ResMed S9 VPAP Tx Masks, Supplemental oxygen, Antibacterial filters, Humidifier, USB Adapter

Page 8

Masks

Mask systems recommended for use with the S9 VPAP Tx can be found at www.resmed.com. For information on using a mask refer to the mask user guide.

For a complete list of recommended masks and their settings go to www.resmed.com on the Products page under Service & Support. If you do not have internet access, please contact your ResMed representative.

CAUTION

Non-vented masks should not be used with the device.

Supplemental oxygen

Supplemental oxygen can be used with the S9 VPAP Tx. For more information, see “Adding supplemental oxygen” on page 22.

Antibacterial filters

Antibacterial filters increase resistance in the air circuit and may affect accuracy of displayed and delivered pressure, particularly at high flows. ResMed has tested and recommends using an antibacterial filter with a low impedance (eg, 2 cm H2O at 60 L/min).

Humidifier

The S9 VPAP Tx is compatible with the H5i heated humidifier. For further information on using this humidifier refer to the H5i user guide.

USB Adapter

The S9 USB Adapter is designed for use with the S9 VPAP Tx. The USB adapter connects the S9 VPAP Tx to a personal computer via Tx Link for remote monitoring and control. For further information on using this adapter refer to the S9 USB Adapter user guide.

Climate Control

The S9 VPAP Tx, when used in conjunction with the H5i and ClimateLine or ClimateLineMAX heated air tubing, offers a feature called Climate Control.

Climate Control enables the automatic delivery of a constant value of absolute humidity to the patient’s upper airway while protecting against rainout and allowing patients to select the air temperature that offers the most comfort for them.

4

Image 8
Contents S9 Vpap Tx Page S9 Vpap Tx Contents General warnings and cautions Welcome S9 Vpap Tx indications for useS9 Vpap Tx contraindications S9 Vpap Tx adverse effectsS9 Vpap Tx at a glance Masks Supplemental oxygenAntibacterial filters HumidifierTherapy mode Description Therapy modesS9 Vpap Tx basics Key FunctionSetting up the S9 Vpap Tx Filling the water tub English Air tubing Specifications Settings Mask and air tubing settingsMask type Settings Home menu Navigating the menusAbout the menus Changing settings via the Home menu Humidity levelClimate Control Mask FitViewing the treatment screens Treatment screen parameters Parameter Modes DescriptionSetup menu Setup menu accessSettings ConfigurationClinical setup menu parameters Parameter ModesRange Description Ü ü ü ü ü ü ü üParameter Modes Range Description Ü ü üLED Parameter Description ServiceInfo menu Temperature Managing Climate ControlMode Heated tubeDelivering therapy Adding supplemental oxygen To add supplemental oxygenCleaning and maintenance Filter EfficiencyTesting the alarms Working with alarmsAlarms menu Troubleshooting Problem/Possible cause SolutionNo display Insufficient air delivered from the deviceAlarm is activated and the LCD screen display disappears Water splashing on your face from the H5iLeaking water tub Air feels too warm/cold in the maskS9 Vpap Tx technical specifications Technical specificationsGeneral technical specifications Pneumatic flow path Value Range Display resolution Flow maximum at set pressuresDisplayed values MinSymbols ServicingLimited warranty ProductPage GLO Multi