THE INFORMATION MODE
The console features an information mode that keeps track of the total number of hours that the treadmill has been used and the total distance that the walking belt has moved. The information mode also allows you to select miles or kilometers as the unit of measurement and to turn on and turn off the display demo mode.
To select the information mode, hold down the Stop button while inserting the key into the console and then release the Stop button. When the information mode is selected, the following information will be shown:
The Time display will show the total number of hours the treadmill has been used.
The Distance/Incline dis- play will show the total number of miles (or kilome- ters) that the walking belt has moved.
An M for metric kilometers or an E for English miles will appear in the Calories/Pulse display. Press the Speed increase button to change the unit of measurement if desired. The console features a dis- play demo mode, designed to be used if the treadmill is displayed in a store. While the demo mode is turned on, the console will function
normally when you plug in the power cord, press the power switch into the reset position, and insert the key into the console. However, when you remove the key, the displays will remain lit, although the buttons will not function. If the demo mode is turned on, a “d” will ap- pear in the Speed display while the information mode is selected. To turn on or turn off the display demo mode, press the Speed decrease button.
To exit the information mode, remove the key from the console.
HOW TO USE THE STEREO SOUND SYSTEM
To play music or audio books through the consoleʼs stereo speakers, you must connect your MP3 player, CD player, or other personal audio player to the con- sole through the audio jack.
To use the audio jack, locate the audio wire and plug it into the audio jack near the iFit slot. Then, plug the audio wire into a jack on your MP3 player, CD player, or other personal audio player. Make sure that the audio wire is fully plugged in.
Next, press the Play button on your MP3 player, CD player, or other personal audio player. Adjust the vol- ume on your personal audio player or press the Volume increase
and decrease buttons on the console.
If you are using a personal CD player and the CD skips, set the CD player on the floor or another flat sur- face instead of on the console.
23