ResMed S9 VPAP Tx manual Managing Climate Control, Mode, Temperature, Heated tube

Page 24

Managing Climate Control

Designed to be ideal for most patients, Climate Control Auto enables the automatic delivery of a constant value of absolute humidity while protecting against rainout.

To allow for increased flexibility, Climate Control can be turned to Manual in the Setup menu. Setting Climate Control to Manual disables the automatic control of humidity and allows humidity and temperature levels to be set independently. However, rainout protection is not provided when Climate Control is set to Manual.

	Mode	Humidity			Temperature
	Mode	Setting range	Default settings		Setting range	Default settings
		Setting range	Default settings		Setting range	Default settings
	Climate Control – Auto			Climate Control
		Constant		–	Off*, 60ºF–86ºF	80ºF (27ºC)
		absolute humidity			(16ºC–30ºC)
		(depending on
		temperature
		setting)
	Climate Control –	Humidity level			Heated tube
	Manual	Off–6.0		3	Off, 60ºF–86ºF	80ºF (27ºC)
		Off–6.0		3	Off, 60ºF–86ºF	80ºF (27ºC)
		(0.5 increments)			(16ºC–30ºC)

*When the temperature setting is set to Off the tube will not heat the air, nor will the humidifier heat the water to add humidity to the air.

20

Image 24

Contents S9 Vpap Tx Page S9 Vpap Tx Contents General warnings and cautions Welcome S9 Vpap Tx indications for useS9 Vpap Tx contraindications S9 Vpap Tx adverse effectsS9 Vpap Tx at a glance Masks Supplemental oxygenAntibacterial filters HumidifierTherapy mode Description Therapy modesS9 Vpap Tx basics Key FunctionSetting up the S9 Vpap Tx Filling the water tub English Mask and air tubing settings Mask type SettingsAir tubing Specifications Settings Navigating the menus About the menusHome menu Changing settings via the Home menu Humidity levelClimate Control Mask FitViewing the treatment screens Treatment screen parameters Parameter Modes DescriptionSetup menu Setup menu accessSettings ConfigurationClinical setup menu parameters Parameter ModesRange Description Ü ü ü ü ü ü ü üParameter Modes Range Description Ü ü üLED Service Info menuParameter Description Temperature Managing Climate ControlMode Heated tubeDelivering therapy Adding supplemental oxygen To add supplemental oxygenCleaning and maintenance Filter EfficiencyWorking with alarms Alarms menuTesting the alarms Troubleshooting Problem/Possible cause SolutionNo display Insufficient air delivered from the deviceAlarm is activated and the LCD screen display disappears Water splashing on your face from the H5iLeaking water tub Air feels too warm/cold in the maskTechnical specifications General technical specificationsS9 Vpap Tx technical specifications Pneumatic flow path Value Range Display resolution Flow maximum at set pressuresDisplayed values MinSymbols ServicingLimited warranty ProductPage GLO Multi