Safety regulations:
3.9.3 Work on the engine
Drain the engine oil at operating temperature – Danger of scalding!
Wipe away any spilt oil, collect drained oil and dispose of in an environmentally responsible manner. Keep used
filters and other
3.9.4 Work on parts of the electrical system
•Before performing work on the electrical system, disconnect the battery and cover with isolating material.
•Do not use fuses with a higher amperage or repair fuses. Fire hazard!
3.9.5 Work on the battery
•When carrying out work at the battery, never smoke or expose to a naked fl ame.
•Do not allow acid to contact hands or clothing. In case of injury due to acid spillage, rinse with clear water and consult a doctor.
•Never place any tools on the battery.
•Dispose of old batteries in compliance with regulations.
3.9.6 Work on the fuel system
•No naked fl ames, no smoking, do not spill fuel.
•Collect emerging fuel, do not allow to seep into the ground and dispose of in an environmentally friendly manner.
3.9.7 Cleaning work
•Never carry out cleaning work with the engine running.
•Never use petrol or other easily fl ammable materials for cleaning.
•When cleaning using a steam jet cleaning device, cover all electrical parts and the insulating material or do not expose to direct water or steam jet.
•Do not direct the cleaning jet into the silencer.
3.9.8 After completing maintenance work
•All protective devices must be replaced after cleaning and maintenance work.
•Carry out function checks.
3.10 Repairs
If the machine is defective, hang a warning sign on the machine. Repairs may only be performed by qualifi ed and specially commissioned personnel.
18