ResMed S9 VPAP Tx manual S9 Vpap Tx basics, Key Function

Page 10

S9 VPAP Tx basics

Info menu button

LCD screen

Start/Stop button

Setup menu button	Alarm mute	Alarm and
	button	therapy LEDs
Push dial

		Key	Function
		Start/Stop button	Starts or stops treatment.
			Starts or stops treatment.
			Power Save mode—hold for three seconds.
			Power Save mode—hold for three seconds.
		Info menu button	Allows you to view the device service information or to exit from
		Info menu button	the menu.
			the menu.
		Setup menu button	Allows you to make changes to settings or to exit from the menu.
		Setup menu button
			Turning the dial allows you to scroll through the menu and change
		Push dial	settings. Pushing the dial allows you to enter into a menu and
			confirm your choice.
			Press once to mute alarms. Press a second time to un-mute. If
		Alarm mute button	the problem is still present, the alarm will sound again after two
			minutes.
			Displays the menus, treatment screens and reminders.
		LCD screen	Backlight—when treatment is being delivered, the backlight
		LCD screen	(including the Start/Stop button) automatically turns off after

			30 seconds, otherwise it turns off after 3 minutes.
		Alarm LED	Yellow LED—flashes during an alarm.

		Therapy LED	Blue LED—always on during therapy (if enabled in the Options
		Therapy LED	menu).
			menu).

6

Image 10

Contents S9 Vpap Tx Page S9 Vpap Tx Contents General warnings and cautions S9 Vpap Tx contraindications WelcomeS9 Vpap Tx indications for use S9 Vpap Tx adverse effectsS9 Vpap Tx at a glance Antibacterial filters MasksSupplemental oxygen HumidifierTherapy mode Description Therapy modesS9 Vpap Tx basics Key FunctionSetting up the S9 Vpap Tx Filling the water tub English Mask type Settings Mask and air tubing settingsAir tubing Specifications Settings About the menus Navigating the menusHome menu Climate Control Changing settings via the Home menuHumidity level Mask FitViewing the treatment screens Treatment screen parameters Parameter Modes DescriptionSettings Setup menuSetup menu access ConfigurationRange Description Clinical setup menu parametersParameter Modes Ü ü ü ü ü ü ü üParameter Modes Range Description Ü ü üLED Info menu ServiceParameter Description Mode TemperatureManaging Climate Control Heated tubeDelivering therapy Adding supplemental oxygen To add supplemental oxygenCleaning and maintenance Filter EfficiencyAlarms menu Working with alarmsTesting the alarms No display TroubleshootingProblem/Possible cause Solution Insufficient air delivered from the deviceLeaking water tub Alarm is activated and the LCD screen display disappearsWater splashing on your face from the H5i Air feels too warm/cold in the maskGeneral technical specifications Technical specificationsS9 Vpap Tx technical specifications Pneumatic flow path Displayed values Value Range Display resolutionFlow maximum at set pressures MinSymbols ServicingLimited warranty ProductPage GLO Multi