufactures’ codes for DBS tuner MAIN ROOM/SUB ROOM Storing the Remote Signals Manually1. Set the LEARN/TRANSMIT selector to “LEARN.”different remote mode source •Repeat steps 3 to 5 to store more signals in acontrol NotesTo erase the stored signals 3. Press the desired buttonTo use the stored signals 1. Set the LEARN/TRANSMITSOLUTION TroubleshootingPROBLEM POSSIBLE CAUSEContinuous hissing or buzzing during FM reception 120 W per channel, min. RMS, driven into 8 Ω, SpecificationsAmplifier AM tuner Tuning RangeFM tuner IHF GeneralHOW TO LOCATE YOUR JVC SERVICE CENTER AccessoriesAuthorized Service Centers Do not service the television yourselfWHAT IS NOT COVERED LIMITED WARRANTYWHAT YOU MUST DO FOR WARRANTY SERVICE AUDIO-20701NHMMDWJEIN VICTOR COMPANY OF JAPAN, LIMITED