JVC UX-A70MDR manual Press ¯or ¿to change the title entry mode, Input a character, Set you want

Assigning the Disc Title and Track Title		3 Press ¯or ¿to change the title entry mode.
You can assign a name to each MD and to each track using
alphabetic characters (uppercase and lowercase), symbols
and numerals. Once a title is assigned, it is displayed for					Ex. Track 8 is selected.
your confirmation.
			• Each time you press the button, the title entry mode
• You cannot edit titles composed of more than 64
			changes as follows:
	characters.
			DISC TITLE?			1 TITLE?			2 TITLE?
	About the number of characters inputted for an MD
	The total number of characters that can be input for an MD is		Last track title						3 TITLE?
	1792. The maximum number that can be input for a disc title is
	64, and for each track title, 61. (However, the actual number
	you can input may be slightly less than this maximum numbers	4 Press SET to enter the selected title entry mode.
	due to the MD limitations — see page 48)
	• A space can be counted as one character.
	• When the stereo long-hour recording (LP2 or LP4, see page
	30) method is used for recording, the maximum number you
	can input for a track title automatically reduced since “LP:”
	and a space are automatically added to the beginning of the		Character entry position				Character set
	track title. Consequently this reduces the total number of			Ex. Track 8 has no title.
	characters you can input for an MD.
	Example: You can input up to 10 characters for each track if	5 Input a character.
	an MD is composed of 120 tracks recorded using the stereo
	long-hour recording method.		1) Press DISPLAY/CHARA to select the character
			set you want.
In the following example, the process is explained from the
			• Each time you press the button, the character set
very first — that is, inserting a disc. If you have already
			changes as follows:
started recording or playing, start from step 2.
				Capital letters				Small letters
• To exit from the title entry screen any time during the
	process, press TITLE/EDIT repeatedly.
1 Insert an MD you want to edit into the MD loading					Numerals & Symbols

slot.

2 Press TITLE/EDIT once.	2) Press the character entry button for a character
	you want to input.
The source is changed to “MD.”	Examples:
The MD recorder enters one of the following title entry
	• To input an “A” or “a,” press ABC once.
screen.
	To input a “B” or “b,” press ABC twice.
• Disc title entry screen: appears when you press
	To input a “C” or “c,” press ABC three times.
TITLE/EDIT when the MD recorder stops.
	• To input a symbol, press MARK repeatedly until
	the mark you want appears.
	• To input a numeral, press 0 – 9.
• Track title entry screen: appears when you press	• To move the character entry position while
	entering a title, press ¯or ¿.
TITLE/EDIT while playing, pausing or recording.
	• To enter a space while entering a title, press ¯
	twice.
	• If you have entered an incorrect character, press
	CANCEL to cancel the last entry.

Ex. While playing track 1.

– 39 –