PART IDENTIFICATION | R1103A |
Refer to the drawings below to identify small parts used in assembly. The number in parentheses by each draw- ing is the key number of the part, from the PART LIST in the center of this manual. Important: Some parts may have been
| M8 x 12mm Shoulder |
M10 Nylon Locknut (97) | Bolt (131) |
M10 Washer (99)
1/4" x 9.5mm Allen
Head Set Screw (120)
M8 Nylon Locknut (96)
M8 Washer (100)
M6 Nylon Locknut (124)
M6 Washer (101)
25mm Round Angled Cap (62)
25mm Square Inner Cap (31)
25mm Round Outer Cap (94)
25mm Round Inner Cap (26)
25mm Retainer Ring (93) | 32mm Square Inner Cap (66) |
|