JVC UX-A70MDR manual Tuning in a Preset Station, Receiving FM Stations with RDS

Page 20

Continued

Tuning in a Preset Station

On the remote control ONLY:

1 Press FM/AM.

The unit automatically turns on and tunes in the previously tuned station (either FM or AM–MW/LW.)

•Each time you press the button, the band alternates between FM and AM (MW/LW.)

2 Press the number buttons to select a preset number.

Ex. For preset number 5, press 5.

For preset number 15, press +10, then 5. For preset number 20, press +10, then 10.

For preset number 30, press +10, +10, then 10.

Receiving FM Stations with RDS

RDS allows FM stations to send an additional signal along with their regular program signals. For example, the stations send their station names, as well as information about what type of program they broadcast, such as sports or music, etc.

When tuned to an FM station which provides the RDS service, the RDS indicator lights on the display.

With the unit, you can receive the following types of RDS signals.

PS (Program Service):

Shows commonly known station names.

PTY (Program Type):

Shows types of broadcast programs.

RT (Radio Text):

Shows text messages the station sends.

EON (Enhanced Other Networks):

Provides the information about the types of the programs sent by other RDS stations than the one being received.

RDS operations are possible only using the remote control. You must press and hold RDS CONTROL while using the buttons printed in orange on the remote control — PTY, EON, DISPLAY, SELECT –/+.

More about RDS

•Not all FM stations provide RDS signals, nor do all RDS stations provide the same services. If in doubt, check with local radio stations for details on RDS in your area.

•RDS may not work correctly if the received station is not transmitting the signals properly or if the signal strength is weak.

Changing the RDS Information

You can see RDS information on the display while listening to an FM station.

On the remote control ONLY:

1 While listening to an FM station, press and hold RDS CONTROL until you finish the following procedure.

2 Press DISPLAY.

•Each time you press the button, the display changes to show the following information:

 

PS

PTY

 

(Program Service)

(Program Type)

 

Off

RT

 

(Return to the last

(Radio Text)

3

received station)

 

Release your finger from RDS CONTROL.

If no PS, PTY, or RT signals are sent by a station

“NO PS,” “NO PTY” or “NO RT” appears in the main display.

If the unit takes time to show the RDS information received from a station

“WAIT PS,” “WAIT PTY,” or “WAIT RT” may appear in the main display.

Searching for Programs by PTY Codes (PTY Search)

One of the advantages of RDS is that you can locate a particular kind of program by specifying the PTY codes.

•The PTY Search is applicable only to the preset stations.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the remote control ONLY:

1 While listening to an FM station, press and hold RDS CONTROL until you finish the following procedure.

2 Press PTY.

“PTY SELECT” appears in the main display.

– 16 –

Page 19 Page 21
Image 20
Page 19 Page 21
Contents UX-A70MDR If in Doubt Consult a Competent Electrician Class Laser Product Above ALL Precautions IntroductionContents Become familiar with the buttons on your unit Location of the ButtonsMain unit Main Unit Display windowWhen using the remote control Remote ControlRemote Control Connecting Antennas Getting StartedUnpacking FM antennaConnecting Speakers AM MW/LW antennaTo connect an outdoor AM MW/LW antenna To attach spacersConnecting Other Equipment You can connect the speakers using the speaker cordsTo connect speakers To connect another component such as a cassette deckTo start the display demonstration manually, press Putting the Batteries into the Remote ControlTo stop and cancel the display demonstration, press Basic and Common Operations Turning On the Power AC power cord from the AC outletSelecting the Sources and Starting Play To turn on the unit without playing, pressAdjusting the Volume To turn down the volume level temporarilyReinforcing the Bass Sound Selecting the Sound ModesSetting the Display Illumination To set the illumination colorTo create your favorite colors To dim the display illuminationListening to FM and AM MW/LW Broadcasts To change the FM reception mode Tuning in a StationPresetting Stations Tuning in a Preset Station Receiving FM Stations with RDSChanging the RDS Information Searching for Programs by PTY Codes PTY SearchSwitching to a Program Type of Your Choice Temporarily More about the EON function Alarm functionTest function Description of the PTY codes Playing Back a CD Basic CD Operations To stop playback for a momentTo locate a particular point in a track during play To go to another trackTo modify the program To check the program contentsProgram Play On the remote control only Playing at Random Random PlayRepeating Tracks Repeat Play To skip the current track, press ¢Playing Back an MD You can play an MD On the main unit only Press MD OPEN/CLOSEInsert an MD into the MD loading slot Press MD #To change the information in the main display Basic MD OperationsPrograming the Playing Order of the Tracks Program Play Random play ends when all the tracks are played once On the remote control only Load an MD Press MD # / 8, thenTo skip the playing track, press ¢ Tracks of the loaded MD will play at randomMain unit Remote control Recording on MDBefore You Start Recording About the track marksTo avoid erasing important recordings To put a track mark manually while recording anPrecautions for performing long-hour stereo recording Stereo Long-Hour Recording MdlpAbout High-Speed Recording To check the remaining recording timeRecording FM/AM MW/LW Broadcasts Recording CD CD Synchronized RecordingPress REC Mode to select the recording mode To record a single track during play or pausePress AUX Start playback on the external equipmentEditing MD Introducing MD Editing Functions Divide Function Join FunctionMove Function + 1 ? appears in the main displayTo divide the joined tracks, see the Divide function Select the track you want to move Press ¢orErase Function ALL Erase FunctionSelect the track you want to erase Press ¢ or Press SET Repeat to select all the tracks you want to eraseAssigning Titles to an MD Press ¯or ¿to change the title entry mode Press SET to enter the selected title entry modeDisc title entry screen appears when you press Track title entry screen appears when you pressChanging the Title Using the Timers How Recording Timer actually works Setting the ClockUsing Recording Timer To turn on the Recording Timer, press SET Using Daily TimerHow Daily Timer actually works Press ¢or 4 repeatedly to adjust the minute Press SET Volume setting appears in the main displayTo turn on the Daily Timer, press SET If the unit is kept turned on when the timer-on time comesHow Sleep Timer actually works Using Sleep TimerTimer Priority Maintenance Cleaning the unitGeneral Notes Handling CDsUtoc User Table Of Contents Additional InformationMD Disc Types Atrac Adaptive TRansform Acoustic Coding/ATRAC3Scms Serial Copy Management System Hcms High-speed Copy Management SystemMD is not loaded correctly There is no MD MD MessagesMalfunction has occurred during Troubleshooting SpecificationsJVC 1100TMMMDWJEM
Top Page Image Contents