JVC UX-A70MDR manual Divide Function, Join Function

Page 39

DIVIDE Function

This function allows you to divide one track into two separate tracks. It is useful, for example, when you want to add track marks at a certain point within a track or if you want to separate a recording.

•To stop any time during editing process, press

TITLE/EDIT.

1 Insert an MD you want to edit into the MD loading slot.

2 Press TITLE/EDIT repeatedly until “DIVIDE ?” appears in the main display.

The source is changed to “MD.”

•Each time you press TITLE/EDIT, the edit mode changes as follows:

DISC TITLE? DIVIDE ? JOIN ? MOVE ?

Playback mode

 

ALL ERASE?

 

ERASE?

(canceled)

 

 

 

 

 

 

3 Press SET.

The unit starts playing back the first track (or the current track.)

4 Press ¢or 4to select the track you want to divide.

The unit starts playing back the selected track.

•You can also press the number button(s) to directly select the track you want to divide.

•If you do not press ¢, 4, or the number button(s), the current track is played back repeatedly.

5 Press SET when you find the point where you want to divide the track.

“POSIT. 0?” appears in the main display, and the unit repeats the selected point — a 3-second period following the dividing point.

•If the dividing point is satisfactory, go to step 7.

•If not, go to the next step.

6 Press ¯or ¿to adjust the dividing point precisely.

When you stop pressing the buttons, the unit repeats the newly selected dividing point.

•You can shift the dividing point up to ±128. This range (±128) corresponds to approximately ±8 seconds* from the original point (Position 0).

Ex. The dividing point is shifted to “– 21.”

*When “SP” is selected for the recording length mode. For “LP2,” it is approximately ±16 seconds, and for “LP4” approximately ±32 seconds.

•When you find the right position, go to the next step.

•If you want to cancel the dividing point, press CANCEL, then select the correct dividing point.

7 Press SET.

“PUSH ENTER” appears in the main display.

8 Press ENTER to finish the editing procedure.

“EDITING” appears for a while, then “UTOCwriting” flashes while the editing you have made is being recorded on the MD.

To join the divided tracks again, see the JOIN Function.

JOIN Function

This function allows you to join two adjacent tracks into one track.

•To stop any time during editing process, press

TITLE/EDIT.

1 Insert an MD you want to edit into the MD loading slot.

2 Press TITLE/EDIT repeatedly until “JOIN ?” appears in the main display.

The source is changed to “MD.”

•Each time you press TITLE/EDIT, the edit mode changes as follows:

DISC TITLE? DIVIDE ? JOIN ? MOVE ?

Playback mode

 

ALL ERASE?

 

ERASE?

(canceled)

 

 

 

 

 

 

– 35 –

Page 38 Page 40
Image 39
Page 38 Page 40
Contents UX-A70MDR If in Doubt Consult a Competent Electrician Class Laser Product Above ALL Introduction PrecautionsContents Location of the Buttons Main unitBecome familiar with the buttons on your unit Display window Main UnitRemote Control Remote ControlWhen using the remote control FM antenna Connecting AntennasGetting Started UnpackingTo attach spacers Connecting SpeakersAM MW/LW antenna To connect an outdoor AM MW/LW antennaTo connect another component such as a cassette deck Connecting Other EquipmentYou can connect the speakers using the speaker cords To connect speakersPutting the Batteries into the Remote Control To stop and cancel the display demonstration, pressTo start the display demonstration manually, press Basic and Common Operations To turn on the unit without playing, press Turning On the PowerAC power cord from the AC outlet Selecting the Sources and Starting PlaySelecting the Sound Modes Adjusting the VolumeTo turn down the volume level temporarily Reinforcing the Bass SoundTo dim the display illumination Setting the Display IlluminationTo set the illumination color To create your favorite colorsListening to FM and AM MW/LW Broadcasts Tuning in a Station Presetting StationsTo change the FM reception mode Searching for Programs by PTY Codes PTY Search Tuning in a Preset StationReceiving FM Stations with RDS Changing the RDS InformationSwitching to a Program Type of Your Choice Temporarily Alarm function Test functionMore about the EON function Description of the PTY codes Playing Back a CD To go to another track Basic CD OperationsTo stop playback for a moment To locate a particular point in a track during playTo check the program contents Program PlayTo modify the program To skip the current track, press ¢ On the remote control onlyPlaying at Random Random Play Repeating Tracks Repeat PlayPlaying Back an MD Press MD # You can play an MDOn the main unit only Press MD OPEN/CLOSE Insert an MD into the MD loading slotBasic MD Operations Programing the Playing Order of the Tracks Program PlayTo change the information in the main display Tracks of the loaded MD will play at random Random play ends when all the tracks are played onceOn the remote control only Load an MD Press MD # / 8, then To skip the playing track, press ¢Recording on MD Main unit Remote controlTo put a track mark manually while recording an Before You Start RecordingAbout the track marks To avoid erasing important recordingsTo check the remaining recording time Precautions for performing long-hour stereo recordingStereo Long-Hour Recording Mdlp About High-Speed RecordingRecording CD CD Synchronized Recording Recording FM/AM MW/LW BroadcastsStart playback on the external equipment Press REC Mode to select the recording modeTo record a single track during play or pause Press AUXEditing MD Introducing MD Editing Functions Join Function Divide FunctionSelect the track you want to move Press ¢or Move Function+ 1 ? appears in the main display To divide the joined tracks, see the Divide functionPress SET Repeat to select all the tracks you want to erase Erase FunctionALL Erase Function Select the track you want to erase Press ¢ orAssigning Titles to an MD Track title entry screen appears when you press Press ¯or ¿to change the title entry modePress SET to enter the selected title entry mode Disc title entry screen appears when you pressChanging the Title Using the Timers Setting the Clock Using Recording TimerHow Recording Timer actually works Using Daily Timer How Daily Timer actually worksTo turn on the Recording Timer, press SET If the unit is kept turned on when the timer-on time comes Press ¢or 4 repeatedly to adjust the minute Press SETVolume setting appears in the main display To turn on the Daily Timer, press SETUsing Sleep Timer Timer PriorityHow Sleep Timer actually works Handling CDs MaintenanceCleaning the unit General NotesAtrac Adaptive TRansform Acoustic Coding/ATRAC3 Utoc User Table Of ContentsAdditional Information MD Disc TypesHcms High-speed Copy Management System Scms Serial Copy Management SystemMD Messages Malfunction has occurred duringMD is not loaded correctly There is no MD Specifications TroubleshootingJVC 1100TMMMDWJEM
Top Page Image Contents