JVC UX-A70MDR manual Maintenance, General Notes, Handling CDs, Handling MDs, Cleaning the unit

Page 50

Maintenance

To get the best performance of the unit, keep your discs and mechanism clean.

General Notes

In general, you will have the best performance by keeping your CDs, MDs and the mechanism clean.

•Store CDs and MDs in their cases, and keep them in cabinets or on shelves.

•Keep the CD trays, and the MD loading slot cover closed when not in use.

Handling CDs

• Remove the CD from its case by holding it at the edge while pressing the center hole lightly.

• Do not touch the shiny surface of the disc, or bend the CD.

•Put the CD back in its case after use to prevent warping.

•Be careful not to scratch the

surface of the CD when placing it back in its case.

• Avoid exposure to direct sunlight, temperature extremes, and moisture.

To clean the CD

Wipe the CD with a soft cloth in a straight line from center to edge.

DO NOT use any solvent — such as conventional record cleaner, spray, thinner, or benzine — to clean the CD.

Handling MDs

• Do not open the shutter.

- The shutter is locked so that it will not open. Trying to force it open will break the MD. If the shutter opens accidentally, close it again quickly without touching the MD inside.

•Do not place MDs in the following places:

- High temperature areas such as in direct sunlight or inside a car.

-High humidity areas, e.g. in a bathroom.

-On a beach or sandy area.

•Clean MDs regularly.

-If dust or dirt gets on cartridge, wipe it off with a soft dry cloth.

Cleaning the unit

•Stains on the unit

Should be wiped off with a soft cloth. If the unit is heavily stained, wipe it with a cloth soaked in water- diluted neutral detergent and wrung well, then wipe clean with a dry cloth.

•Since the unit may deteriorate in quality, become damaged or get its paint peeled off, be careful about the followings.

-DO NOT wipe it with a hard cloth.

-DO NOT wipe it strong.

-DO NOT wipe it with thinner or benzine.

-DO NOT apply any volatile substance such as insecticides to it.

-DO NOT allow any rubber or plastic to remain in contact with it for a long time.

– 46 –

Image 50

Contents UX-A70MDR If in Doubt Consult a Competent Electrician Class Laser Product Above ALL Precautions IntroductionContents Become familiar with the buttons on your unit Location of the ButtonsMain unit Main Unit Display windowWhen using the remote control Remote ControlRemote Control Unpacking Connecting AntennasGetting Started FM antennaTo connect an outdoor AM MW/LW antenna Connecting SpeakersAM MW/LW antenna To attach spacersTo connect speakers Connecting Other EquipmentYou can connect the speakers using the speaker cords To connect another component such as a cassette deckTo start the display demonstration manually, press Putting the Batteries into the Remote ControlTo stop and cancel the display demonstration, press Basic and Common Operations Selecting the Sources and Starting Play Turning On the PowerAC power cord from the AC outlet To turn on the unit without playing, pressReinforcing the Bass Sound Adjusting the VolumeTo turn down the volume level temporarily Selecting the Sound ModesTo create your favorite colors Setting the Display IlluminationTo set the illumination color To dim the display illuminationListening to FM and AM MW/LW Broadcasts To change the FM reception mode Tuning in a StationPresetting Stations Changing the RDS Information Tuning in a Preset StationReceiving FM Stations with RDS Searching for Programs by PTY Codes PTY SearchSwitching to a Program Type of Your Choice Temporarily More about the EON function Alarm functionTest function Description of the PTY codes Playing Back a CD To locate a particular point in a track during play Basic CD OperationsTo stop playback for a moment To go to another trackTo modify the program To check the program contentsProgram Play Repeating Tracks Repeat Play On the remote control onlyPlaying at Random Random Play To skip the current track, press ¢Playing Back an MD Insert an MD into the MD loading slot You can play an MDOn the main unit only Press MD OPEN/CLOSE Press MD #To change the information in the main display Basic MD OperationsPrograming the Playing Order of the Tracks Program Play To skip the playing track, press ¢ Random play ends when all the tracks are played onceOn the remote control only Load an MD Press MD # / 8, then Tracks of the loaded MD will play at randomMain unit Remote control Recording on MDTo avoid erasing important recordings Before You Start RecordingAbout the track marks To put a track mark manually while recording anAbout High-Speed Recording Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp To check the remaining recording timeRecording FM/AM MW/LW Broadcasts Recording CD CD Synchronized RecordingPress AUX Press REC Mode to select the recording modeTo record a single track during play or pause Start playback on the external equipmentEditing MD Introducing MD Editing Functions Divide Function Join FunctionTo divide the joined tracks, see the Divide function Move Function+ 1 ? appears in the main display Select the track you want to move Press ¢orSelect the track you want to erase Press ¢ or Erase FunctionALL Erase Function Press SET Repeat to select all the tracks you want to eraseAssigning Titles to an MD Disc title entry screen appears when you press Press ¯or ¿to change the title entry modePress SET to enter the selected title entry mode Track title entry screen appears when you pressChanging the Title Using the Timers How Recording Timer actually works Setting the ClockUsing Recording Timer To turn on the Recording Timer, press SET Using Daily TimerHow Daily Timer actually works To turn on the Daily Timer, press SET Press ¢or 4 repeatedly to adjust the minute Press SETVolume setting appears in the main display If the unit is kept turned on when the timer-on time comesHow Sleep Timer actually works Using Sleep TimerTimer Priority General Notes MaintenanceCleaning the unit Handling CDsMD Disc Types Utoc User Table Of ContentsAdditional Information Atrac Adaptive TRansform Acoustic Coding/ATRAC3Scms Serial Copy Management System Hcms High-speed Copy Management SystemMD is not loaded correctly There is no MD MD MessagesMalfunction has occurred during Troubleshooting SpecificationsJVC 1100TMMMDWJEM