JVC UX-A70MDR manual Basic MD Operations, Programing the Playing Order of the Tracks Program Play

Page 30
The tracks are played in the order you have programed.
To stop during play, press 7.
The last programed track number and total playing time appear in the main display.
To exit from Program play mode, press PLAY MODE once or twice so that the unit enters another playback mode (Normal play or Random play mode) before or after play.
To check the program contents
Before playing, you can check the program contents by pressing 4or ¢.
• 4: Shows the programed tracks in the reverse order.
• ¢: Shows them in the programed order.
– 26 –
Press MD #/ 8.
5
PRGM
The current track Step No.
Ex. Tracks 5, 7, and 9 have been programed.
• If you stop pressing the buttons for a while, the total playing time will appear in the main display. However, you can continue selecting the tracks.
MD
CD
TRACK
SP
1
2
3
4

Continued

Basic MD Operations

While playing an MD, you can do the following operations.

To stop playback for a moment

Press MD # / 8.

The MD indicators lights on the display and the elapsed playing time starts flashing in the main display.

To resume playback, press MD # / 8 again.

To locate a particular point in a track during play

Press and hold ¢or 4.

•¢ : Fast-forwards the tracks.

•4 : Fast-reverses the tracks.

To go to another track

Press ¢or 4repeatedly.

•¢ : Skips to the beginning of the next or succeeding tracks.

•4 : Goes back to the beginning of the current or previous tracks.

To go to another track directly using the number buttons (on the remote control ONLY)

Pressing the number button(s) allows you to start playing the track number you want.

Ex.: For track number 5, press 5.

For track number 15, press +10, then 5. For track number 20, press +10, then 10.

For track number 32, press +10, +10, +10, then 2.

To change the information in the main display

On the remote control ONLY:

Each time you press DISPLAY/CHARA, the information on the loaded MD changes as follows:

When you press DISPLAY/CHARA while playing or pausing:

The current track number and elapsed playing time = Track title* = Remaining recording time =

The clock time** = (back to the beginning)

When you press DISPLAY/CHARA when the MD recorder stops:

The total track number and total playing time = Disk title* = Remaining recording time = The clock time** = (back to the beginning)

*When track or disk has a title.

**“0:00” appears in the main display, before you set the built-in clock (see page 42.)

Programing the Playing Order of the Tracks

— Program Play

You can arrange the order in which the tracks play before you start playing. You can program up to 32 tracks.

On the remote control ONLY:

Load an MD.

Press MD #/ 8, then 7.

The source is changed to “MD.”

Press PLAY MODE so that “MD PROGRAM” appears in the main display.

The PRGM indicator also lights.

•Each time you press the button, play mode changes as follows:

MD PROGRAM MD RANDOM

Total track number & total playing time

(Normal Play)

Press the number buttons to select the tracks.

•For how to use the number buttons, see “To go to another track directly using the number buttons (on the remote control ONLY)” to the left.

The selected track numbers

5 7 9

Page 29 Page 31
Image 30
Page 29 Page 31
Contents UX-A70MDR If in Doubt Consult a Competent Electrician Class Laser Product Above ALL Precautions IntroductionContents Location of the Buttons Main unitBecome familiar with the buttons on your unit Main Unit Display windowRemote Control Remote ControlWhen using the remote control Unpacking Connecting AntennasGetting Started FM antennaTo connect an outdoor AM MW/LW antenna Connecting SpeakersAM MW/LW antenna To attach spacersTo connect speakers Connecting Other EquipmentYou can connect the speakers using the speaker cords To connect another component such as a cassette deckPutting the Batteries into the Remote Control To stop and cancel the display demonstration, pressTo start the display demonstration manually, press Basic and Common Operations Selecting the Sources and Starting Play Turning On the PowerAC power cord from the AC outlet To turn on the unit without playing, pressReinforcing the Bass Sound Adjusting the VolumeTo turn down the volume level temporarily Selecting the Sound ModesTo create your favorite colors Setting the Display IlluminationTo set the illumination color To dim the display illuminationListening to FM and AM MW/LW Broadcasts Tuning in a Station Presetting StationsTo change the FM reception mode Changing the RDS Information Tuning in a Preset StationReceiving FM Stations with RDS Searching for Programs by PTY Codes PTY SearchSwitching to a Program Type of Your Choice Temporarily Alarm function Test functionMore about the EON function Description of the PTY codes Playing Back a CD To locate a particular point in a track during play Basic CD OperationsTo stop playback for a moment To go to another trackTo check the program contents Program PlayTo modify the program Repeating Tracks Repeat Play On the remote control onlyPlaying at Random Random Play To skip the current track, press ¢Playing Back an MD Insert an MD into the MD loading slot You can play an MDOn the main unit only Press MD OPEN/CLOSE Press MD #Basic MD Operations Programing the Playing Order of the Tracks Program PlayTo change the information in the main display To skip the playing track, press ¢ Random play ends when all the tracks are played onceOn the remote control only Load an MD Press MD # / 8, then Tracks of the loaded MD will play at randomMain unit Remote control Recording on MDTo avoid erasing important recordings Before You Start RecordingAbout the track marks To put a track mark manually while recording anAbout High-Speed Recording Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp To check the remaining recording timeRecording FM/AM MW/LW Broadcasts Recording CD CD Synchronized RecordingPress AUX Press REC Mode to select the recording modeTo record a single track during play or pause Start playback on the external equipmentEditing MD Introducing MD Editing Functions Divide Function Join FunctionTo divide the joined tracks, see the Divide function Move Function+ 1 ? appears in the main display Select the track you want to move Press ¢orSelect the track you want to erase Press ¢ or Erase FunctionALL Erase Function Press SET Repeat to select all the tracks you want to eraseAssigning Titles to an MD Disc title entry screen appears when you press Press ¯or ¿to change the title entry modePress SET to enter the selected title entry mode Track title entry screen appears when you pressChanging the Title Using the Timers Setting the Clock Using Recording TimerHow Recording Timer actually works Using Daily Timer How Daily Timer actually worksTo turn on the Recording Timer, press SET To turn on the Daily Timer, press SET Press ¢or 4 repeatedly to adjust the minute Press SETVolume setting appears in the main display If the unit is kept turned on when the timer-on time comesUsing Sleep Timer Timer PriorityHow Sleep Timer actually works General Notes MaintenanceCleaning the unit Handling CDsMD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic Coding/ATRAC3Scms Serial Copy Management System Hcms High-speed Copy Management SystemMD Messages Malfunction has occurred duringMD is not loaded correctly There is no MD Troubleshooting SpecificationsJVC 1100TMMMDWJEM
Top Page Image Contents