ProForm PFANSY9825.1 user manual Finger Guards are oriented as shown

Page 13

23.Wrap the Press Cable (109) around a 90mm Pulley (63). Attach the Pulley, two Half Finger Guards (66), a Cable Trap (68), and an M10 Washer (99) to the Left Seat Frame (27) with an M10 x 103mm Bolt (22) and an M10 Nylon Locknut (90). Make sure the Cable Trap and the

Finger Guards are oriented as shown.

24.Wrap the Press Cable (109) around a “V”-pulley (62). Attach the “V”-pulley, two Half Finger Guards (66), and two M10 Washers (99) to the Leg Press Frame (28) with an M10 x 115mm Bolt (71) and an M10 Nylon Locknut (90). Make sure the

Finger Guards are oriented as shown.

25.Wrap the Press Cable (109) around a 90mm Pulley (63). Attach the Pulley, two Half Finger Guards (66), a Cable Trap (68), and an M10 Washer (99) to the Left Upright (26) with an M10 x 108mm Bolt (72) and an M10 Nylon Locknut (90). Make sure the Cable Trap and Finger

Guards are oriented as shown.

26.Wrap the Press Cable (109) around a 90mm Pulley (63). Attach the Pulley, two Half Finger Guards (66), a Cable Trap (68), and an M10 Washer (99) to the Press Frame (29) with an M10 x 135mm Bolt (70). Make sure the Cable Trap and Finger Guards are oriented as shown.

23

 

 

 

 

 

27

90

 

 

 

63

 

 

 

66

 

66 109

 

22

99

 

68

 

 

 

24

 

 

 

 

 

28

 

 

 

90

 

 

 

109

 

 

 

62

66

71

 

 

99

 

99

 

 

 

 

 

 

66

 

25

 

 

 

 

26

 

63

99

 

 

68

 

66

 

90

 

72

 

 

 

 

66

 

109

 

 

 

 

26

 

 

 

109

 

29

 

 

66

 

66

 

70

 

99

 

63

 

 

 

 

 

68

 

 

13

Image 13
Contents Model No. PFANSY9825.1 Serial No QUESTIONS?Table of Contents Important Precautions Right Side Before YOU BeginLeft Side Assembly Frame Assembly Page Page Repeat this step with the other Weight Guide Weight Tube sits in the groove in the top WeightLocknuts yet Arm AssemblyTighten the M8 Nylon Locknuts 91 used in steps Repeat this step with the Right Butterfly ArmRepeat this step with the other Press Arm Cable Assembly Guards are oriented as shown Finger Guards are oriented as shownTrap and Finger Guards are oriented as Shown Cable Trap and Finger Guards are oriented asMake sure the Finger Guards are oriented as Shown Page 106 Flat Edge 108 103 110 102 110 Over the rod in the Seat Frame Identify the Ab Cable 107. Route the small ball107 Is inserted through both Finger Guards and is Over the Cable Seat AssemblyPage Repeat this step with the Leg Lever 4 and the Short Pad Tube Changing the Weight Setting AdjustmentsAttaching the Accessories to a Pulley Station Using the Lock PlateLocking the Weight Stack Adjusting the BackrestLbs Weight Resistance ChartButterfly Cable Cable DiagramsShort Cable Ab CablePress Cable Weight CableTightening the Cables MaintenanceExercise Guidelines Cooling Down Muscle ChartStaying Motivated Date Exercise Weight Sets RepsAerobic Exercise Thursday Aerobic Exercise DateSave this Part Identification Chart for Future Reference Part Identification CHART-Model No. PFANSY9825.1 Page Qty Description Part LIST-Model No. PFANSY9825.1Save this Part LIST/EXPLODED Drawing for Future Reference Exploded Drawing A-Model No. PFANSY9825.1 Exploded Drawing B-Model No. PFANSY9825.1 Ordering Replacement Parts