JVC UX-A70MDR manual To record a single track during play or pause, Press AUX

Page 36

4 Press REC.

The recording starts.

The track number on the MD is flashing while recording.

TRACK	1
SP LP2	LP4	Flashing

MDCD

NORMAL SPEED REC

Elapsed playing

time

The now recorded track number

Recording length and speed

Ex. The track 4 of a CD is now recorded on the track 1 of an MD with MODE 2 (LP2, NORMAL SPEED REC) selected.

After the recording, both the CD player and the MD recorder stop automatically.

To stop recording, press 7.

“UTOCwriting” flashes for a while.

To record a single track during play or pause

While playing back or pausing a CD track you want to record, perform steps 3 and 4.

The playback of that CD track is stopped, and the same track starts playing from the beginning again. This time, the MD recorder starts recording the CD track.

•When the track is recorded, both the CD player and the MD recorder stop.

When recording from a CD

Two track marks may be recorded at the beginning of the recording. If this occurs, join these two track marks using the JOIN function described on page 35.

Recording the External Equipment

— Sound Synchronized Recording

With this recording method, you can start recording automatically when the source sound comes into this unit through the LINE IN jacks.

Sound synchronized Recording will stop automatically if no sound comes into for more than 30 seconds.

You have three methods (MODE 1 – 3) to record from the external equipment onto an MD.

	Recording	Recording	Recording Speed
	mode	length mode*	Recording Speed
	mode	length mode*

	MODE 1	SP	NORMAL SPEED REC

	MODE 2	LP2	NORMAL SPEED REC

	MODE 3	LP4	NORMAL SPEED REC

*For the recording length mode, see “Stereo Long-Hour Recording (MDLP)” on page 30.

On the main unit ONLY:

1 Insert a recordable MD into the MD loading slot.

• If the MD playback starts, press 7to stop it.

2 Press AUX.

The source is changed to “AUX.”

3 Press REC MODE to select the recording mode.

•Each time you press the button, the recording modes change as follows:

MODE 1 MODE 2

AUX		MODE 3
(canceled)		MODE 3
(canceled)

4 Press REC.

“AUX Ready” appears in the main display.

5 Start playback on the external equipment.

Sound synchronized recording starts automatically when the sound comes into this unit.

To put a track mark manually while recording, press

SET on the remote control at the place you want.

To stop recording, press 7.

“UTOCwriting” flashes for a while.

– 32 –

Image 36

Contents UX-A70MDR If in Doubt Consult a Competent Electrician Class Laser Product Above ALL Precautions IntroductionContents Location of the Buttons Main unitBecome familiar with the buttons on your unit Main Unit Display windowRemote Control Remote ControlWhen using the remote control Connecting Antennas Getting StartedUnpacking FM antennaConnecting Speakers AM MW/LW antennaTo connect an outdoor AM MW/LW antenna To attach spacersConnecting Other Equipment You can connect the speakers using the speaker cordsTo connect speakers To connect another component such as a cassette deckPutting the Batteries into the Remote Control To stop and cancel the display demonstration, pressTo start the display demonstration manually, press Basic and Common Operations Turning On the Power AC power cord from the AC outletSelecting the Sources and Starting Play To turn on the unit without playing, pressAdjusting the Volume To turn down the volume level temporarilyReinforcing the Bass Sound Selecting the Sound ModesSetting the Display Illumination To set the illumination colorTo create your favorite colors To dim the display illuminationListening to FM and AM MW/LW Broadcasts Tuning in a Station Presetting StationsTo change the FM reception mode Tuning in a Preset Station Receiving FM Stations with RDSChanging the RDS Information Searching for Programs by PTY Codes PTY SearchSwitching to a Program Type of Your Choice Temporarily Alarm function Test functionMore about the EON function Description of the PTY codes Playing Back a CD Basic CD Operations To stop playback for a momentTo locate a particular point in a track during play To go to another trackTo check the program contents Program PlayTo modify the program On the remote control only Playing at Random Random PlayRepeating Tracks Repeat Play To skip the current track, press ¢Playing Back an MD You can play an MD On the main unit only Press MD OPEN/CLOSEInsert an MD into the MD loading slot Press MD #Basic MD Operations Programing the Playing Order of the Tracks Program PlayTo change the information in the main display Random play ends when all the tracks are played once On the remote control only Load an MD Press MD # / 8, thenTo skip the playing track, press ¢ Tracks of the loaded MD will play at randomMain unit Remote control Recording on MDBefore You Start Recording About the track marksTo avoid erasing important recordings To put a track mark manually while recording anPrecautions for performing long-hour stereo recording Stereo Long-Hour Recording MdlpAbout High-Speed Recording To check the remaining recording timeRecording FM/AM MW/LW Broadcasts Recording CD CD Synchronized RecordingPress REC Mode to select the recording mode To record a single track during play or pausePress AUX Start playback on the external equipmentEditing MD Introducing MD Editing Functions Divide Function Join FunctionMove Function + 1 ? appears in the main displayTo divide the joined tracks, see the Divide function Select the track you want to move Press ¢orErase Function ALL Erase FunctionSelect the track you want to erase Press ¢ or Press SET Repeat to select all the tracks you want to eraseAssigning Titles to an MD Press ¯or ¿to change the title entry mode Press SET to enter the selected title entry modeDisc title entry screen appears when you press Track title entry screen appears when you pressChanging the Title Using the Timers Setting the Clock Using Recording TimerHow Recording Timer actually works Using Daily Timer How Daily Timer actually worksTo turn on the Recording Timer, press SET Press ¢or 4 repeatedly to adjust the minute Press SET Volume setting appears in the main displayTo turn on the Daily Timer, press SET If the unit is kept turned on when the timer-on time comesUsing Sleep Timer Timer PriorityHow Sleep Timer actually works Maintenance Cleaning the unitGeneral Notes Handling CDsUtoc User Table Of Contents Additional InformationMD Disc Types Atrac Adaptive TRansform Acoustic Coding/ATRAC3Scms Serial Copy Management System Hcms High-speed Copy Management SystemMD Messages Malfunction has occurred duringMD is not loaded correctly There is no MD Troubleshooting SpecificationsJVC 1100TMMMDWJEM