JVC RX-1024VBK manual Receiving Radio Broadcasts, Tuning in Stations Manually, Using Preset Tuning

Receiving Radio Broadcasts

You can browse through all the stations or use the preset function to go immediately to a particular station.

	IMPORTANT:
AUDIO/	When using the Remote Control, check to see if its remote control
TV/VCR	mode selector is set to the correct position:
CATV
DBS	To operate this receiver, set it to “AUDIO/TV/VCR” (except when
	selecting the DBS tuner as the source).

Tuning in Stations Manually

On the front panel:

1. Press FM/AM TUNING to select the band. FM/AM TUNING

Each time you press the button, the band alternates between

FM and AM.

MULTI JOG

2.Turn MULTI JOG until you find the frequency you want.

•Turning it clockwise increases the frequency.

•Turning it counterclockwise decreases the frequency.

Notes:

• When you turn MULTI JOG

quickly or hold the TUNING

UP or TUNING DOWN in step

2, the frequency keeps

changing until a station is

tuned in.

• When a station of sufficient

signal strength is tuned in, the

From the remote control:

1.Press FM or AM to select the band.

2.Press TUNING DOWN or TUNING UP repeatedly until you find the frequency you want.

Using Preset Tuning

AMFM

/REWFF/

DOWN TUNING UP

TUNED indicator lights up on

the display.

When an FM stereo program

is received, the STEREO

indicator also lights up.

Once a station is assigned to a channel number, the station can be quickly tuned. You can preset up to 40 stations at random.

To store the preset stations

On the front panel only:

1.Tune in the station you want to preset (see above).

If you want to store the FM reception mode for this station, select the FM reception mode you want. See page 24 for details.

Note:

You can use the 10 keys on the remote control to select the preset number. When using the 10 keys, be sure that they are

2.Press TUNER/SEA MEMORY.

“CH-” appears and the channel number position starts flashing on the display for about 5 seconds.

3.Turn MULTI JOG to select a channel number while the channel number position is flashing.

4.Press TUNER/SEA MEMORY again while the selected channel number is flashing on the display. The selected channel number stops flashing.

The station is assigned to the selected channel number.

TUNER/SEA MEMORY

MULTI JOG

TUNER/SEA MEMORY

activated for tuner, not for the CD and others. (See page 58.)

23