JVC RX-1024VBK manual Adjusting the Front Speaker Output Balance Also see

Page 45

Adjusting the Front Speaker Output Balance (Also see page 18)

1.Press any button of ON SCREEN CONTROL %/ Þ / @/ #once. The MAIN MENU appears on the TV.

2.Press ON SCREEN CONTROL % / Þ to move to “SOUND CONTROL,” then press @ / #.

The SOUND CONTROL menu appears on the TV.

3.Press ON SCREEN CONTROL % / Þ to move to “BAL.” (Balance).

4.Press ON SCREEN CONTROL @ / #to adjust the balance.

5.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Listening at Low Volume (Loudness) (Also see page 18)

1.Press any button of ON SCREEN CONTROL %/ Þ / @/ #once. The MAIN MENU appears on the TV.

2.Press ON SCREEN CONTROL % / Þ to move to “SOUND CONTROL,” then press @ / #.

The SOUND CONTROL menu appears on the TV.

3.Press ON SCREEN CONTROL %/ Þ to move to “LOUDNESS.”

4.Press ON SCREEN CONTROL @ / #to turn the loudness “ON” or “OFF.”

5.When you finish, press EXIT repeatedly until the menu disappears from the TV.

Attenuating the Input Signal (Also see page 15)

This function is available only for the sources connected using the analog terminals, and takes effect only when the DSP mode is in use.

1.Press any button of ON SCREEN CONTROL %/ Þ / @/ #once. The MAIN MENU appears on the TV.

2.Press ON SCREEN CONTROL % / Þ to move to “SOUND CONTROL,” then press @ / #.

The SOUND CONTROL menu appears on the TV.

3.Press ON SCREEN CONTROL %/ Þ to move to “INPUT ATT.”

4.Press ON SCREEN CONTROL @ / #to turn the function on (“ATT ON”) or off (“NORMAL”).

5.When you finish, press EXIT repeatedly until the menu disappears from the TV.

MAIN MENU

MAIN MENU

SOURCE :VCR1￿

VISUAL :VCR1￿

MODE :OFF￿

￿

**

TUNERSOUND CONTROLCONTROL￿￿

**

**

SETTING ￿

**

**￿

 

**

￿:ENTER

VOLUME : 20

SOUND CONTROL menu

SOUND CONTROL

￿

** SURROUND LEVEL￿ **

**￿ SEA￿ **

BAL.:R-21￿

LOUDNESS : OFF￿

INPUT ATT : NORMAL￿

SUBWFR LEVEL: 0dB￿ ￿

NEXT PAGE :OPERATE

SOUND CONTROL menu

SOUND CONTROL

￿

** SURROUND LEVEL￿ **

**￿ SEA￿ **

BAL.:R-21￿

LOUDNESS : OFF￿ INPUT ATT : NORMAL￿ SUBWFR LEVEL: 0dB￿ ￿

NEXT PAGE :OPERATE

SOUND CONTROL menu

SOUND CONTROL

￿

** SURROUND LEVEL￿ **

**￿ SEA￿ **

BAL.:R-21￿

LOUDNESS : OFF￿ INPUT ATT : NORMAL￿

SUBWFR LEVEL: 0dB￿ ￿

NEXT PAGE :OPERATE

42

Page 44 Page 46
Image 45
Page 44 Page 46
Contents RX-1024VBK To Reduce the Risk of Electric Shock Large Small Large Small NoneOFF MID MAX Table of Contents Using the DSP Modes Parts Identification Front Panel Remote ControlGeneral Getting StartedLocations Handling the receiverGetting Started Connecting the FM and AM AntennasFM Antenna Connections AM Antenna ConnectionsConnecting the Speakers Connecting the front speakersConnecting the rear and center speakers Connecting the subwoofer speakerTo enhance your audio system Analog connections Connecting Audio/Video ComponentsAudio Components Video Components Audio component connectionsVideo components Video component connectionsIf your video components have an AV Compu Link terminal Connecting DVD playerDigital 1 coaxial For Digital connectionsPutting Batteries in the Remote Control Connecting the Power CordTurning the Power On and Off From the remote controlBasic Operations On the front panelTo increase the volume, press Volume + Adjusting the VolumeTo decrease the volume, press Volume Press one of the source selecting buttons directlyFrom the remote control only Basic OperationsOn the front panel only Adjusting the Subwoofer Output Level Attenuating the Input SignalPress Sound Recording a SourceSelecting the Input Mode Basic SettingsSelecting the DBS tuner as the source Changing the Source NameSetting the Subwoofer Information Adjusting the Front Speaker Output BalanceListening at Low Volume Loudness YESDigital Input Digital in Terminal Setting Basic SettingsSetting the Speakers for the DSP Modes Front, Center, and Rear Speaker SettingCenter Delay Time Setting Rear Delay Time SettingCrossover Frequency Setting Dynamic Range Compression Setting Low Frequency Effect Attenuator SettingCOMP. OFF COMP. MIDTo recall the sound settings To store the sound settingsTo cancel the One Touch Operation function One Touch OperationUsing Preset Tuning Tuning in Stations ManuallyTo store the preset stations Receiving Radio BroadcastsSelecting the FM Reception Mode To erase a stored preset stationAuto MonoAssigning Names to Preset Stations Receiving Radio BroadcastsTo erase the input characters Using the SEA Modes Selecting Your Favorite SEA ModeTo cancel the SEA mode Creating Your Own SEA Mode Using the SEA ModesTo recall your own SEA adjustment To erase a stored adjustmentOn the 3D-PHONIC mode Using the DSP ModesOn the DAP mode On Surround modeUsing the 3D-PHONIC Modes Using the DSP ModesAs you turn it, the effect level changes as follows To cancel the 3D-PHONIC modePress Effect to select the effect level You want appears on the displayUsing the DAP Modes Press Surround Mode repeatedly until the mode you To cancel the DAP modeAdjust the speaker output levels as follows Want appears on the displayUsing the Dolby Digital and Dolby Pro Logic Modes Press Surround Mode repeatedly until PRO LogicOr Dolby Digital appears on the display To cancel the Surround mode Adjusted levels are also shown on the equalizer displayPress Surround Mode repeatedly until OFF appears Press Test to start checking the speaker output balanceLights up Press Dolby Surround so that the lamp on the buttonTurn Multi JOG to select the center tone level you want Press Dolby Surround again so that Surround OFF appearsPress Surround Mode repeatedly until Theater Using the Theater Surround ModeKeys are activated for sound adjustments Or DIG-THEATER appears on the displayTo cancel the Theater Surround mode Press Test again to stop the test tonePress Cntr Tone to select the center tone level you want DSP and Theater indicators also light up on the display SOFT2 SOFT1 Flat SHARP1 When you select OSD, see Using the On-Screen MenusSelecting the Source to Play Also see Selecting the Different Sources for Picture and SoundListening at Low Volume Loudness Also see Adjusting the Front Speaker Output Balance Also seeAttenuating the Input Signal Also see Sound Control menu appears on the TVAdjusting the Subwoofer Output Level Also see Using the On-Screen MenusFor 3D-PHONIC modes For DAP modes Live CLUB, Dance CLUB, HALL, PavilionFor Dolby Surround Pro Logic Selecting Your Favorite SEA Mode Also seeFor Dolby Digital For Theater Surround and Digital Theater SurroundCreating Your Own SEA Mode Also see Basic SettingsPress SET to store the setting into the SEA Usermode Operating the Tuner Storing the Preset Stations Also seeCharacter entry screen appears Assigning Names to the Preset Stations Also seeRemote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemAutomatic Source Selection Synchronized RecordingDisplaying the Disc Information on the TV screen Text Compu Link Remote Control SystemDisc Search Only for CD Player Additional FunctionsShowing the Disc Information on the TV Screen OperationsSearching a Disc Only for the CD player Text Compu Link Remote Control SystemSearch a disc by its performer Search a disc by its disc titleSearch a disc by its genre Going back to the Disc Title Search screen Press ExitPress on Screen Control %/ Þ to move to GENRE, then press SETGoing back to the User File screen Press Exit Using your own User FilesFor the CD Player with the disc memory function Entering the Disc InformationTitle Input Performer screen appears on the TV To move to Shift , then press SETFor the MD recorder Enter the disc title, referring to steps 3 and 4 onEnter the song title, referring to steps 3 and 4 on Cables with the monaural mini-plugs not supplied AV Compu Link Remote Control SystemConnect to the terminal indicated Illustration Do not connect to the TV terminalAutomatic Power On/Off Standby Automatic Selection of TV’s Input ModeOne-Touch Video Play One-Touch DVD PlayOperating JVC’s Audio/Video Components Pause REC Operating JVC’s Audio/Video ComponentsREW REW Play Down Tuning REC TV/VIDEO Stop Pause Following buttons can be used for operating the TV Operating Other Manufactures’ ComponentsOperating Other Manufactures’ Components Set the remote control mode selector to CatvChannel + 10, 0, 100++10Try to operate your VCR by pressing VCR1 Power Starts playbackPauses Manufacturers’ codes for TV Manufacturers’ codes for Catv converters STS Problem Possible Cause Solution TroubleshootingAmplifier SpecificationsFM tuner IHF HOW to Locate Your JVC Service Center Limited Warranty AUDIO-2 0598OFMMDWJEM

RX-1024VBK specifications

The JVC RX-1024VBK is a sophisticated AV receiver designed to enhance the home entertainment experience. This multi-channel receiver is crafted to meet the demands of audio enthusiasts and casual listeners alike, delivering impressive sound quality and a variety of features that make it a standout option in its class.

One of the main features of the RX-1024VBK is its 5.1 channel surround sound capability. This means it can support up to five speakers and one subwoofer, allowing users to immerse themselves in a rich and dynamic audio environment. With a power output of 100 watts per channel, the receiver can fill a medium to large room with high-quality sound without distortion.

The RX-1024VBK incorporates advanced audio technologies such as Dolby Digital, DTS, and Virtual Surround. These surround sound formats provide an authentic cinematic experience by recreating the depth and clarity of audio found in movie theaters. Additionally, the receiver features a robust equalizer that allows users to customize audio settings to perfectly match their speaker configuration and personal preferences.

Connectivity is another strength of the JVC RX-1024VBK. It includes multiple HDMI inputs for connecting various devices like Blu-ray players, gaming consoles, and streaming devices. This functionality allows for convenient switching between sources, ensuring that users can enjoy their favorite content without hassle. The HDMI inputs also support 4K pass-through, enabling high-resolution video output and future-proofing the system for upcoming content.

The receiver also features built-in FM/AM radio with a preset capability, allowing users to save their favorite stations for easy access. An integrated USB port allows for direct playback of media files from USB drives, while line-in connections make it easy to connect older devices.

One notable feature is its sleek design, which fits well into any home audio setup. The user interface is intuitive, making navigation easy for all users.

Overall, the JVC RX-1024VBK combines performance, versatility, and aesthetic appeal, making it a solid choice for those looking to enhance their home entertainment system. With its blend of powerful audio technologies and user-friendly features, the RX-1024VBK is well-equipped to deliver an exceptional listening experience.
Top Page Image Contents