6.With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (55) so that the treadmill is more stable; do not fully fold the Frame yet.
Remove and discard the two indicated bolts (B) and the shipping bracket (C).
Attach a Wheel (96) to the Base (95) with the 3/8" x 2" Bolt (8) and the 3/8" Nut (10) that you removed in step 1. Do not overtighten the Nut; the Wheel must turn freely.
Press a Base Cap (89) into the Base (95).
7.Hold the Left Upright (84) against the Base (95). Insert two 3/8" x 4" Patch Bolts (7) and a 3/8" x 1 1/2" Patch Bolt (3) with three 3/8" Star Washers (11) into the Left Upright.
Tighten the 3/8" x 4" Patch Bolts (7) and the 3/8" x 1 1/2" Patch Bolt (3) until the heads of the Patch Bolts touch the Left Upright (84); do not fully tighten the Patch Bolts yet.
With the help of a second person, tip the tread- mill so that the Base (95) is flat on the floor.
6 | C |
|
|
|
B |
|
|
| |
|
|
|
| |
89 |
|
| 8 | 55 |
|
|
| ||
|
|
|
| |
| 95 | 96 | 10 |
|
|
|
| ||
7 |
|
|
|
|
7 | 3 |
| 84 |
|
11 | 11 |
|
|
|
|
|
|
| |
95 |
|
|
|
|
9