22.Remove the preassembled 3/8” x 2” Bolts (54) from one set of Adjustable Pulley Plates (23).
Wrap the Butterfly Cable (73) around a 3 1/2” Pulley (24). Attach the Pulley and a Cable Trap (25) between the top holes of the Adjustable Pulley Plates (23) with a 3/8” x 2” Bolt (54) and a 3/8” Nylon Locknut (50). Be sure that the Cable Trap is turned to hold the Cable in place.
23.Wrap the Butterfly Cable (73) around a
24.Attach the Butterfly Cable (73) to the Left Pivot Arm (71) with a 5/16” x 2 1/4” Shoulder Bolt (79) and a 5/16” Nylon Jamnut (105).
25.Locate the Ab Cable (47). Insert the Ab Cable up through the Press Top Frame (9) and wrap it around a 3 1/2” Pulley (24).
Slide a 3/8” Washer (48) and a 5/8” x 3/4” Bushing
(66)onto a 3/8” x 3 1/4” Bolt (62). Slide the Bolt through the Press Top Frame (9) and the 3 1/2” Pulley (24). Secure another 5/8” x 3/4” Bushing and 3/8” Washer to the Bolt with a 3/8” Nylon Locknut
12
22 |
|
54 | 24 |
25 | |
| 73 |
| 50 |
23 | |
23 | 87 |
| |
32 |
|
50 | 27 |
| |
| 73 |
| 1 |
24 |
|
73 | 79 |
| |
| 71 |
| 105 |
25 |
|
66 |
|
24 | 9 |
62 |
|
48 |
|
48 | 50 |
47 |
|