ProForm PFSY59001 user manual

Page 15

34.Wrap the Weight Cable (72) around a 3 1/2” Pulley (24). Attach the Pulley and a Cable Trap (25) to the Butterfly Upright (1) with a 3/8” x 4 3/4” Bolt (60), a 3/8” Washer (48), and a 3/8” Nylon Jamnut (63).Be sure that the Cable Trap is turned to hold the Cable in place.

35.Wrap the Weight Cable (72) around a 3 1/2” Pulley (24). Attach the Pulley and a Cable Trap (25) between the lowest holes of the Adjustable Pulley Plates (23) hanging from the Butterfly Cable (73) with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut (50). Be sure that the Cable Trap is turned to hold the Cable in place.

36.Wrap the Weight Cable (72) around a 3 1/2” Pulley (24). Attach the Pulley and a Cable Trap (25) to the bracket on the Butterfly Base (4) with a 3/8” x 1 3/4” Bolt (57) and a 3/8” Nylon Jamnut (63).Be sure that the Cable Trap is turned to hold the Cable in place.

37.Note: For convenience, the weights assembled in step 8 are not shown in the following draw- ings.

Wrap the Weight Cable (72) around a 3 1/2” Pulley (24). Attach the Pulley and a Cable Trap (25) to the bracket on the Butterfly Base (4) with a 3/8” x 1 3/4” Bolt (57) and a 3/8” Nylon Jamnut (63).Be sure that the Cable Trap is turned to hold the Cable in place.

15

34

1

 

 

 

 

60

 

 

24

 

 

25

 

 

72

 

48

 

63

 

 

35

73

 

 

54

 

 

23

 

 

25

50

 

 

 

24

 

 

72

 

36

 

 

 

25

57

 

Bracket

 

 

24

 

 

72

 

 

63

 

 

4

 

37

 

 

 

72

 

 

25 57

 

 

63

 

 

24

 

 

Bracket

 

 

4

 

Image 15
Contents QUESTIONS? Model No. PFSY59001 Serial NoCustomer HOT Line Table of Contents Important Precautions Decal Before YOU BeginMake Assembly Easier AssemblyFrame Assembly Do not tighten the Nylon Locknuts 50 yet Do not tighten the Nylon Locknuts yet Tighten the Nylon Locknuts 50 used in steps Locate and open the parts bag labeled ARM AssemblyPage Cable Assembly Page Page Weight Cable is in the groove of the Pulley Page Page Page Cable Trap is oriented to hold the Cable in place Locate and open the parts bag labeled Seat Assembly Seat AssemblyPage Adjustments Changing the Weight SettingAttaching the LAT BAR or AB Strap to High Pulley Station Adjusting the Backrest Adjusting the Curl PADAttaching the AB Strap to the AB Pulley Station Plates Weight Resistance ChartTightening the Cables TROUBLE-SHOOTING and MaintenanceLeft Arm Cable DiagramsLeg Press Cable Press Upright Ab Cable Butterfly CableWeight Cable Cable ID Stack Low Pulley R0402A Part Identification CHART-Model No. PFSY59001X 4 Bolt X 5 1/2 Bolt X 6 Bolt 2 x 2 1/2 Inner Cap 2 Square Inner Cap Round Inner Cap Key No. Qty Description Part LIST-Model No. PFSY59001Exploded Ordering Replacement Parts Limited WarrantyIcon Health & FITNESS, INC., 1500 S W., LOGAN, UT