14.Insert a 2” Round Inner Cap (101) into the end of a Butterfly Arm (10).
Attach a Butterfly Handle (53) to the Butterfly Arm
(10)with two 3/8” x 1” Bolts (84) and two 3/8” Washers (48).
Repeat this step with the other Butterfly Arm (10).
15.Lubricate a 3/8” x 3 1/4” Bolt (62). Attach the left Butterfly Arm (10) to the Left Pivot Arm (71) with the Bolt and a 3/8” Nylon Locknut (50).
Repeat this step with the right Butterfly Arm (not shown) and the Right Pivot Arm (85).
16.Lubricate a 1/2” x 4” Bolt (68). Attach the Press Frame (8) to the Press Base (6) with the Bolt and a 1/2” Nylon Jamnut (36).Note: Do not over tighten the 1/2” Nylon Jamnut; the Press Frame must be able to pivot easily.
17.Insert a 2” Round Inner Cap (101) into the top of a Press Arm (77). Press two 1” Round Inner Caps
(86)into the outside ends of the handles.
Attach the Press Arm (77) to the Press Frame (8) with two 5/16” x 2 3/4” Bolts (96) and two 5/16” Nylon Locknuts (64).
Repeat this step with the other Press Arm (77).
10
14 |
|
|
|
|
|
| 10 |
10 | 48 | 48 | 53 |
|
|
| |
53 | 84 |
|
|
|
|
| |
| 48 | 48 | 101 |
|
| ||
| 101 |
|
|
15 |
| 50 |
|
|
|
| |
|
|
| 10 |
85 | 71 |
|
|
Lubricate 62 |
| ||
|
| ||
16 |
|
|
|
8 |
|
|
|
| 68 |
|
|
|
| 6 |
|
|
| 36 |
|
| Lubricate |
|
|
17 |
| 101 |
|
Handles |
| 86 | |
|
|
| |
|
| 64 |
|
96 |
| 77 |
|
| 8 |
|
|