1. Make sure that the power cord is unplugged. | 1 |
|
|
|
|
Remove the 3/8" Nut (10), the 3/8" x 2" Bolt (8), |
|
|
|
|
|
and the shipping bracket (A) from the Base (95). |
|
|
|
|
|
Repeat this step on the other side of the |
|
|
|
|
|
treadmill. |
|
|
|
|
|
The 3/8" Nuts (10) and the 3/8" x 2" Bolts (8) will |
|
|
|
|
|
be used in assembly steps 3 and 6. Discard the |
|
|
|
|
|
shipping brackets. |
|
|
|
|
|
|
|
|
| 95 |
|
| 10 |
| 8 A |
|
|
|
|
|
|
| |
2. With the help of a second person, carefully tip | 2 |
| C |
|
|
the treadmill onto its left side. Partially fold the |
|
|
| ||
Frame (55) so that the treadmill is more stable; |
|
|
| B |
|
do not fully fold the Frame yet. |
|
| Hole |
| |
Remove and discard the two indicated bolts (B) |
|
|
|
| |
|
| 87 | 90 |
| |
and the shipping bracket (C). |
|
|
| ||
Cut the shipping tie securing the Upright Wire |
|
|
|
|
|
(87) to the Base (95). Locate a plastic tie in the |
|
|
| 5 |
|
indicated hole in the Base, and use the tie to pull |
|
|
|
| |
the Upright Wire out of the hole. |
| 94 |
| 95 |
|
Attach two Base Feet (90) to the Base (95) in the |
|
|
|
| |
locations shown with two #8 x 1" Tek Screws (5) | 55 | 90 | 5 |
|
|
and two Base Foot Spacers (94). |
|
| |||
Then, attach the other two Base Feet (90) with |
|
|
| 90 |
|
two #8 x 1" Tek Screws (5). |
|
|
| 5 | |
|
|
|
|
| |
|
| 94 | 905 |
|
|
| 7 |
|
|
|
|