JVC UX-A70MDR manual Move Function, + 1 ? appears in the main display

Page 40

3 Press SET.

“– – – + 1 ?” appears in the main display.

4 Press ¢or 4to select the two adjacent tracks you want to join.

You can also press the number button(s) to directly select the track you want to join.

Ex. When you want to join tracks 1 and 2.

5 Press SET.

“PUSH ENTER” appears in the main display.

If you have selected wrong tracks, press CANCEL, then select the correct tracks.

6 Press ENTER to finish the editing procedure.

“EDITING” appears for a while, then “UTOCwriting” flashes while the editing you have made is being recorded on the MD.

To divide the joined tracks, see the DIVIDE function.

If “CANNOT JOIN” appears in step 5

You cannot join the following tracks.

Tracks recorded using different recording length modes (SP, LP2, LP4). (See page 30)

Digital-recording tracks and analog-recording tracks.

Tracks recorded using monaural long recording method (not possible on this unit) and stereo-recording tracks.

MOVE Function

This function allows you to move a track to the position you prefer. It is useful to change the order of the tracks as you like.

To stop any time during editing process, press

TITLE/EDIT.

1 Insert an MD you want to edit into the MD loading slot.

2 Press TITLE/EDIT repeatedly until “MOVE ?” appears in the main display.

The source is changed to “MD.”

Each time you press TITLE/EDIT, the edit mode changes as follows:

DISC TITLE? DIVIDE ? JOIN ? MOVE ?

Playback mode

 

ALL ERASE?

 

ERASE?

(canceled)

 

 

 

 

 

 

3 Press SET.

+ 1 ?” appears in the main display.

4 Select the track you want to move.

1)Press ¢or 4.

• You can also press the number button(s) directly.

Ex. When you want to move track 2.

2) Press SET.

5 Select the position where you want to move the track to.

1)Press ¢or 4.

• You can also press the number button(s) directly.

EX. When you want to move track 2 to

the position of track 7.

2)Press SET.

“PUSH ENTER” appears in the main display.

If you have selected wrong tracks, press CANCEL, then select the correct tracks.

6 Press ENTER to finish the editing procedure.

“EDITING” appears for a while, then “UTOCwriting” flashes while the editing you have made is being recorded on the MD.

– 36 –

Image 40
Contents UX-A70MDR If in Doubt Consult a Competent Electrician Class Laser Product Above ALL Precautions IntroductionContents Main unit Location of the ButtonsBecome familiar with the buttons on your unit Main Unit Display windowRemote Control Remote ControlWhen using the remote control Connecting Antennas Getting StartedUnpacking FM antennaConnecting Speakers AM MW/LW antennaTo connect an outdoor AM MW/LW antenna To attach spacersConnecting Other Equipment You can connect the speakers using the speaker cordsTo connect speakers To connect another component such as a cassette deckTo stop and cancel the display demonstration, press Putting the Batteries into the Remote ControlTo start the display demonstration manually, press Basic and Common Operations Turning On the Power AC power cord from the AC outletSelecting the Sources and Starting Play To turn on the unit without playing, pressAdjusting the Volume To turn down the volume level temporarilyReinforcing the Bass Sound Selecting the Sound ModesSetting the Display Illumination To set the illumination colorTo create your favorite colors To dim the display illuminationListening to FM and AM MW/LW Broadcasts Presetting Stations Tuning in a StationTo change the FM reception mode Tuning in a Preset Station Receiving FM Stations with RDSChanging the RDS Information Searching for Programs by PTY Codes PTY SearchSwitching to a Program Type of Your Choice Temporarily Test function Alarm functionMore about the EON function Description of the PTY codes Playing Back a CD Basic CD Operations To stop playback for a momentTo locate a particular point in a track during play To go to another trackProgram Play To check the program contentsTo modify the program On the remote control only Playing at Random Random PlayRepeating Tracks Repeat Play To skip the current track, press ¢Playing Back an MD You can play an MD On the main unit only Press MD OPEN/CLOSEInsert an MD into the MD loading slot Press MD #Programing the Playing Order of the Tracks Program Play Basic MD OperationsTo change the information in the main display Random play ends when all the tracks are played once On the remote control only Load an MD Press MD # / 8, thenTo skip the playing track, press ¢ Tracks of the loaded MD will play at randomMain unit Remote control Recording on MDBefore You Start Recording About the track marksTo avoid erasing important recordings To put a track mark manually while recording anPrecautions for performing long-hour stereo recording Stereo Long-Hour Recording MdlpAbout High-Speed Recording To check the remaining recording timeRecording FM/AM MW/LW Broadcasts Recording CD CD Synchronized RecordingPress REC Mode to select the recording mode To record a single track during play or pausePress AUX Start playback on the external equipmentEditing MD Introducing MD Editing Functions Divide Function Join FunctionMove Function + 1 ? appears in the main displayTo divide the joined tracks, see the Divide function Select the track you want to move Press ¢orErase Function ALL Erase FunctionSelect the track you want to erase Press ¢ or Press SET Repeat to select all the tracks you want to eraseAssigning Titles to an MD Press ¯or ¿to change the title entry mode Press SET to enter the selected title entry modeDisc title entry screen appears when you press Track title entry screen appears when you pressChanging the Title Using the Timers Using Recording Timer Setting the ClockHow Recording Timer actually works How Daily Timer actually works Using Daily TimerTo turn on the Recording Timer, press SET Press ¢or 4 repeatedly to adjust the minute Press SET Volume setting appears in the main displayTo turn on the Daily Timer, press SET If the unit is kept turned on when the timer-on time comesTimer Priority Using Sleep TimerHow Sleep Timer actually works Maintenance Cleaning the unitGeneral Notes Handling CDsUtoc User Table Of Contents Additional InformationMD Disc Types Atrac Adaptive TRansform Acoustic Coding/ATRAC3Scms Serial Copy Management System Hcms High-speed Copy Management SystemMalfunction has occurred during MD MessagesMD is not loaded correctly There is no MD Troubleshooting SpecificationsJVC 1100TMMMDWJEM